Abstract:The development of microfluidic flow injection analysis (FIA) system for simultaneous and real-time detection of multiple metal ions is of great importance for environmental monitoring, food safety and industrial field. In this work, a multiplexed microfluidic chip based FIA system was fabricated for simultaneous determination of three metal ions, by using Fe(III), Mn(II) and Cu(II) as models. The multiplexed microfluidic chip based FIA system is composed of three parts, including a multi-channel FIA system for solution manipulation, a group of microfluidic chips for reagents mixing and reaction, and one fiber optic spectrometer for fast and real-time absorbance signal detection. The sample solution and chromogenic reagents were injected into the microfluidic chips to carry out specific colorimetric reactions. Fe(III), Mn(II) and Cu(II) reacts with 5-sulfosalicylic acid, formaldoxime, and bis(cyclohexanone) oxalyldihydrazone, respectively, to generate orange, ember and blue colored solution with peak absorbance at 420 nm, 450 nm, and 600 nm, respectively. The absorbance signal of the generated three channels of solution can be sequentially detected by using only one mini spectrometer. The linear detection range for Fe(III), Mn(II) and Cu(II) is 0.1–20 mg/L, 0.1–12 mg/L and 0.2–12 mg/L, respectively. The limit of detection for Fe(III), Mn(II) and Cu(II) is 0.07, 0.02 and 0.1 mg/L respectively. And the limit of quantification for Fe(III), Mn(II) and Cu(II) is 0.2, 0.07 and 0.3 mg/L, respectively. The recoveries of spiked Fe (III), Mn (II), and Cu (II) in real water samples are between 95.3 % to 106 %. Finally, the developed microfluidic chip based FIA system was successfully applied to simultaneous determination of three metal ions in environmental water samples and zinc smelting solution from zinc hydrometallurgy industry with satisfied results.

Flow injection-spectrophotometry analysis of manganese in seawater samples

A Catalytic Spectrophotometric Method for Determination of Nanomolar Manganese in Seawater Using Reverse Flow Injection Analysis and a Long Path Length Liquid Waveguide Capillary Cell.

In-field Determination of Trace Dissolved Manganese in Estuarine and Coastal Waters with Automatic On-Line Preconcentration and Flame Atomic Fluorescence Spectrometry.

Development and Application of a Shipboard Method for Spectrophotometric Determination of Trace Dissolved Manganese in Estuarine and Coastal Waters

Flow Injection Analysis Method with On-Line Resin Separation for Determining Trace Fe(II) and Fe(II + III) Using Catalytic Spectrophotometry

Determination of Trace Amounts of Manganese in Natural Waters by Flow Injection Stopped-Flow Catalytic Kinetic Spectrophotometry

Reverse Flow Injection Analysis Method for Catalytic Spectrophotometric Determination of Iron in Estuarine and Coastal Waters: A Comparison with Normal Flow Injection Analysis

Simultaneous Determination of Nanomolar Nitrite and Nitrate in Seawater Using Reverse Flow Injection Analysis Coupled with a Long Path Length Liquid Waveguide Capillary Cell.

Flow injection on-line cloud point extraction without a chelating reagent for the determination of trace metals in seawater by inductively coupled plasma optical emission spectrometry

Flow injection on-line preconcentration and flame atomic absorption spectrometric determination of iron, cobalt, nickel, manganese and zinc in sea-water

Improved method for shipboard determination of iron in seawater by flow injection analysis

Development of a Sequential Injection Analysis Device and Its Application for the Determination of Mn(II) in Water.

Determination of copper complexation in seawater using flow injection analysis with chemiluminescence detection

Impact of environmental factors on in situ determination of iron in seawater by flow injection analysis

Flow-Injection Analysis (FIA) Electrochemical Speciation of Copper in Coastal Waters by Anodic Stripping Voltammetry (ASV)

Continuous Flow Analysis Combined with a Light-Absorption Ratio Variation Approach for Determination of Copper at ng/ml Level in Natural Water

Multiplexed Microfluidic Chip Based Flow Injection Analysis System for Simultaneous Determination of Fe(Iii), Mn(Ii) and Cu(Ii)

Determination of Sulfite in Water Samples by Flow Injection Analysis with Fluorescence Detection

Application of light-absorption ratio variation approach as an optimum spectrophotometry to determination of Mn(II) in ng ml−1 level using a competitive replacement complexation

Determination of Mn2+ in seawater used an in situ shipborne detection device coupled with the glassy carbon electrode

Toward a Versatile Flow Technique: Development and Application of Reverse Flow Dual-Injection Analysis (rfdia) for Determining Dissolved Iron Redox Species and Soluble Reactive Phosphorus in Seawater.