Abstract:Dynamic locomotion plays a crucial role for legged robots to fulfill tasks in unstructured environments. This paper proposes whole-body kinematic and dynamic modeling method s based on screw theory for a quadruped robot using different gaits and mechanism topologies. Unlike simplified models such as centroid or inverse pendulum models, the methods proposed here can handle 10-dimensional mass and inertia for each part. The only simplification is that foot contact models are treated as spherical joints. Models of three different mechanism topologies are formulated: (1) Standing phase: a system consisting of one end-effector, the body, and four limbs, the legs; (2) Walking phase: a system consisting of one or two lifting legs (depending on the chosen gait), two or three supporting legs; (3) Floating phase: a system in which all legs detach from the ground. Control strategies based on our models are also introduced, which includes walk and trot gait plans. In our control system, two additional types of information are provided: (1) contacting forces are given by force sensors installed under feet; (2) body poses are determined by an inertial measurement unit (IMU). Combined with the sensor data and calibrated mass, inertia, and friction, the joint torque can be estimated accurately in simulation and experiment. Our prototype, the “XiLing” robot, is built to verify the methods proposed in this paper, and the results show that the models can be solved quickly and leads to steady locomotions.

A spring-mass model with a torso

Passive Dynamic Walking With A Torso Coupled Via Torsional Springs

High efficient walking of compass-like biped robots with foot rotation

Passive dynamic walking with torso

Biped Robot Walking Using Three-Mass Linear Inverted Pendulum Model

Robot Simulations Based on Bipedal Spring-Mass Model With Variable Slack Length and Stiffness.

A passive walking strategy for a biped robot with a large mass torso by a spring and a damper

Leg Configuration Analysis and Prototype Design of Biped Robot Based on Spring Mass Model

Torso Swaying and Walking of a Biped Robot

Robust walking control of a planar spring mass biped robot

Passive Dynamic Walking of a Biped Robot with Torso and Its Stabilizer

Whole-body kinematic and dynamic modeling for quadruped robot under different gaits and mechanism topologies

Biped Walking on Level Ground with Torso Using Only One Actuator.

Modeling and Simulation of Musculoskeletal System of Human Lower Limb Based on Tensegrity Structure

Walking Control of a Variable Stiffness Biped Robot with a Swing Torso

An Actuated Dissipative Spring-Mass Walking Model: Predicting Human-Like Ground Reaction Forces and the Effects of Model Parameters.

Stable walking control and strategy of under-actuated biped robot

Design and Analysis of the Leg Configuration for Biped Robots’ Spring-like Walking

Biped Walking Based on Stiffness Optimization and Hierarchical Quadratic Programming

Design and sequential jumping experimental validation of a musculoskeletal bipedal robot based on the spring-loaded inverted pendulum model

Semi-passive Walking Control of Biped Robot with Muscle Model