Abstract:Effects of temperature, relative humidity and CO2 concentration on carbonation depth of concrete were investigated, and the variation laws of concrete carbonation depth under coupling effects of environment factors were also studied. A novel prediction model of carbonation depth including component materials and environment factors was proposed on basis of the measured data. The distributions of the relative content of products in concrete, i.e., Ca(OH)2, calcium–silicate–hydrate and hydrated–calcium–aluminate, and pH value were determined through dimensionless processing. Also, the time-dependent curves of concrete carbonation depth were simulated, and a novel method to evaluate the carbonated acceleration rate or time similarity rate of concrete carbonation depth between simulated and natural environment was proposed. The results show that the effects of temperature, relative humidity, CO2 concentration on the carbonation depth are significant, and there are exponential function, power function and polynomial function between carbonation depth of concrete and temperature, CO2 concentration and relative humidity, respectively. The similarities and differences of carbonation depth of concrete under the coupled effects of environmental factors can be found in the characteristic of 3D camber figure and the isopleth of projection plane. Phase composition, hydration products and microstructure of concrete change significantly before and after carbonation. The XRD spectrum and ESEM images reveal that the dominant carbonation product is calcium carbonate. Temperature and CO2 concentration affect the crystal form and practical size of carbonated products, respectively, and the relative humidity changes the compactness of micro structure, quantity of micro pore and cross-sectional characteristic. In addition, the activation energy of carbonation in concrete was also calculated.

Quantifying Partially-Carbonated Profiles of Concrete with Low Water/Binder Ratio Exposed to Natural Carbonation

Application of Infrared Spectroscopy in the Measurement of Carbonation Depth of Concrete

Carbonation Curing of Industrial Solid Waste‐based Aerated Concretes

Comparison of detection methods for carbonation depth of concrete

Description of the concrete carbonation process with adjusted depth-resolved thermogravimetric analysis

Carbonation and Related Behaviors of Hardened Cement Pastes under Different Hydration Degrees

Quantitative Analysis of Carbonation Degree of Mortar Based on Multiple Interactive Influences

Effect of Isobutyl-Triethoxy-silane Penetrative Protective Agent on the Carbonation Resistance of Concrete

Investigations on Atmospheric Carbonation Corrosion of Concrete Structure Beam Exposed to Real Marine-Environment for 7 Years

Carbonation behavior of calcium silicate hydrate (C-S-H): Its potential for CO2 capture

Carbonation Process Simulation for Cement-Based Materials Based on Microstructure by a Cement Hydration Model

Carbonation depth model and carbonated acceleration rate of concrete under different environment

CARBONATION OF CONCRETE CONTAINING MINERAL ADMIXTURE IN NORMAL INDOOR ENVIRONMENT

XRD and 29Si MAS NMR study on carbonated cement paste under accelerated carbonation using different concentration of CO2

Quantitative evaluation of cement paste carbonation using Raman spectroscopy

Development of more accurate methods for determining carbonation depth in cement-based materials

Influence of Carbonation on the Chloride Ingress into Concrete: Theoretical Analysis and Application to Durability Design

Carbonation of blast furnace slag concrete at different CO 2 concentrations: Carbonation rate, phase assemblage, microstructure and thermodynamic modelling

Impact of Carbonation on the Chloride Diffusivity in Concrete: Experiment, Analysis and Application

Mechanism Analysis on Carbonation of Hardened Cement Paste with XCT

Effects of CO2 Concentration and the Uptake on Carbonation of Cement-Based Materials