Abstract:International Journal of Aeroacoustics, Ahead of Print. The accurate prediction of the trailing-edge noise and the determination of its sources are essential to reduce fans and propellers noise. This noise component is due to the scattering of the turbulent boundary layer into acoustic waves by the trailing edge. In this paper, the noise emanating from a CD (Controlled-Diffusion) airfoil is simulated and computed via the hybrid methods of aeroacoustics. In these methods, the aerodynamic and acoustic fields are computed separately. The flow data are obtained using the in-house LES solver SFELES. ACTRAN acoustic solver has been used to solve the acoustics and to provide the near and far fields propagation via Lighthill's analogy. Curle's analogy is applied as well in its integral compact formulation which takes the presence of walls into account. Curle's formulation is applied proposing an approach where the volume and surface integrals have been implemented in SFELES to be calculated simultaneously with the flow in order to avoid the storage of noise sources which requires a huge space. In Lighthill's analogy, sources and near field maps show that the turbulent boundary layer and wake are the more efficient sources and the center of radiation is the trailing edge. The comparison of the numerical results with the experimental measurements, performed by Moreau and Roger and Moreau et al. , shows an overall excellent agreement confirming the capability of SFELES (LES sources) combined with ACTRAN (Lighthill's analogy) to predict correctly the noise generated by turbulent flows around airfoils. The acoustic spectrum presents an overprediction up to 5 dB at the frequencies 300 Hz and 550 Hz and an underprediction about 5 dB at the frequencies 1100 Hz and 1750 Hz. The sound pressure level (SPL) obtained using the proposed approach of Curle's analogy matches very well the experimental results. Thus, Curle's analogy can be used to obtain a fast, approximated and acceptable results about the noise radiation of airfoils avoiding the storage of noise sources which requires a huge space and time.

Noise Prediction for Multi-Element Airfoil Based on FW-H Equation

A New Data Assimilation Method of Recovering Turbulent Mean Flow Field at High Reynolds Numbers

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Aeroacoustic Prediction Based on Large-Eddy Simulation and the Ffowcs Williams–Hawkings Equation

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

Research of the Aeroacoustic Noise Simulation Based on Transition/scale-Adapt Model and FW-H Equation

Far Field Noise Prediction Of Subsonic Hot And Cold Jets Using Large-Eddy Simulation

Aero-Acoustic Calculation of Aircraft High-Lift Device Based on FW-H Equation

Numerical Prediction of Sound Generated from Flows with a Low Mach Number

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

Numerical Analysis of Aerodynamic Noise Radiated from Cross Flow Fan

Large-Eddy Simulation and Aeroacoustic Prediction of Supercritical Airfoil Side-Edge Noise

A Comparison of Acoustic Far-Field Prediction Methods for Turbulent Flows

A novel hybrid method for aerodynamic noise prediction of high-lift devices

Aeroacoustic prediction for cooling fan using convolution quadrature boundary element method

The noise-generating mechanism of rod-airfoil configuration and the effect of spanwise length on noise prediction

Fast prediction of aerodynamic noise induced by the flow around a cylinder based on deep neural network

Fourier Neural Operator with Boundary Conditions for Efficient Prediction of Steady Airfoil Flows

CAA simulations of the leading edge noise of a heaving airfoil

Analysis of Blade Noise with Different Root Boundary Conditions Considering Fluid-Structure Interaction Effect

An Analytical Correction to Amiet’s Solution of Airfoil Leading-Edge Noise in Non-Uniform Mean Flows