Abstract:Increasing concerns over energy consumption and greenhouse gas emissions in buildings have contributed to the emerging of innovative PV glazing technologies to improve the building energy performance. However, some of these glazing systems have complex structures, making it challenging to investigate their optical, thermal and electrical performance for estimating their energy saving potential in buildings. In this research, a validated Computational Fluid Dynamics (CFD) combined with a ray-tracing model has been developed to accurately predict the optical, thermal and electrical performance of complex PV glazing systems under varying incident angles. A ray-tracing model is developed to calculate the light transmittance of the window and the solar energy absorbed by each solid element and PV cells. To estimate temperature profiles (e.g., PV temperature and window temperature) and secondary heat within the window, the results from the ray-tracing analysis, which detail the solar flux absorbed by each layer, are inputted into a validated CFD model as boundary conditions. Using the CFD combined ray-tracing calculation illustrated above, the Solar Heat Gain Coefficient (SHGC) of these complex PV window systems can be obtained. Furthermore, a PV modelling algorithm is developed to predict the power output based on the simulated PV temperature. This procedure is implemented to investigate a Crossed Compound Parabolic Concentrator Photovoltaic (CCPC-PV) window, which serves as an example of a complex PV glazing system in this study. The developed optical, thermal and electrical models have been validated through experimental tests. Additionally, new configurations have been designed to explore the impact of the pitch between adjacent optics on the SHGC and power output of the window. The results show that the original window (1.77 mm-pitch) possesses the maximum PV temperature of 64.73 °C and the maximum window inside surface temperature of 61.58 °C under National Fenestration Rating Council (NFRC) standard. Meanwhile the PV efficiency is 15.21 % and the SHGC is 0.463. The SHGC value of this innovative PV window is notably lower than that of a conventional double-glazed window, which has a SHGC value of 0.813. This reduction in SHGC decreases the likelihood of overheating issues, especially during the summer months.

Evaluation of Monte Carlo Method for Modeling Glazing Behavior During Radiant Exposure

Assessment Of Monte Carlo Method In Calculating Radiative Heat Transfer Through Glass

Cracking Behavior of Glazings with Different Thicknesses by Radiant Exposure

Simulating the thermal response of glass under various shading conditions in a fire

Determination of Critical Breakage Conditions for Double Glazing in Fire

Thermal Response of Low-E and Float Glass Facades under Various Heating Rates

Temperature and Thermal Stress Simulation of Window Glass Exposed to Fire

Investigation of Thermal Breakage and Heat Transfer in Single, Insulated and Laminated Glazing under Fire Conditions

Numerical Study on Fire Response of Glass Facades in Different Installation Forms

Numerical Simulation For Blast Analysis Of Insulating Glass In A Curtain Wall

Modeling of Coupled Heat Transfer in a Windowed Volumetric Solar Receiver

Simplified Structural Analysis of Laminated Glass Panels during Fire Exposure

Development of a comprehensive method to estimate the optical, thermal and electrical performance of a complex PV window for building integration

Monte Carlo Method for Simulating the Radiative Characteristics of an Anisotropic Medium

Assessment of a Model Development for Window Glass Breakage Due to Fire Exposure in a Field Model

Monte Carlo Simulation of Radiative Transfer in Scattering, Emitting, Absorbing Slab with Gradient Index

Experimental study on fire response of double glazed panels in curtain walls

Experimental Investigation on Glass Cracking for Wind Load Combined with Radiant Heating

Study on a Criterion of Heat Flux for Glass Breaking in Fires

A low-time complexity semi-analytic Monte Carlo radiative transfer model: Application to optical characteristics of complex spatial targets

NUMERICAL PREDICTION ON THE FIRST BREAKING TIME OF GLASS IN FIRE CONDITIONS