Abstract:An attempt is made in this study to research the performance of prestressed concrete pipe piles based on 10,333 pile tests. Short and medium-length piles with slenderness ratios ranging from 10 to 90 are most widely used, and the optimal length is between the range of 10~50 m. For the same bearing stratum and diameter, the capacity of pile increases with increasing pile length until a limiting value is achieved. The average pile-top settlement is approximately in the range of 10 ~ 25 mm, and the rebound rates for piles with various lengths are similar. The results show that the diameter of Φ400 and Φ500 is most widely used, accounting for 33.8% and 46.1%, respectively, and the optimal length is between the range of 10 ~ 50 m. Under conditions of, when the bearing stratum is clay, the bearing capacity of pipe piles increases with an increase in length to diameter ratio; when sandy soil, the bearing capacity firstly increases and then decreases; when with the same length to diameter ratio, the bearing capacity increases in both cases, and the latter is higher than the former. There is a large discreteness in settlement of pile top, and the average value is normally about 10 ~ 25 mm, without significant relationship with the bearing stratum. The results of statistical research will be a reliable reference for pipe pile research, design and construction in soft soil area. The results are expected to improve the understanding of prestressed concrete pipe piles and facilitate the design process.

Current Use of Prestressed Concrete Pipe Piles Founded in Silty Geomaterials

Statistical research on performance of prestressed concrete pipe piles

A New and Openly Accessible Database of Tests on Piles Driven in Sands

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

The engineering characteristic of precast tubular pile and mixing cement pile composite foundation for deep soft ground

Behavior of Sand Filled Nodular Piles under Compression in Soft Soil Areas

Statistical analysis of pipe pile behavior in soft soil

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles

FEM Analysis and Design of Long Short Pile Composite Foundation

Experimental Study Of The Rigid-Flexible Pile Composite Foundation

Laboratory tests on the frictional capacity of core pile - cemented soil interface

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Influence of Soil Reinforcement on the Uplift Bearing Capacity of a Pre-Stressed High-Strength Concrete Pile Embedded in Clayey Soil

Field Tests on Behavior of Pre-Bored Grouted Planted Pile and Bored Pile Embedded in Deep Soft Clay

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Field Tests on Behavior of Pre bored Grouted Planted Pile in Soft Soil Area with Existing Pile Foundation