Analytical Modeling of Induced Current for DC Pulse Water Processor System and Optimizing of Excitation Coil

HAN Yong,ZHAO Yong-ping,CHAI Xin,LIU Xiao-long

DOI: https://doi.org/10.3969/j.issn.1007-449x.2011.09.006

2011-01-01

Abstract:In order to do a quantitative study of the anti-fouling mechanism to the DC pulse water processor(DC PWP) system,an evaluation method of anti-fouling effect based on modeling of weak induced current was put forward.Firstly,an analytical model of induced current in aqueous solution,which can decide the anti-fouling effect directly,was built.Then,it was put forward that the intensity of the DC PWP system acting on the hard water can be measured by the average power of the induced current in the solution,and the method of the optimizing of excitation coil was got based on the functional relationship between the average power of the induced current and the size parameters of the coil.At last,the analytical expression of the induced current was proved correct by using 2D finite element method to calculate the induced current in a practical model,the calculated results and the results obtained by the analytical expression of the induced current can tally well.The average relative error is 3.58%.The result of the optimizing of excitation coil indicates that the shorter the coil radius is and the less the coil turns are,then the average power is bigger on a specific constraint condition,especially,on the condition that the coil radius is confirmed,the max value of the average power can be got when the length of the coil equals to the diameter of the coil.When coil radius is 0.01,0.03,0.05 m,coil turns are 20,30,50,then the max value of the average power is 6×10-6,3×10-7,6×10-8 W.