Abstract:Mode-locked mid-infrared (mid-IR) fiber lasers are of increasing interest due to their many potential applications in spectroscopic sensors, infrared countermeasures, laser surgery, and high-efficiency pump sources for nonlinear wavelength convertors. Er3+-doped ZBLAN (ZrF4-BaF2-LaF3-AlF3-NaF) fiber lasers, which can emit mid-IR light at 2.65-2.9 mu m through the transition from the upper energy level I-4(11/2) to the lower laser level I-4(13/2), have attracted much attention because of their broad emission range, high optical efficiency, and the ready availability of diode pump lasers at the two absorption peaks of Er3+ ions (975 nm and 976 nm). In recent years, significant progress on high power Er3+-doped ZBLAN fiber lasers has been achieved and over 20 watt cw output at 2.8 mu m has been demonstrated; however, there has been little progress on ultrafast mid-IR ZBLAN fiber lasers to date. We report a passively mode-locked Er3+-doped ZBLAN fiber laser in which a Fe2+:ZnSe crystal was used as the intracavity saturable absorber. Fe2+:ZnSe is an ideal material for mid-IR laser pulse generation because of its large saturable absorption cross-section and small saturation energy along with the excellent opto-mechanical (damage threshold similar to 2 J/cm(2)) and physical characteristics of the crystalline ZnSe host. A 1.6 m double-clad 8 mol% Er3+-doped ZBLAN fiber was used in our experiment. The fiber core has a diameter of 15 mu m and a numerical aperture (NA) of 0.1. The inner circular cladding has a diameter of 125 mu m and an NA of 0.5. Both continuous-wave and Q-switched mode-locking pulses at 2.8 mu m were obtained. Continuous-wave mode locking operation with a pulse duration of 19 ps and an average power of 51 mW were achieved when a collimated beam traversed the Fe2+:ZnSe crystal. When the cavity was modified to provide a focused beam at the Fe2+:ZnSe crystal, Q-switched mode-locked operation with a pulse duration of 60 ps and an average power of 4.6 mW was achieved. More powerful and narrower pulses are expected if the dispersion of the cavity can be properly managed.

Theoretical analysis and design of mid-infrared ZBLAN fiber Raman laser

Theoretical Study and Optimization of A High Power Mid-Infrared Erbium-Doped Zblan Fibre Laser

Theoretical Analysis and Optimization of Mid-Infrared Chalcogenide Fiber Raman Laser Pumped at 2 Μm

Optimized design of high power mid-infrared Er3+, Pr3+-codoped ZBLAN fiber laser

Theoretical Analysis and Heat Dissipation of Mid-Infrared Chalcogenide Fiber Raman Laser

Modeling and Optimization of Actively Q-switched 2.8 Μm Er3+-doped ZBLAN Fiber Laser

Numerical Simulation and Optimization of 3.5 Μm Erbium-Doped ZrF4 Fiber Laser Pumped at 655 and 1981 Nm

Spatiotemporal mode-locking in a linear-cavity Er:ZBLAN fiber laser

Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by $\hbox{tm}^{3+}$ -Doped Fiber Laser

Theoretical and experimental researches on gain-switched Tm3+-doped fiber laser

Design and Analysis of a Novel Multipumped Raman Fiber Amplifier

Numerical Modeling and Optimization of Mid-Infrared Fluoride Glass Raman Fiber Lasers Pumped by <formula formulatype="inline"><tex Notation="TeX">$\hbox{Tm}^{3+}$</tex></formula>-Doped Fiber Laser

Dual-wavelength bidirectional pumped high-power Raman fiber laser

Modeling of A Cascaded Mid-Infrared Fiber Laser at 2.78 μm and 3.44 μm Dual-Wavelength Pumped at 0.98 μm and 1.15 μm

Inverse saturable absorption mechanism and design optimization of mode-locked fiber lasers with a nonlinear amplifying loop mirror

Nonlinear Dynamics of Four-Wave Mixing, Cascaded Stimulated Raman Scattering and Self Q-switching in a Common-Cavity Ytterbium/raman Random Fiber Laser

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Picosecond Passively Mode-Locked Mid-Infrared Fiber Laser

Detailed Investigation on Gain-Clamping Characteristics of Ultralong Fiber Raman Laser Using FBGs

An experimental and theoretical study on Dy 3+ -doped ZBLAN fiber laser, core-pumped at 1.1 μm