Abstract:Clearances exist in different kinds of joints in multibody mechanical systems, which could drastically affect the dynamic behavior of the system. If the joint is dry with no lubricant, impact occurs, resulting in wear and tear of the joint. In practical engineering design of machines, joints are usually designed to operate with some lubricant. Lubricated journal bearings are designed so that even when the maximum load is applied, the joint surfaces do not come into contact with each other. In this paper, a general methodology for modeling lubricated long journal bearings in multibody mechanical systems is presented. This modeling utilizes a method of solving for the forces produced by the lubricant in a dynamically loaded long journal bearing. A perfect revolute joint in a multibody mechanical system imposes kinematic constraints, while a lubricated journal bearing joint imposes force constraints. As an application, the dynamic response of a slider-crank mechanism including a lubricated journal bearing joint between the connecting rod and the slider is considered and analyzed. The dynamic response is obtained by numerically solving the constraint equations and the forces produced by the lubricant simultaneously with the differential equations of motion and a set of initial conditions numerically. The results are compared with the previous studies performed on the same mechanism as well a dry clearance joint. It is shown that in a multibody mechanical system, the journal bearing lubricant introduces damping and stiffness to the system. The earlier studies predict that the order of magnitude of the reaction moment is twice that of a perfect revolute joint. The proposed model predicts that the reaction moment is within the same order of magnitude of the perfect joint simulation case.

Multiscale Modelling and Analysis on the Heavy-duty Hydrostatic Journal Bearing for a Precision Press Machine

Thermo-Mechanical Coupling Analysis of the Actuating Mechanism in a High Speed Press

Analysis of maximum radial load capacity of hydrostatic journal bearing considering supply pressure limitation by a novel method

Active hybrid journal bearings with lubrication control: Towards machine learning

Numerical Investigation of Static Characteristic of a Tilting-Pad Journal Bearing Using Shear Stress Transport Model and Air Backflow

Numerical simulation of the dynamic fluid–solid coupling in journal bearing with the effect of surface topography in consideration

Investigation on static and dynamic characteristics of high-speed and heavy-load tilting pad journal bearings

Multi-Body Dynamic Analysis of Hydrostatic Bearing with the MMC Material in Micro-Nano Machining

Composite thermal oil film lubrication model for hybrid journal bearings

Numerical analysis of the lubricating gap between the gear shaft and the journal bearing in water hydraulic internal gear pumps

Modelling Non-Gaussian Surfaces and Misalignment for Condition Monitoring of Journal Bearings

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

Research on the Support Performance of Internal Feedback Hydrostatic Thrust and Journal Bearing Considering Load Effect

Thermo-hydrodynamic analysis of large-eccentricity hydrodynamic bearings with texture on journal surface

A Thermohydrodynamic Analysis of Dynamic Coefficients of a Elliptical Journal Bearing Using One-Dimensional Model

Investigation on lubrication characteristics and deformation control of hydrostatic bearing workbench

Dynamics of a Multibody Mechanical System With Lubricated Long Journal Bearings

An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems

An analytical model for complete dynamical coefficients of a tilting-pad journal bearing

A Study of Misaligned Compliant Journal Bearings Lubricated by Non-Newtonian Fluid Considering Surface Roughness

Thermal-structure interactions on the nonlinear behavior of the heavy-load mechanical press with multiple clearance-induced joints