Abstract:Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation (RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Friction Compensation Using Observers with Time-Varying Gain

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-Based Friction Compensation

Adaptive Dynamic Friction Compensation for an Electro-Optical Platform Inertial Stabilization System

Observer-based friction compensation in heavy-duty parallel robot control

Friction compensation for servo systems

Compensator of the Disturbance Force for the Trajectory Tracking of Hydraulic 6-DOF Parallel Platform

Friction Compensation in Mechanical Bearing Control System

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

An Adaptive Friction Compensation Method for High-Precision Turntable System

Friction Compensation Design Based on State Observer and Adaptive Law for High-Accuracy Positioning System

Friction compensation and observer-based adaptive sliding mode control of electromechanical actuator

Frication Compensation and Disturbance Observer Design for a High Acceleration Precision Direct Drive Motion Stage

Nonlinear Friction Compensation and Disturbance Observer for a High-Speed Motion Platform

Observer-Based Backstepping Adaptive Force Control of Electro-Mechanical Actuator with Improved LuGre Friction Model

Adaptive Extended State Observer-Based Velocity-Free Servo Tracking Control with Friction Compensation

Two-Axis Optoelectronic Stabilized Platform Based on Active Disturbance Rejection Controller with LuGre Friction Model

Adaptive backstepping-extended state observer control for electrohydraulic position servo systems with multiple disturbances using the compound friction compensation

Nonlinear Friction Compensation for PMLSM Using an Enhanced Adaptive Friction Observer

A Contraction Theory-Based Tracking Control Design With Friction Identification and Compensation

Friction compensation using adaptive non-linear control with persistent excitation