Abstract:Dendrite growth velocity as a function of initial bulk undercooling was systematically studied in situ using high speed thermal imaging of highly undercooled Ni90Cu10 and Ni95Cu5 single phase alloy melts. For these two non-dilute concentrated alloys, the dendrite growth velocity first increased continuously at small and mediate undercooling regimes and then discontinuously to a maximum value at the high undercooling range. A clear plateau appeared in the growth velocity-undercooling curve revealed a gradual transition from mainly solute-controlled growth to mainly thermal-controlled growth, which was very similar to the solidification characteristics of a dilute alloy. The discontinuity appeared in the growth velocity-undercooling relationship was suggested to be induced by the finite solute diffusion speed in the bulk melt ahead of the advancing solid-liquid interface. Microstructure, substructure and microtexture of the two undercooled alloys were characterized using EBSD technique, and the fundamental mechanism behind “spontaneous grain refinement” is elucidated. The microstructure evolution indicated two kinds of grain refinements: one was dendrite remelting induced grain refinement and the other was recrystallization induced grain refinement. It was found that the texture of the as-solidified microstructure was getting more and more random as the initial bulk undercooling increased, which was due to the increased stress and recrystallization in the as-solidified microstructure. New evidence of grain refinement was found in the as-solidified samples. We found that the samples undercooled beyond the critical undercooling had a grain refined microstructure and that this corresponded with a clear discontinuity in the dendrite growth velocity-undercooling curve. Microstructural data suggested that in Ni-Cu alloys grain refinement at a high undercooling was a consequence of a recrystallization process, which contrasted with conventional grain refined alloys where grain refinement appeared to be the result of remelting-induced dendritic fragmentation.

In Situ Observation of Columnar-to-equiaxed Transition in Directional Solidification Using Synchrotron X-radiation Imaging Technique

Study of Columnar-Equiaxed Transition and Anaxial Columnar Dendrites Growth of Hypoeutectic Alloy with Synchrotron Radiation

In Situ Study on Columnar-Equiaxed Transition and Anaxial Columnar Dendrite Growth of Al-15%Cu Alloy by Synchrotron Radiography

In Situ and Real-Time Observation of the Solidification Process of Al-20 Mass%Cu Alloy by Synchrotron X-Ray Radiography

Microstructure Formation and Columnar to Equiaxed Transition During Cold Crucible Directional Solidification of a High-Nb TiAl Alloy

Observation of Dendrite Growth Velocity and Microstructure Transition in Highly Undercooled Single Phase Alloys

Study of fragment behavior during columnar-equiaxed transition of hypoeutectic alloy with synchrotron radiation

Simulation of the Columnar-to-Equiaxed Transition in Alloy Solidification - the Effect of Nucleation Undercooling, Density of Nuclei in Bulk Liquid and Alloy Solidification Range on the Transition

Dendritic Growth and Solute Trapping in Rapidly Solidified Cu-based Alloys

Numerical Simulation of Columnar to Equiaxial Transition During Solidification of Ti-44at% Al Alloy

Intermittent nucleation and periodic growth of grains under thermo-solutal convection during directional solidification of Al-Cu alloy

Containerless Rapid Solidification of Undercooled Cu-Co Peritectic Alloys

Numerical Simulation of Columnar to Equiaxed Transition for Directionally Solidified Ti-44Al Alloy

Numerical Simulation of Solute Undercooling Influenced Columnar to Equiaxed Transition of Fe-C Alloy with Cellular Automaton

The Effect of Low Cooling Rates on Dendrite Morphology During Directional Solidification in Mg–Gd Alloys: in Situ X-ray Radiographic Observation

Anaxial Columnar Dendrites in Directional Solidification of an Al–15wt.% Cu Alloy

Experimental Observation of Solidification of Undercooled Single Phase Alloys

The solidification path related columnar-to-equiaxed transition in Ti–Al alloys

Simulation of Columnar-to-equiaxed Transition in Solidified Al–Cu Alloy Ingots by Stochastic Model

Equiaxed dendritic growth in nearly isothermal conditions: A study combining in situ and real-time experiment with large-scale phase-field simulation

Effect of Thermal Convection on Columnar-to-equiaxed Transition During Solidification of Al-Cu Alloy