Abstract:In this paper, we shall present a new micromechanical damage model for capturing the mechanical behaviors of quasi-brittle geomaterials under a wide range of compressive stress. Two essential coupled non-linear mechanisms are taken into account: plastic deformation related to frictional sliding along the microcrack surfaces, and microscopic damage induced by the initiation and propagation of microcracks. Within the framework of thermodynamics and Mori–Tanaka homogenization scheme, free energy and thermodynamic forces, including the local stress applied on the microcracks and damage driving force are deduced. The main novelty of this work lies in presenting a new physically based non-associated and state-dependent friction law to capture the plastic distortion, in which the friction coefficient is no longer a constant but a state-dependent variable varying with the surface asperities of microcracks. The relationship between the friction coefficient and mean local stress, as well as microscopic damage is subtly defined. Intriguingly, a macroscopic strength criterion is derived as an inherent part of the proposed model without rotation of the principal stress. Moreover, semi-analytical stress–strain–damage relationships of the proposed model can be derived under conventional triaxial compression. These up-scaling analyses provide a powerful tool for parameter calibration. For application, the semi-implicit return mapping algorithm with plasticity-damage decoupling correction procedure (SRM-PDDC) is adopted for numerical implementation. To demonstrate the performance of the micromechanical model, we compare the model predictions with experimental data of quasi-brittle rocks in literature as well as the results obtained by Zhu et al. (2016). Finally, the applicable condition of the SRM-PDDC algorithm is discussed in detail.

Micromechanical Damage Model for Rocks and Concretes Subjected to Coupled Tensile and Shear Stresses

Micromechanical damage model for rocks and concrete under tensile and shear loadings

A micromechanical damage model for rocks and concretes under triaxial compression

A Three-Dimensional Micromechanics Model for the Damage of Brittle Materials Based on the Growth and Unilateral Effect of Elliptic Microcracks

A Micromechanics-Based Model for the Effect of Coupled Damage and Pore Pressure in Rock-Like Materials under Triaxial Tension

A Unified Micromechanics-Based Damage Model for Instantaneous and Time-Dependent Behaviors of Brittle Rocks

Damage Based Constitutive Model for Predicting the Performance Degradation of Concrete

Micromechanical Modeling Of Tensile Response Of Elastic-Brittle Materials

Micromechanics-based model study of shear properties of brittle rocks

Three-Dimensional Micromechanical Model for Quasi-Brittle Solids with Residual Strains under Tension

Damage Micromechanics for Constitutive Relations and Failure of Microcracked Quasi-Brittle Materials

Quasi-micromechanical damage model for brittle solids with interacting microcracks

Micromechanical Analysis of Microcrack-Induced Residual Strains in Quasi-Brittle Solids

Micromechanical Model for Simulating the Fracture Process of Rock

Micro-cracks informed damage models for brittle solids

A New Damage Model for Microcrack-Weakened Brittle Solids

MICRO-CRACK INFORMED MULTI-SCALE DAMAGE MODEL: THEORY AND COMPUTATION

A new micromechanical damage model for quasi-brittle geomaterials with non-associated and state-dependent friction law

An Approximate Scheme for Considering Effects of Microcrack Interaction on the Overall Constitutive Relation of Brittle Solids under Complex Loading

A Microplane-Based Anisotropic Damage Model for Deformation and Fracturing of Brittle Rocks

Micromechanical Damage Model for Plain Concrete Considering Propagation of Matrix Microcracks