Abstract:Due to the growing interest from engine and aircraft manufacturers for contra-rotating open rotors (CROR), much effort is presently devoted to the development of reliable computational fluid dynamics (CFD) methodologies for the prediction of performance, aerodynamic loads, and acoustics. Forces transverse to the rotation axis of the propellers, commonly called in-plane forces (or sometimes 1P forces), are a major concern for the structural sizing of the aircraft and for vibrations. In-plane forces impact strongly the stability and the balancing of the aircraft and, consequently, the horizontal tail plane (HTP) and the vertical tail plane (VTP) sizing. Also, in-plane forces can initiate a flutter phenomenon on the blades or on the whole engine system. Finally, these forces are unsteady and may lead to vibrations on the whole aircraft, which may degrade the comfort of the passengers and lead to structural fatigue. These forces can be predicted by numerical methods and wind tunnel measurements. However, a reliable estimation of in-plane forces requires validated prediction approaches. To reach this objective, comparisons between several numerical methods and wind tunnel data campaigns are necessary. The primary objective of the paper is to provide a physical analysis of the aerodynamics of in-plane forces for a CROR in high speed at nonzero angle of attack using unsteady simulations. Confidence in the numerical results is built through a code-to-code comparison, which is a first step in the verification process of in-plane forces prediction. Thus, two computational processes for unsteady Reynolds-averaged Navier–Stokes (URANS) simulations of an isolated open rotor at nonzero angle of attack are compared: computational strategy, open rotor meshing, aerodynamic results (rotor forces, blades thrust, and pressure distributions). In a second step, the paper focuses on the understanding of the key aerodynamic mechanisms behind the physics of in-plane forces. For the front rotor, two effects are predominant: the first is due to the orientation of the freestream velocity, and the second is due to the distribution of the induced velocity. For the rear rotor, the freestream velocity effect is reduced but is still dominant. The swirl generated by the front rotor also plays a major role in the modulus and the direction of the in-plane force. Finally, aerodynamic interactions are found to have a minor effect.

Rans Simulation Of The Performances Of Contra-Rotating Propellers

Effect of Relative Positions between Blade and Volute Tongue on Prediction of Performance in Simulation of Centrifugal Pump

Numerical study of the hydrodynamic performances of surface piercing propeller

Parameterized design method and verification of propeller single-passage domain

RANSE simulations for unmanned sailboat performance prediction: Coupling aerodynamics and hydrodynamics in self-sailing

Numerical Investigation of Influence of Rotor-Rotor Gap on Performances of Contra-Rotating Axial Flow Pump

Modeling and the Control Strategy of the Coaxial Contra-Rotating Propeller System

Computational Fluid Dynamics Analyses of a Wing with Distributed Electric Propulsion

Rans-Based CFD Prediction of the Hydrodynamic Coefficients of Darpa Suboff Geometry in Straight-Line and Rotating Arm Manoeuvres

Numerical simulation to assess hydrodynamic performance of cycloidal propellers during maneuvering

Numerical prediction of the performance of marine propellers using computational fluid dynamics simulation with transition-sensitive turbulence model

A Comparison of Physical and Numerical Modeling of Homogenous Isotropic Propeller Blades

Assessments of propulsion models for free running surface ship turning circle simulations

Fast-running CFD calculations of the ONR Tumblehome performing maneuvers in calm water and in waves using a Gaussian process regression propeller and rudder model

Hybrid Aerodynamic Optimization of a Propeller Based on the Reformulated Blade Element Momentum Theory

Propulsion simulation on fully appended ship model

Numerical Simulation of Unsteady Flow Around Propeller Based on CFD Technology

Numerical Approach Based on Solving 3D Navier–Stokes Equations for Simulation of the Marine Propeller Flow Problems

URANS simulations for a free-running container ship: Part 1. Turning-circle

Two-dimensional simulation of the hydrodynamic performance of a cycloidal propeller

In-Plane Forces Prediction and Analysis in High-Speed Conditions on a Contra-Rotating Open Rotor