Abstract:A new constitutive model is proposed for the description of induced anisotropic damage in brittle rocks. The formulation of the model is based on relevant results from the micromechanics consideration. The distribution of microcracks is approximated by a second order damage tensor. The effective elastic properties of damaged material are derived from the free enthalpy function. The evolution of damage is directly related to the growth of microcracks in different space orientations. The volumetric dilatancy due to sliding crack opening is taken into account. The model is extended to the description of creep deformation in brittle rocks. The time dependent deformation is seen as a consequence of the sub-critical propagation of microcracks due to stress corrosion process. The proposed model is applied to a typical brittle rock, the Lac du Bonnet granite. A general good agreement is obtained between numerical simulations and experimental data. Anisotropic damage due to microcracks is an essential mechanism of inelastic deformation and failure in most brittle rocks. Many experimental tests have confirmed various mechanisms of nucleation and growth of microcracks. Under compressive stresses, sliding wing cracks seem to be the principal propagation mode of microcracks (Brace and Bombolakis 1963; Nemat-Nasser and Horii 1982; Wong 1982; Stef 1984; Olsson 1995). Due to roughness of crack surfaces in geomaterials, the crack sliding may induce an associated aperture which is an origin of volumetric dilatancy in these materials (Nemat-Nasser and Obata 1988). When the crack length reaches some critical values, the coalescence of microcracks occurs and localized macro-cracks appear leading to the failure of material. The kinetics of failure is controlled by confining pressure and there is a transition from brittle failure to ductile failure when the confining pressure increases (Fredrich et al. 1989; Horii and Nemat-Nasser 1985, 1986). The main consequences of induced microcracks are: non linear stress-strain relations, deterioration of elastic properties, induced anisotropy, volumetric dilatancy, irreversible strains due to residual crack opening, unilateral response due to crack closure, and hysteresis associated with frictional mechanism. These features have to be considered in the constitutive modelling. Two families of damage models have been developed for the description of induced damage: micromechanical approaches and phenomenological models (we do not give here an exhaustive list of many models reported in the literature). The main advantage of micromechanic al approaches is the ability to account for physical mechanisms involved in the nucleation and growth of microcracks. For the construction of a micromechanical model, two steps are generally performed. The first step consists in the evaluation of the effective elastic properties of material weakened by microcracks. The second step is to propose a suitable damage evolution law for microcrack growth. The main features related to microcrack growth, opening and closure, friction, interaction between cracks, could be taken into account in such micromechanical models. The macroscopic behaviour of material is then obtained through a homogenization procedure. This renders these models difficult to be applied to practical applications. Phenomenological models use internal variables to represent the density and orientation of microcracks, for instance, scalar variable for isotropic damage, second and fourth

Micro-cracks informed damage models for brittle solids

MICRO-CRACK INFORMED MULTI-SCALE DAMAGE MODEL: THEORY AND COMPUTATION

A New Damage Model for Microcrack-Weakened Brittle Solids

Quasi-micromechanical damage model for brittle solids with interacting microcracks

Microcrack interaction brittle rock subjected to uniaxial tensile loads

Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials

5569 - DAMAGE AND CREEP DEFORMATION IN BRITTLE ROCKS

Constitutive relationship of brittle rock subjected to dynamic uniaxial tensile loads with microcrack interaction effects

A new nonlocal macro-meso-scale consistent damage model for crack modeling of quasi-brittle materials

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

Micromechanical Damage Model for Rocks and Concretes Subjected to Coupled Tensile and Shear Stresses

A Three-Dimensional Micromechanics Model for the Damage of Brittle Materials Based on the Growth and Unilateral Effect of Elliptic Microcracks

A subcritical microcrack informed creep-damage model for quasi-brittle materials

Three-Dimensional Micromechanical Model for Quasi-Brittle Solids with Residual Strains under Tension

A micromechanical damage model for rocks and concretes under triaxial compression

An Interacting Wing-Crack Based Semi-Analytical Meso-Scale Model for Describing Elasto-Plastic Damage Behavior of Brittle Rocks

Dynamic Localized Shear Failure Influenced by Changing Rates in Brittle Solids Containing Initial Microcracks

A simplified multiscale damage model for the transversely isotropic shale rocks under tensile loading

An Approximate Scheme for Considering Effects of Microcrack Interaction on the Overall Constitutive Relation of Brittle Solids under Complex Loading

Microscopically based new damage constitutive model with applications*

A Unified Micromechanics-Based Damage Model for Instantaneous and Time-Dependent Behaviors of Brittle Rocks