Abstract:The major barriers for applying carbon dioxide (CO2) capture technology to coal-fired power plants in China and worldwide are the consequent drop in power plant energy efficiency and significantly higher cost of electricity (COE). This paper proposes a new perspective for determining the most cost-efficient CO2 capture ratio using a modeling and simulation approach that balances the per unit parasitic energy consumption for absorbent regeneration with the per unit capital cost of the CO2 capture unit of a coal-fired power plant. Using a typical 550 MW supercritical pulverized coal-fired power plant in China as the reference plant, with monoethanolamine (MEA) absorption unit for CO2 capture, a process model of the power generation unit together with the MEA CO2 capture unit was developed and detailed process simulations were conducted with the model. Then, a sensitivity analysis was then conducted to study the impact on key plant behavior indicators, including per unit energy penalty for absorbent regeneration, net power output and power generation efficiency, total capital cost of the power plant together with the MEA CO2 absorption unit, per unit capital cost of the MEA unit, COE, as well as the per unit CO2 avoidance cost (indicated by cost per tonne (t) CO2 avoided), across a CO2 capture ratio range between 20% and 99%. The results show that when CO2 capture ratio is low, while the unit energy consumption for absorbent regeneration per tCO2 avoided increases steadily with the increase of CO2 capture ratio, the cost per tCO2 avoided decreases as the MEA absorption train is scaled up given the high capital cost of each MEA train. After CO2 capture ratio reaches certain level (60% for this plant), the cost per tCO2 avoided starts to increase with CO2 capture ratio, since the unit energy consum- - ption for absorbent regeneration per tCO2 avoided has increased to so high that it supplants the scaling effect of the MEA train and becomes the dominant factor that determines the increase or decrease trend of the cost per tCO2 avoided. Besides, due to the physical restraint on the upper bound of CO2 capture capability of one single MEA train by the diameter of the absorber, an additional MEA train is needed when the CO2 capture ratio increases to certain points (40% and 85% for this plant), resulting in jumps of several parameters including the total capital cost for the power plant and MEA CO2 capture unit, per unit capital cost for the MEA CO2 capture unit, and last the cost per tCO2 avoided. Based on all these result, finally a cost-optimal CO2 capture ratio of 40% (365 RMB/tCO2-_avoided) was obtained, which is easier for the power plant to bear while realizing a significant reduction in CO2 emission of this plant. Therefore, applying this approach for determining CO2 capture ratios could help minimize the barrier for the initiation of carbon dioxide capture and storage (CCS) in China's power industry. Besides, future replacement or improvement for the MEA CO2 capture technology has the potential to further reduce the cost per tCO2 avoided, which needs special attention.

Technoeconomic Assessment of China’s Indirect Coal Liquefaction Projects with Different CO2 Capture Alternatives

Comparative Investigation of Different CO2 Capture Technologies for Coal to Ethylene Glycol Process

Economic Analysis of CO2 Separation from Coal-Fired Flue Gas by Chemical Absorption and Membrane Absorption Technologies in China

A life cycle analysis comparing coal liquefaction techniques: A health-based assessment in China

How policy choice affects investment in low-carbon technology: The case of CO2 capture in indirect coal liquefaction in China

Cost analysis of indirect coal-to-liquids (ICL) applying CO_2 capture (CC) under uncertainty of oil price

Learning Rates and Cost Reduction Potential of Indirect Coal-to-liquid Technology Coupled with CO2 Capture

Techno-economic Analysis of CO2 Capture Using Dimethyl Carbonate

Techno-economic Analysis of Carbon Capture and Utilization Technologies and Implications for China

Reducing initial barriers for CCS deployment on pulverized coal-fired power plants in China by optimizing the capture ratio of carbon dioxide

Techno-economic analysis and comparison of coal-based chemical technologies with consideration of water resources scarcity

Simulation and Economic Analysis of Indirect Coal-to-Liquid Technology Coupling Carbon Capture and Storage

Exergy and Economic Analyses of Indirect Coal-to-liquid Technology Coupling Carbon Capture and Storage

The experience in the research and design of a 2 million tons/year flue gas CO2 capture project for coal-fired power plants

Near-term mega-scale CO2 capture and storage demonstration opportunities in China

Assessing the Economics of CO2 Capture in China's Steel Plant

Techno-Economic Assessment for CO2 Capture From Air Using a Conventional Liquid-Based Absorption Process

The economics of clean coal power generation with carbon capture and storage technology in China

Economic Evaluation of an Igcc Cogeneration Power Plant with Ccs for Application in China

Life cycle energy-economy-environmental evaluation of coal-based CLC power plant vs. IGCC, USC and oxy-combustion power plants with/without CO2 capture

Engineering Design and Economic Analysis of CO2 Sequestration from Flue Gas by Using Membrane Absorption Techniques