Abstract:Advances in Structural Engineering, Ahead of Print. Stratospheric airships require a lightweight envelope to contain lighter-than-air buoyancy gas, making the lightweight design and pressure-bearing performance of the envelope structure a key research issue. The stress state at different cross-sectional positions of the airship envelope structure is different, resulting in a low utilization rate of the overall material performance of the envelope structure. This paper proposes a design scheme for reinforcing envelope structures with sliding reinforcing cable to improve the bearing capacity of the composite fabric structure while reducing its weight, ultimately achieving the optimal strength-to-weight ratio. Two types of composite fabric structures (A-airship and B-airship) were subjected to inflatable burst tests, and the strain changes in the envelope gores were analyzed by digital image correlation. Through re-assembly of the broken composite fabric pieces and analysis of their tear textures, crack origination positions, failure causes, and the stress behavior and state at the failure position were identified. An envelope structural model with consideration of the cutting pattern effect was established, allowing the stress distribution of the envelope to be analyzed and the damage positions to be more accurately predicted. Based on the analysis of the ultimate pressure-bearing performance of an airship envelope structure, a novel idea of incorporating coupled tensile-shear stress into the strength criterion was proposed. Through the data in the study and existing references, it is verified that the strength criterion can accurately predict the ultimate pressure-bearing performance of the envelope structure.

Deformation analysis method and performance evaluation for flexible airship of stratospheric platform considering pressure effects

Analysis and Evaluation of Strengthening Effect of Inflatable Rings on Soft Stratospheric Airship

Analysis Methods of Structural Design and Characteristics of Numerical Algorithm for ETFE Air Inflated Film Structures

Bi-axial tensile test method and analytical algorithm of elastic constants for the airship envelope fabric

ETFE Air Cushion Membrane Configurations,Structural Performances and Material Properties Experiments

Mechanical Analysis of a Type of Hybrid Spatial Structure Composed of Cables, Bars and Beams

Deflection Analysis of the Airship Structure Based on the Tapered Inflatable Beam

Structure Optimization of Hydraulic Press Based on FE Analysis

STATIC AND DYNAMIC MECHANICS ANALYSIS FOR A LARGE-SCALE RIGIDITY-FLEXIBILITY AIRSHIP STRUCTURE

Numerical Analysis on Physical Mechanism of Flexible High-Rise's Unstable Aeroelastic Phenomena in Cross-Wind

Research on Innovative Fluid-Driven Pipe-Strut Tensegrity Structure

Pushover Analysis of Light-Weight Steel Portal Frame Structures under Strong Wind Loading

Thermal Distortion Analysis of Inflatable Antenna Structures Considering Inflation Gas

Experimental study and refined numerical simulation of ultimate pressure-bearing performance of rope-reinforced airship envelope structures

Study on unsaturated shapes of helium ballonet of rigid airship during ascent process

Stress and Deflection Analyses of Floating Roofs Based on a Load-Modifying Method

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Wind-induced Dynamic Response and Wind Load Factor for Flexible Roof Structures with Medium Deformation

Cross-sectional mechanical characteristics and sensitivity analysis of unbonded flexible risers under axial loads

Stiffness analysis and structural optimization design of an air spring for ships

Flexible dynamic analysis of an offshore wind turbine installed on a floating spar platform