Abstract:In recent years, structural health monitoring has been paid more and more attention in bridge engineering community. Previous researches showed that ambient temperature was one of principal factors affecting structural modal parameters in long-term. In this paper, an experimental study on correlation between dynamic properties of a cable-stayed bridge and its structural temperature was performed under temperature controlled laboratory environment. Using hammer impacting method, a dynamic testing was conducted based on a steel cable-stayed bridge model which had a span layout of 0.9+1.9+0.9m. During the experiment, the first six vertical bending modes under the environmental temperature of 0, 20 and 40°C were identified with the consideration of three kinds of boundary conditions at the deck’s ends as to two degrees of freedom, i.e. the longitudinal translation (UX) and the rotation about the transverse beam (RotZ). The above boundary conditions are UX & RotZ not constrained, UX constrained only and UX & RotZ constrained, attempting to simulate the different conditions of the bridge expansion joints. The efforts were paid to explain the physical mechanism of the results based on the updated FE model. This experimental study indicates a tendency that the frequency of the cable-stayed bridge model decreases with the increase of temperature. And furthermore, the relative difference of frequencies between 0 and 40 °C is affected by boundary conditions; in other words, when the deck is free to expand, the variation of model’s frequencies is smaller than that when the deck is restrained to expand, which is similar to the condition of the bridge’s expansion joints cannot work as normal. This experimental study can give some reference to the research of SHM and damage identification for cable-stayed bridges.

Research on correlation of modal frequency of long-span Bridge structures and environmental temperature

Evaluation of Thermal Effects on Cable Forces of a Long-Span Prestressed Concrete Cable–Stayed Bridge

Correlation Study on Modal Frequency and Temperature Effects of A Cable-Stayed Bridge Model

Temperature Effects on Modal Frequencies of Long-Span Cable-Stayed Bridges

Correlation Analysis of Large-Span Cable-Stayed Bridge Structural Frequencies with Environmental Factors Based on Support Vector Regression

Environmental variability in modal frequency identificationof Runyang Cable-Stayed Bridge

Environmental Effects on Modal Frequency of Long-Span Cable-Stayed Bridges

Influence of Temperature on Modal Parameters of Bridge

Modal Test and Analysis of A Bridge under the Varying Temperature Condition

Experimental Study On The Effect Of Temperature On Modal Frequencies Of Bridges

Analysis on Modal Frequency Variation of a Cable-Stayed Bridge Based on Monitoring Data

Effect analysis of environmental factors on structural modal parameters of a cable-stayed bridge

Strain-temperature Correlation Analysis of a Tied Arch Bridge Using Monitoring Data

Temperature Effect on Modal Frequencies for a Rigid Continous Bridge Based on Long Term Monitoring

RESEARCH ON CORRELATION OF MODAL FREQUENCY AND SEASONAL TEMPERATURE OF RUNYANG SUSPENSION BRIDGE

Effect of Temperature on Modal Variability of a Curved Concrete Bridge under Ambient Loads

Temperature-induced variations of measured modal frequencies of steel box girder for a long-span suspension bridge

Temperature Effects on Modal Parameters and Its Experimental Validation

Effects of Temperature on Modal Characteristics of Non-Uniform Rigid-Frame Bridges

Effect of Boundary Conditions on Modal Parameters of the Run Yang Suspension Bridge

Identification of Environmental Modal Frequencies Using Maximum Entropy Method for Long-span Cable-stayed Bridges