Abstract:The major barriers for applying carbon dioxide (CO2) capture technology to coal-fired power plants in China and worldwide are the consequent drop in power plant energy efficiency and significantly higher cost of electricity (COE). This paper proposes a new perspective for determining the most cost-efficient CO2 capture ratio using a modeling and simulation approach that balances the per unit parasitic energy consumption for absorbent regeneration with the per unit capital cost of the CO2 capture unit of a coal-fired power plant. Using a typical 550 MW supercritical pulverized coal-fired power plant in China as the reference plant, with monoethanolamine (MEA) absorption unit for CO2 capture, a process model of the power generation unit together with the MEA CO2 capture unit was developed and detailed process simulations were conducted with the model. Then, a sensitivity analysis was then conducted to study the impact on key plant behavior indicators, including per unit energy penalty for absorbent regeneration, net power output and power generation efficiency, total capital cost of the power plant together with the MEA CO2 absorption unit, per unit capital cost of the MEA unit, COE, as well as the per unit CO2 avoidance cost (indicated by cost per tonne (t) CO2 avoided), across a CO2 capture ratio range between 20% and 99%. The results show that when CO2 capture ratio is low, while the unit energy consumption for absorbent regeneration per tCO2 avoided increases steadily with the increase of CO2 capture ratio, the cost per tCO2 avoided decreases as the MEA absorption train is scaled up given the high capital cost of each MEA train. After CO2 capture ratio reaches certain level (60% for this plant), the cost per tCO2 avoided starts to increase with CO2 capture ratio, since the unit energy consum- - ption for absorbent regeneration per tCO2 avoided has increased to so high that it supplants the scaling effect of the MEA train and becomes the dominant factor that determines the increase or decrease trend of the cost per tCO2 avoided. Besides, due to the physical restraint on the upper bound of CO2 capture capability of one single MEA train by the diameter of the absorber, an additional MEA train is needed when the CO2 capture ratio increases to certain points (40% and 85% for this plant), resulting in jumps of several parameters including the total capital cost for the power plant and MEA CO2 capture unit, per unit capital cost for the MEA CO2 capture unit, and last the cost per tCO2 avoided. Based on all these result, finally a cost-optimal CO2 capture ratio of 40% (365 RMB/tCO2-_avoided) was obtained, which is easier for the power plant to bear while realizing a significant reduction in CO2 emission of this plant. Therefore, applying this approach for determining CO2 capture ratios could help minimize the barrier for the initiation of carbon dioxide capture and storage (CCS) in China's power industry. Besides, future replacement or improvement for the MEA CO2 capture technology has the potential to further reduce the cost per tCO2 avoided, which needs special attention.

Techno-economic Analysis of Carbon Capture and Utilization Technologies and Implications for China

Analyzing the current state and future development of carbon capture, utilization and storage (CCUS) strategies and technologies in China

Dynamic optimization of carbon capture technology deployment targeting carbon neutrality, cost efficiency and water stress: Evidence from China's electric power sector

Water-CCUS nexus: challenges and opportunities of China’s coal chemical industry

Reducing initial barriers for CCS deployment on pulverized coal-fired power plants in China by optimizing the capture ratio of carbon dioxide

Techno-economic Analysis of Integrated Carbon Capture and Utilisation Compared with Carbon Capture and Utilisation with Syngas Production

Optimal deployment for carbon capture enables more than half of China’s coal-fired power plant to achieve low-carbon transformation

Worldwide Status of CCUS Technologies and Their Development and Challenges in China

Emission reduction path for coal-based enterprises via carbon capture, geological utilization, and storage: China energy group

Progress and prospects of carbon dioxide capture, EOR-utilization and storage industrialization

An Optimization Model for Carbon Capture Utilization and Storage Supply Chain: A Case Study in Northeastern China

The economics of clean coal power generation with carbon capture and storage technology in China

The integration of hydrogenation and carbon capture utilisation and storage technology: A potential low‐carbon approach to chemical synthesis in China

Optimization-based approach for CO2 utilization in carbon capture, utilization and storage supply chain

[Assessment of Emission Reduction Potential of CO2 Capture, Geological Utilization, and Storage in Cement Industry of China]

The Carbon-Energy-water Nexus of the Carbon Capture, Utilization, and Storage Technology Deployment Schemes: A Case Study in China's Cement Industry

Economic Analysis of CO2 Separation from Coal-Fired Flue Gas by Chemical Absorption and Membrane Absorption Technologies in China

[Carbon Capture and Storage (CCS) and Its Potential Role to Mitigate Carbon Emission in China].

Carbon Circular Utilization and Partially Geological Sequestration: Potentialities, Challenges, and Trends

Comprehensive technology and economic evaluation based on the promotion of large-scale carbon capture and storage demonstration projects

Techno-economic Evaluation of CO2 Capture and Storage Retrofit in Decarbonizing Different Thermal Power Plants: A Case Study in China