Abstract:Enhanced QS‐DSSC efficiency using mixed salt‐based PVDF‐co‐HFP PGE. Developed specifically to address leakage and stability concerns inherent in liquid electrolytes, this study presents a significant advancement in polymer gel electrolyte (PGE) formulation by combining potassium iodide (KI), ammonium iodide (AI) salts, and polyvinylidene fluoride‐co‐hexafluoropropylene (PVDF‐co‐HFP) as a host polymer. The tape casting method was employed to deposit the standard TiO2 paste as the photoanode and platinum paste as the counter electrode. N3 dye was incorporated, and PVDF‐co‐HFP was used as the PGE between the electrodes. The conductivity of PGE was measured by using a digitized conductivity meter. The quasi solid‐state solar cell (QS‐DSSC) assembled using single salts (KI, and AI), and mixed cations PGE was examined via photocurrent–voltage characteristics, and electrochemical impedance spectroscopy. The augmented ionic conductivity directly influences the efficiency of DSSCs. Notably, incorporating a mixed salt (KI + AI) within the PGE enhances ionic conductivity compared to single‐salt‐based counterparts. The resultant DSSCs using mixed salt PGE exhibit a Voc of 600 mV, Jsc of 1.01 mA/cm2, FF of 0.6089, and an efficiency of 0.369%, outperforming those using KI or AI. This highlights the perceptible advantages of employing this innovative electrolyte composition to enhance solar cell performance.

Improvement of the Photovoltaic Performance of Dye-Sensitized Solar Cells by Using Mesoporous Carbon in Polyvinylidene Fluoride/1-Methyl-3-Hexylimidazolium Iodide Gel Electrolyte

A Novel Composite Polymer Electrolyte Containing Room-Temperature Ionic Liquids and Heteropolyacids for Dye-Sensitized Solar Cells

A quasi-solid-state dye-sensitized solar cell based on porous polymer electrolyte membrane

Photovoltage improvements and recombination suppression by montmorillonite addition to PEO gel electrolyte for dye-sensitized solar cells.

Gel Electrolytes Containing Several Kinds of Particles Used in Quasi-Solid-State Dye-Sensitized Solar Cells

High-Performance PVDF-HFP Based Gel Polymer Electrolyte Modified by Core-Shell SiO2-PMMA for Electrochromic Devices

A quasi-solid-state dye-sensitized solar cell based on the stable polymer-grafted nanoparticle composite electrolyte

Improved Quasi-Solid Dye-Sensitized Solar Cells by Composite Ionic Liquid Electrolyte Including Layered Α-Zirconium Phosphate

Efficiency enhancement of dye-sensitized solar cell with PVdF-HFP:MPII:NaI quasi-solid-state electrolyte

Solidifying Liquid Electrolytes with Fluorine Polymer and Silica Nanoparticles for Quasi-Solid Dye-Sensitized Solar Cells

Tio2-P4vp Nanocomposite Electrolyte For Dye-Sensitized Solar Cells

Composite electrolytes with nano-channels for quasi-solid dye-sensitized solar cells

Research on the Dye-sensitized Solar Cells Based on P(VDF-HFP)-type Polymer Gel Electrolyte

In situ Poly(methyl methacrylate)/Graphene Composite Gel Electrolytes for Highly Stable Dye-Sensitized Solar Cells

Photovoltaic and thermal properties of electrolytes based on electrospun poly(vinylidene fluoride-hexafluoro propylene)/poly(methyl methacrylate) nanofibers for dye-sensitized solar cells

An Efficient Dye-Sensitized Solar Cell Using Surfactant-Modified Mesoporous Carbon Film As a Counter Electrode

Gel polymer electrolytes based on polyacrylonitrile and a novel quaternary ammonium salt for dye-sensitized solar cells

High efficiency dye-sensitized nanocrystalline solar cells based on ionic liquid polymer gel electrolyte.

Mg(Oocch3)(2) As An Electrolyte Additive For Quasi-Solid Dye-Sensitized Solar Cells: With The Purpose Of Enhancing Both The Photovoltage And Photocurrent By Modifying The Tio2/Dye/Electrolyte Interfaces

Polyvinylidene fluoride‐co‐hexafluoropropylene polymer gel electrolyte‐enabled dye‐sensitized solar cell for sustainable energy

Improved Stability Quasi-Solid-state Dye-Sensitized Solar Cell Based on Polyether Framework Gel Electrolytes