Abstract:quality was proposed. This model revealed favorable lithofacies in deltaic sand bodies could form lithologic traps, which have important exploration and development value for lithologic hydrocarbon reservoirs.proposed an improved stacked model with a gate network module to predict the permeability of tight sandstone reservoirs. The GNS model can automatically evaluate the impact of various logging parameters and significantly improve the prediction accuracy, which helps to enhance the reliability of tight reservoir evaluation parameters.He et al. established a data-driven fracture propagation model and fracture channeling identification method, successfully explains the reason for cross-well fracture channeling, and its conclusion aligns with the actual monitoring results.Shi et al. proposed a method to characterize the regional distribution of complex multi-layer migration pathways for oil and gas in the paleo-slope zone outside petroliferous basins' source kitchens. This study established a method creatively for determining the threshold for oil and gas migration along sandbodies and faults, and it improves the exploration efficiency of petroleum in areas with similar geological conditions like eastern basins in China.Zhang et al. study the dynamic loss process and the molecular changes of hydrocarbons in preserved shale samples exposed in open air for different time, and reveal that there is a large amount of oil loss of about 42% to 78% for samples with maturity %Ro between 1.01 and 1.53. The oil loss is mainly contributed by free oil, while adsorbed oil remains unchanged. NMR T1-T2 mapping can be an important method to estimate in-situ fluid saturation without sample crushing.Dong et al. employed nuclear magnetic resonance (NMR), X-ray micro-computed tomography (micro-CT), and mercury injection capillary pressure (MICP) to analyze the descriptive topological and geometric features of carbonate samples from the Gaoshitti-Moxi area of the Sichuan Basin, compared the corresponding experimental results, and developed a novel comprehensive characterization approach for its parameters, which is conducive to characterizing the pore structure of carbonate rock.Zhou et al. characterized the source rocks and the structural evolution history is restored by using 2D-Move software. The characteristics of reservoirs and caps are clarified, and the controlling factors of reservoir formation are summarized. The sandstone reservoir has fracture and dissolution porosity, which provide storage space for oil accumulation. Faults and unconformities provide pathways for oil migration. The dense basalt is a good cap layer to preserve the reservoir. The research results are of great significance to guide future oil and gas exploration in the Liaohe Basin.Li et al. revealed the main controlling factors of reservoir heterogeneity in the Jiaxian area through thin rock sections, scanning electron microscopy, high-pressure mercury intrusion, and conventional property analysis. The multi-stage metamorphic hydrocarbon expulsion process in coal seams enriched the organic-inorganic interactions in coal-bearing strata, adding some reservoir capacity.Zhang et al. proposed a new method for dynamic monitoring of hydraulic fracturing of shale gas by borehole-to-surface Transient Electromagnetic Methods (BSTEM). By combining field-based shale gas fracturing monitoring models, the response patterns of the borehole-to-surface transient electromagnetic field under different fracturing stages are analyzed, which can guide importance for the application of borehole-to-surface transient electromagnetic methods in monitoring hydraulic fracturing of shale gas.Wang et al. constructed a three-dimensional model using hydraulic fracturing software based on the discrete lattice theory and synthetic rock mass method. The effect of a relatively short cluster spacing (5 m or less) on fracture propagation behavior was investigated through a series of case studies, considering operational parameters (injection rate, the number of fractures) and reservoir parameters (reservoir Young's modulus, stress anisotropy, principal stress direction).Wang et al. employed a well-seismic fusion method, incorporating RGB seismic attribute fusion technology, to classify and detail the sedimentary architecture of thin-layer beach-bar sand bodies in Niger's G oilfield. By integrating seismic attributes and well-logging data, it identifies the spatial distribution and connectivity of sand bodies, presenting a comprehensive architecture classification. These findings enhance the fine characterization of thin-layer beach-bar reservoirs, supporting efficient reservoir development and offering an important methodological reference for similar geological settings.He et al. explored the necessity of switching from water injection to natural gas injection in the fault-controlled fracture-cavity reservoir in Shunbei. They studied the o -Abstract Truncated-

Ultra‐thin, Lacustrine Sandstones Imaged on Stratal Slices in the Cretaceous Qijia Depression, Songliao Basin, China

Seismic Sedimentology of Nonclinoformal Deltaic Systems in Lacustrine Qijia Depression, Songliao Basin, China

Geophysical interpretation techniques for petroleum‐rich depression and application effects

The time-frequency analysis for delineating the thickness distribution of tight sandstones

Seismic Analysis of Very Thin Beds: Which Attribute to Use?

The seismic sedimentology application research for continental Compresso‐Shear Basin Clastics

Seismic Sedimentologic Analysis and Its Application in Areas with Complex Lithology — Case Study on Qibei Sag in Huanghua Depression

Seismic Reservoir Characterization of Thin‐bed Sandstone in CI Reservoir of TZ4 Oilfield, Tarim Basin

Sedimentary characteristics and implications for hydrocarbon exploration in a retrograding shallow-water delta: an example from the fourth member of the Cretaceous Quantou Formation in the Sanzhao depression, Songliao Basin, NE China

Identification Marks of Cretaceous Shallow‐Water Delta in the Songliao Basin, China

Identification of subtle seismic sequence boundaries by all‐reflector tracking method

Sedimentary Characteristics and Seismic Geomorphologic Responses of a Shallow-Water Delta in the Qingshankou Formation from the Songliao Basin, China

3-D Modeling of Transportation Framework of Tight Sandstone Reservoir in Foreland Thrust Belt, Kuqa Depression

Seismic Prediction of Sandstone Diagenetic Facies: Applied to Cretaceous Qingshankou Formation in Qijia Depression, Songliao Basin, East China

Prediction of ultrathin lacustrine sandstones by joint investigation of tectonic geomorphology and sedimentary geomorphology using seismic data

Depositional and diagenetic controls over reservoir quality of tight sandstone and conglomerate in the lower Cretaceous Shahezi formation, Xujiaweizi fault depression, Songliao basin, China

Introduction to Special Section: Seismic Sedimentology

Generalized S Transform and Its Application in a Typical Craton Basin in Western China

Seismic Amplitude Inversion for the Characterization of Interbedded Sand-Shale Reservoirs

Editorial: Unconventional resources: provenance analysis, sediment transport, reservoir evaluation, geo-energy

Factors Influencing Oil Saturation and Exploration Fairways in the Lower Cretaceous Quantou Formation Tight Sandstones, Southern Songliao Basin, China