Abstract:Advances in Structural Engineering, Ahead of Print. Stratospheric airships require a lightweight envelope to contain lighter-than-air buoyancy gas, making the lightweight design and pressure-bearing performance of the envelope structure a key research issue. The stress state at different cross-sectional positions of the airship envelope structure is different, resulting in a low utilization rate of the overall material performance of the envelope structure. This paper proposes a design scheme for reinforcing envelope structures with sliding reinforcing cable to improve the bearing capacity of the composite fabric structure while reducing its weight, ultimately achieving the optimal strength-to-weight ratio. Two types of composite fabric structures (A-airship and B-airship) were subjected to inflatable burst tests, and the strain changes in the envelope gores were analyzed by digital image correlation. Through re-assembly of the broken composite fabric pieces and analysis of their tear textures, crack origination positions, failure causes, and the stress behavior and state at the failure position were identified. An envelope structural model with consideration of the cutting pattern effect was established, allowing the stress distribution of the envelope to be analyzed and the damage positions to be more accurately predicted. Based on the analysis of the ultimate pressure-bearing performance of an airship envelope structure, a novel idea of incorporating coupled tensile-shear stress into the strength criterion was proposed. Through the data in the study and existing references, it is verified that the strength criterion can accurately predict the ultimate pressure-bearing performance of the envelope structure.

Comparison Investigation for Architecture of Stratospheric Demonstration Airship

Analysis and Evaluation of Strengthening Effect of Inflatable Rings on Soft Stratospheric Airship

Structural Design Conception and Analysis for the Structural System of Large Flexible Airship

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

Structural Analysis of Flexible Airship on Stratospheric Platform Based on Engineering Elastic Theory

Equilibrium Configuration Analysis of Non-rigid Airship Subjected to Weight and Buoyancy

Structural performance analysis of a flexible airship and its suspended curtain

Deformation analysis method and performance evaluation for flexible airship of stratospheric platform considering pressure effects

Initial Configuration and Nonlinear Mechanical Analysis of Stratospheric Nonrigid Airship Envelope

Modeling and Simulation Analysis of Stratospheric Airship Envelope

Investigation of Airship Aeroelasticity Using Fluid-Structure Interaction*

Optimization Analysis of Stratospheric Airship Suspended Curtains

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Preliminary Reliability Analysis of A High-Altitude Airship'S Envelope

Structural Performance Evaluation Procedure for Large Flexible Airship of HALE Stratospheric Platform Conception

Vibration Characteristic Analysis and Experiment of Non-Rigid Airship with Suspended Curtain

Shape Optimization of Stratosphere Airship

Analysis of aerodynamics attribute of the Ⅴ-shaped airship

A Methodology for Optimisation Design and Analysis of Stratosphere Airship

Structural Design and Integral Assembly Procedure of Rigid-Flexible Tensegrity Airship Structure

Light weight optimization of stratospheric airship envelope based on reliability analysis