Abstract:A series of Polyaniline (PANI) nanofibers were prepared as conductive filler. The polyvinyl alcohol (PVA)/agarose (AG) double network hydrogel was used as flexible substrate. PANI/PVA/AG conductive hydrogel was prepared by in-situ polymerization of polyaniline nanofibers in PVA/AG double network hydrogel. The electrochemical performance of the PANI/PVA/AG hydrogel electrode material was linked to the fiber morphology of polyaniline. The doping of polyaniline with 0.020 mol/L citric acid demonstrated superior fiber morphology compared to doping with other citric acid concentrations, achieving fiber ratios of 80%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.020 mol/L citric acid was 285 mF/cm2, while the conductivities was 7.1 S/m. The doping of polyaniline with 0.5 mol/L hydrochloric acid demonstrated superior fiber morphology compared to doping with other hydrochloric acid concentrations, achieving fiber ratios of 65%. The specific capacitance of the PANI/PVA/AG hydrogel electrode materials doped with 0.5 mol/L hydrochloric acid was 249 mF/cm2, while the conductivities was 7.6 S/m. After 500 cycles of charge-discharge, the specific capacitance retention of the material was 73%. Photosensitivity tests indicated that the hydrogel exhibited high sensitivity to shorter wavelengths of blue light (460 nm) and ultraviolet light (380 nm). The hydrogel sensor had a high sensitivity to the strain in the range of 0% to 120%. The Gauge factors (GF) of the hydrogel strain sensor were 1.280, 2.141, 1.907, and 1.261 for strain ranges of 0% to 30%, 30% to 60%, 60% to 90%, and 90% to 120%, respectively. The cyclic strain tensile tests indicated that the relative resistance change rate (ΔR/R0) of the hydrogel sensor demonstrated a certain degree of repeatability and stability within the range of 0% to 100%. Thus, the hydrogel sensor has reliability and stability in the signal transmission process of detecting human movement as a flexible strain sensor. These results suggest that the PANI/PVA/AG conductive hydrogel is a multifunctional composite with good electrochemical storage performance, photosensitivity, and strain sensitivity, which can be applied to applications such as supercapacitors, flexible sensors and electronic wearable devices.

Chemical Dual-Responsive Wettability Of Superhydrophobic Pani-Pan Coaxial Nanofibers

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Electrospun nanofibers of polymer composite as a promising humidity sensitive material

Enhancement of adhesion, mechanical strength and anti-corrosion by multilayer superhydrophobic coating embedded electroactive PANI/CNF nanocomposite

Conducting polyaniline/poly(tetrafluoroethylene) composite films with tunable surface morphology and hydrophilicity

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

Tuning a Superhydrophobic Surface on an Electrospun Polyacrylonitrile Nanofiber Membrane by Polysulfone Blending

Flexible Conductive Fibers from Alginate, Cellulose Nanocrystals, and Polyaniline by Wet Spinning

Nanoscale chemical heterogeneity enables the co-existence of opposing superhydrophobic and hygroscopic properties

Synthesis of Highly Hydrophilic Polyaniline Nanowires and Sub‐Micro/Nanostructured Dendrites on Poly(propylene) Film Surfaces

Wetting-induced superlyophobic polyacrylonitrile membranes: from reversible wettability to switchable on-demand emulsion separation

Multifunctional Superhydrophobic Polymer/Carbon Nanocomposites: Graphene, Carbon Nanotubes, or Carbon Black?

PANI nanowire film with underwater superoleophobicity and potential-modulated tunable adhesion for no loss oil droplet transport

Wettability switching of SDS-doped polyaniline from hydrophobic to hydrophilic induced by alkaline/reduction reactions.

Nano-casting technique to prepare polyaniline surface with biomimetic superhydrophobic structures for anticorrosion application

In Situ Reversible Tuning from Pinned to Roll-Down Superhydrophobic States on a Thermal-Responsive Shape Memory Polymer by a Silver Nanowire Film.

Multifunctional polyaniline nanofibers conductive hydrogel for supercapacitors and flexible sensors

Polymer Nanowire Arrays With High Thermal Conductivity and Superhydrophobicity Fabricated by a Nano-Molding Technique

H2O2-assisted preparation of superhydrophilic polyacrylonitrile fabric and its application for the separation of oil/water mixture

Facile fabrication of durable mesh with reversible photo-responsive wettability for smart oil/water separation

Electrically Conductive Polyaniline/Polyimide Nanofiber Membranes Prepared via a Combination of Electrospinning and Subsequent In situ Polymerization Growth