Abstract:Additive manufacturing (AM) by electron beam melting (EBM) has many advantages over the laser-based AM techniques, but is subjected to a lower cooling rate and a long time thermal exposure with a much higher temperature. Therefore, the EBMed aluminum alloys commonly have coarser solidification structures such that lower mechanical properties compared to their SLMed counterparts. In this work, we proposed a strategy of introducing TiB2 particles into heat-resistant Al-Cu-Mg-Fe-Ni alloy to enhance the grain refinement and heat resistance for EBM fabrication. Applying a “presintering-densification” scanning strategy, near fully dense samples were build up with precise contours and good surface quality. The as-built EBMed TiB2/Al-Cu-Mg-Fe-Ni composite possessed a highly homogeneous microstructure with uniformly distributed TiB2 and Fe/Ni rich intermetallic particles. A fully equiaxed grain structure was achieved in the composite with a profoundly refined grain size of ~9 µm. The improved grain refinement effect was attributed to the sufficient activation of TiB2 particles as heterogeneous nuclei under a high cooling rate. Additionally, the solidified microstructure has shown an excellent thermal stability under ~500 °C during EBM process. The coexistence of thermal stable TiB2 and Fe, Ni-rich intermetallics at grain boundaries restricted the grain growth effectively. The as-built composite exhibited a high tensile strength of 253.4 MPa with an outstanding elongation of 13.5 %. After a T6-like heat treatment, the tensile strength was increased to 322 MPa with an elongation of 9.8 %. This study might shed a new light on designing high performance aluminum alloys/composites suitable for EBM technique.

Mechanical properties and wear resistance of aluminum composite welded by electron beam

Research on Electron Beam Welding of in Situ TiB 2p /ZL101 Composite

Microstructure evolution and strengthening mechanism of electron beam welded TiBw/Ti6Al4V composite joint

Microstructure and Mechanical Properties of Electron Beam Freeform Fabricated TiB2/Al-Cu Composite

Laser Welding of In-Situ Particulate Reinforced Aluminum Matrix Composites

Research on weldability of ZL101/TiB2 MMCs by laser-TIG hybrid welding

Interfacial Microstructure and Strength of the Dissimilar Joint Ti3Al/TC4 Welded by the Electron Beam Process

Electron Beam Welding of Sicp/Al Composite to Ti-6al-4v

Microstructure and mechanical properties of SiCp/Al joints by electron beam welding

Microstructure and mechanical properties of electron beam welding of AlCoCrFeNi 2.1 eutectic high entropy alloy

Enhancement of Grain Refinement and Heat Resistance in TiB2-reinforced Al-Cu-Mg-Fe-Ni Matrix Composite Additive Manufactured by Electron Beam Melting

Microstructure and Mechanical Properties of Electron Beam Welded Joints of Ti 2 AlNb Alloy

Beam Scanning Effect on Properties Optimization of Thick-Plate 2A12 Aluminum Alloy Electron-Beam Welding Joints

Electron Beam Welding of New Pattern Tial Intermetallic Light Alloy

Optimizing microstructure and mechanical properties of Ti-5Al-2Sn-2Zr-4Mo-4Cr alloy electron beam welded joint through post-weld heat treatment

Crack formation and control upon the electron beam welding of TiAl-based alloys

Mechanical properties and microstructure analysis of welding-brazing of Al/ti butt joint with Zn foil additive

Brazing ZrO2 Ceramic and TC4 Alloy by Novel WB Reinforced Ag-Cu Composite Filler: Microstructure and Properties

Micro-mechanical properties and associated strengthening mechanism of Be-Al-Ag-Si alloys fabricated by electron beam welding technique

Electron beam welding of SiCp/2024 and 2219 aluminum alloy

Microstructural features and mechanical properties of in-situ remelting welding of TC4 titanium alloy and T2 copper welded joint by electron beam