Abstract:The Helium Cooled Ceramic Breeder (HCCB) blanket is the critical component of the China Fusion Engineering Test Reactor (CFETR). The radial structural layout of the internal functional zones has the largest impact on the neutronics and thermal-hydraulic performance of the blanket, and it's also the major determinant for the detailed 3D design. In the previous work, NTCOC, a Neutronics/Thermal-hydraulic Coupling Optimization Code, has been developed for application in the radial structural layout optimization of the CFETR HCCB blanket. However, for increasing the optimization efficiency, the NTCOC employs the simplified 1D neutronics and 2D thermal hydraulic calculation models, the results of which may differ from the calculation results of the 3D actual models. Therefore, it's essential to verify the reliability of the simplified models by comparing their calculation results with the corresponding 3D models. In this work, both the 3D neutronics and thermal-hydraulic analyses corresponding to the radial structural optimization processes of the CFETR HCCB blanket are performed and the corresponding calculation results are compared with NTCOC. The results show that adopting the 1D neutronics model in NTCOC can reflect the change tendency of the tritium breeding performance during the radial optimization processes accurately. However, the radial temperature distribution which is calculated by the 3D thermal-hydraulic model is generally higher than the NTCOC results, which means that the direct application of the 2D thermal-hydraulic model in NTCOC is not conservative. For solving this problem, a 3D thermal revision is added to the previous optimization method in the form of feedback. After revision, the 3D calculated temperature of the newly obtained blanket scheme is generally lower than the NTCOC's, which means that the previous problem has been well solved. This work comprehensively verifies the reliability of the NTCOC and the improved optimization method after the 3D thermal revision for application in the radial structural optimization of the CFETR HCCB blanket.

Influence Research on Energy Deposition in TFC of CN HCCB TBM for ITER

Technical Issues for the Fabrication of A Cn-Hccb-Tbm Based on Rafm Steel Clf-1

Current Progress of Chinese HCCB TBM Program

Vacuum Hot-Pressed Beryllium and Tic Dispersion Strengthened Tungsten Alloy Developments for Iter and Future Fusion Reactors

Neutronic Calculation Analysis for CN HCCB TBM-Set

Neutronics design and optimization for ITER helium cooled ceramic breeder test blanket module

3-D Neutronics Calculation of the 2×6 HCSB TBM Model

Electromagnetic Safety Analysis on Chinese ITER HCSB-TBM Design

Finite element analysis on plasma-driven transport of tritium in FW of WCCB for CFETR

Analysis of nuclear response in CFETR toroidal field coils with density reduction VR technique

1-D neutronics optimization design for ITER CH HCSB TBM

Evaluation of Implantation-Driven Tritium Transport in the First Wall of the WCCB Blanket for CFETR

Ripple effect and impact of test blanket module by using RAFM steels on the plasma of ITER

Tritium Transport Modeling and Analysis for HCCB Blanket of CFETR

Investigation on the Tritium Self-Sufficiency and Neutron Shielding Based on a Water-Cooled Blanket for CFETR at 1.5 GW

Three-dimensional Validation and Analyses of the Optimized CFETR HCCB Blanket

Activation Calculation and Analysis for Chinese ITER Solid Test Blanket Module

Preliminary Shielding Analysis for HCCB TBM Transport

Electromagnetic Coupling Evaluations on ITER Chinese TBM under Plasma Major Disruptions

Numerical simulation on thermal hydraulics characteristics of breeder pebble bed for China HCCB-TBM

A Study on Nuclear Analysis of the Divertor Region of the CFETR