Abstract:The direct synthesis of light olefins from syngas via Fischer-Tropsch synthesis reaction is a promising technology for direct synthesis of olefins from syngas. The key is to improve the selectivity of light olefins through the regulation of product distribution. In this work, the hydrophobic Fe@Si catalyst was prepared by room temperature solid state methodStober-silylation method, and then the catalyst was combined with SAPO-34 molecular sieves with different contents to prepare Fe@Si/S-34 composite catalysts. The effects of SAPO-34 molecular sieve content on the physicochemical properties of the catalysts were investigated by X-ray diffraction, scanning electron microscopy, N-2 adsorption-desorption, NH3 temperature programmed desorption and water contact angle measurement. The results showed that the content of SAPO-34 molecular sieve has significant influence on the surface area, pore volume, acidity and hydrophobicity of the catalysts. With the increase of SAPO-34 molecular sieve content, the specific surface area and total pore volume of the catalyst increased, the weak acid and medium-strong acid sites increased, and the hydrophobicity weakened. The catalytic performance evaluation results showed that the Fe@Si/S-34 composite catalyst decomposed C5+ hydrocarbons into light hydrocarbons, significantly reduced the selectivity of C5+ products and increased the selectivity of C2 similar to C4 hydrocarbons. Appropriate SAPO-34 molecular sieve could significantly improve the selectivity of C2 similar to C-4 olefins. When the mass ratio of Fe@Si catalyst to SAPO-34 is 2, the C-2 similar to C-4 olefin selectivity of Fe@Si/S-34 catalyst is the highest, the conversion of CO is 80.0%, the selectivity of CO2 in the product is 8.9%, and the selectivity of C-2 similar to C-4 olefins is 31.1%. In this study, the hydrophobicity of Fe@Si catalyst and the cracking activity of SAPO-34 molecular sieve for C5+ hydrocarbon were coupled together to inhibit the water-gas shift (WGS) reaction, reduce the CO2 selectivity and obtain higher C-2 similar to C-4 olefin selectivity, which provided a new strategy for the development of catalysts for Fischer-Tropsch synthesis to olefins.

Study of Catalytic Hydrocracking of Asphaltenes from Heavy Products of Coal Liquefaction

Preparation of Fe@Si/S-34 Catalysts and Its Catalytic Performance for Syngas to Olefins

Study on the Effect of Catalyst Properties on Residue Hydroconversion

Synthesis of Surfactant Used in Heavy Oil Catalytic Cracking

Hydrocracking of Bio-Alkanes over Pt/Al-MCM-41 Mesoporous Molecular Sieves for Bio-Jet Fuel Production

Study on Sulfur Conversion Characteristics in Catalytic Cracking of Coal Tar in the Presence of Dolomite-Supported Catalysts

Catalytic asphaltene upgrading under methane environment: Solvent effect and its interaction with oil components

Effect of Methanol on Catalytic Performance of Hy Zeolite for Desulfurization of Fcc Gasoline by Alkylation

Effect of La-Fe/Si-MCM-41 Catalysts and CaO Additive on Catalytic Cracking of Soybean Oil for Biofuel with Low Aromatics

Effect of temperature on catalytic hydrocracking of Xiaolongtan lignite over a mesoporous silica-coated Fe3O4 supported magnetic solid base for producing aromatics

Study on Modification and Sulfur-Resistance Characteristics of Dolomite Catalysts over Wash Oil Catalytic Cracking

Liquefaction of Hongliulin coal asphaltenes and conversion of oxygenic structure

Catalytic reforming of lignite pyrolysis volatiles over sulfated HZSM-5: Significance of the introduced extra-framework Al species

EFFECT OF COAL-SWELLING AND SYNCHRONOUSLY SUPPORTED CATALYSTS ON COPROCESSING OF BITUMINOUS COAL AND HEAVY OILS

Synergetic Regulation of the Microstructure and Acidity of HZSM-5/MCM-41 for Efficient Catalytic Cracking of n-Decane

Effect of Catalyst Properties on Hydrocracking of Pyrolytic Lignin to Liquid Fuel in Supercritical Ethanol

Investigation on asphaltene compositions and structures during hydroprocessing of low-temperature coal tar at different reaction temperatures on Ni–Mo–W/γ–Al2O3 catalysts

IMPACT OF ADDITIONAL CATALYSTS ON NITROGEN DISTRIBUTION IN RESIDUE OIL SLURRY-BED HYDROCRACKING

Hydrocracking of vacuum residue in a slurry phase reactor: effect of reaction temperature and properties of feedstock

Effect of slurry phase catalyst and H2 pressure on hydrocracking of SDA (solvent de-asphalting) pitch

Synergism Between Hydrogen Donors and Dispersed Catalysts in Hydrocracking of Residue