Abstract:During the tensioning process of the cable-supported structure, the sliding friction between cable wires and joint will have a great influence on the mechanical properties of the structure. However, due to the complex structure of the cable and the combined action of bending deformation and large pre-tension at the cable-strut joint, it is difficult to accurately determine the coefficient of sliding friction (CSF) between cable wires and joint, and thus the overall mechanical properties of the structure cannot be accurately evaluated. Based on the twisting characteristics of the cable, this paper establishes a friction-slip test model and a refined numerical model to carry out detailed study of the mechanical behavior of contact between cable wires and joint during the tensioning process. Firstly, combined with the calculation results of contact mechanics, it is finds that the stress distribution at straight and curved sections of the cable are non-uniform along its axis and each cross section, and the non-uniformity coefficient of the internal force distribution of the cable is further quantified. At the same time, the local bending of the cable will intensify the uneven stress distribution in the circumferential direction of the cable. The non-uniformity of stress reveals the contact working mechanism of the cable-joint pair. Then, the change of the prestress loss between cable wires and joint with the tensioning process is analyzed, and the parametric analysis is conducted to reveal the effect of the cable included angle, tensile force, and lay length on the CSF. The results find that the prestress loss increases approximately linearly with the increase of tension force and decreases with the increase of the cable included angle, but the CSF is less affected by the lay length during the tensioning process. Finally, a method for valuing the CSF of the cable-supported structure is developed.

Theoretical and Experimental Study on Cable Tension Estimation by Vibration Method Accounting for Flexural Stiffness and Flexibility Support

Theoretical Analysis and Experimental Study on Sensitivity of Element-Length Error in Cable-Strut Tensile Structures

Sensitivity analysis on responses of adaptive cable-strut tensile structure with length changeable elements

Robustness Analysis of a Flexible Cable-Strut Tensile Structure

Inverse analysis method for calculating cable tension based on controlling the initial length of cables

Application of Wireless Cable Force Measurement System of Cable Structures

Monitoring of the Internal Force of the Flexible Components by Vibration Method

Experiment on cable tension and adjustment of truss string structure

Experimental Study on Stress Relaxation Properties of Structural Cables

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

The model experimental research on rib-patterned large-span spatial cable-truss tensile structure with annular plane

In-plane free vibrations of small-sag inclined cables considering bending stiffness with applications to cable tension identification

Assessment of cable tension condition based on optimum cable tension of cable-stayed bridge

Tension prediction for straight cables based on effective vibration length with a two-frequency approach

A New Measuring Method of Tension in Cable and Its Experimental Verification

Study on Eigen-sensitivity of Cable

A cable finite element formulation based on exact tension field for static nonlinear analysis of cable structures

Identification of cable tension through physical models and non-contact measurements

Identification of Time-Varying Cable Tension Forces Based on Adaptive Sparse Time-Frequency Analysis of Cable Vibrations

A vision-based method for estimating shallow cable tension via vibrational properties

Experimental Study and Fine-Tuned Simulation of Cable-Joint Pair Slipping in the Cable-Supported Structure