Abstract:The control of the performance of single-walled carbon nanotube (SWCNT) random network-based transistors is of critical importance for their applications in electronic devices, such as complementary metal oxide semiconducting (CMOS)-based logics. In ambient conditions, SWCNTs are heavily p-doped by the H2O/O2 redox couple, and most doping processes have to counteract this effect, which usually leads to broadened hysteresis and poor stability. In this work, we coated an SWCNT network with various common polymers and compared their thin-film transistors' (TFTs') performance in a nitrogen-filled glove box. It was found that all polymer coatings will decrease the hysteresis of these transistors due to the partial removal of charge trapping sites and also provide the stable control of the doping level of the SWCNT network. Counter-intuitively, polymers with electron-withdrawing functional groups lead to a dramatically enhanced n-branch in their transfer curve. Specifically, SWCNT TFTs with poly (vinylidene fluoride) coating show an n-type mobility up to 61 cm2/Vs, with a decent on/off ratio and small hysteresis. The inverters constructed by connecting two ambipolar TFTs demonstrate high gain but with certain voltage loss. P-type or n-type doping from polymer coating layers could suppress unnecessary n- or p-branches, shift the threshold voltage and optimize the performance of these inverters to realize rail-to-rail switching. Similar devices also demonstrate interesting antiambipolar performance with tunable on and off voltage when tested in a different configuration.

Reversible underwater switching between superoleophobicity and superoleophilicity on conducting polymer nanotube arrays

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Polymer Coating Enabled Carrier Modulation for Single-Walled Carbon Nanotube Network Inverters and Antiambipolar Transistors

PANI nanowire film with underwater superoleophobicity and potential-modulated tunable adhesion for no loss oil droplet transport

Surface Wettability Switched Cell Adhesion and Detachment on Conducting Polymer Nanoarray

Reversible superhydrophobic-superhydrophilic transition of ZnO nanorod/epoxy composite films.

Reversible Superwettability Switching of a Conductive Polymer Membrane for Oil-Water Separation and Self-Cleaning

Microstructured Nematic Liquid Crystalline Elastomer Surfaces with Switchable Wetting Properties

Electrodeposited Surfaces with Reversibly Switching Interfacial Properties.

Elaboration of voltage and ion exchange stimuli-responsive conducting polymers with selective switchable liquid-repellency

Switchable Wettability on Cooperative Dual-Responsive Poly-L-lysine Surface.

UV-manipulated Wettability Between Superhydrophobicity and Superhydrophilicity on a Transparent and Conductive SnO2 Nanorod Film.

Reversible Switching of Water‐Droplet Mobility on a Superhydrophobic Surface Based on a Phase Transition of a Side‐Chain Liquid‐Crystal Polymer

Reversible switchable wettability of intrinsic micro/nanostructured pollen microcarriers via pH-induce from superhydrophobicity to superhydrophilicity

Conducting polyaniline/poly(tetrafluoroethylene) composite films with tunable surface morphology and hydrophilicity

Wetting-induced superlyophobic polyacrylonitrile membranes: from reversible wettability to switchable on-demand emulsion separation

Randomly heterogeneous oleophobic/pH-responsive polymer coatings with reversible wettability transition for multifunctional fabrics and controllable oil–water separation

Chemical Dual-Responsive Wettability Of Superhydrophobic Pani-Pan Coaxial Nanofibers

Reversible Switching Between Isotropic and Anisotropic Wetting by One-Direction Curvature Tuning on Flexible Superhydrophobic Surfaces

Smart Responsive Surfaces Switching Reversibly Between Super-Hydrophobicity and Super-Hydrophilicity

Surface-dependent Self-Assembly of Conducting Polypyrrole Nanotube Arrays in Template-Free Electrochemical Polymerization.