Structure and mechanical properties of aluminum alloy/Ag interlayer/steel non-centered electron beam welded joints

ZHANG Bing-gang,CHEN Guo-qing,ZHANG Chun-guang,NI Jia-qiang

DOI: https://doi.org/10.1016/S1003-6326(11)61096-0

IF: 3.752

2011-01-01

Transactions of Nonferrous Metals Society of China

Abstract:Electron beam welding was carried out between aluminum alloy and steel with Ag interlayer. Seam morphology, structure and mechanical properties of the joints were investigated with different action positions of the electron beam spot. The results show that with the increment of the beam offset to the silver side from the interface between silver and steel, the seam morphology was improved, and the porosity in the Ag interlayer vanished. A transition layer mainly composed of Ag2Al and Al eutectic was formed at the interface between silver and aluminum, and became thin and spiccato as the beam offset increased. When the beam offset was too large, two IMC layers composed of FeAl and FeAl3 respectively were formed at the interface between steel and Ag interlayer. The optimal beam offset was 0.2 mm, and the maximum tensile strength of the joint was 193 MPa, 88.9% that of the aluminum alloy, and the fracture occurred at the interface between steel and Ag interlayer.