Abstract:The practical application of high-voltage lithium cobalt oxide (LCO) has been hampered by the severe degradation of its structural integrity. In this work, a protective bilayer was fabricated on LCO surfaces by means of large-scale and facile electrolyte engineering. The protective bilayer consisting of a LiF-rich cathode-electrolyte interphase (CEI) as the outermost layer and a layer of disordered spinel structure as the inner layer was uniformly fabricated in-situ. The high-resistance CEI layer inhibited the fast transfer of Li ions from LCO to bulk electrolyte during the first few cycles, resulting in the significantly increased local overpotential on the LCO surface. As a consequence, the LCO surface underwent a phase transformation from the layered phase to the spinel phase first, forming the spinel phase inner layer due to the voltage rising beyond 4.55 V (vs. Li/Li + ). The CEI and spinel layers effectively blocked the dissolution of transition-metal (TM) ions into the electrolyte during cycling and inhibited the formation of the structurally defective rock-salt phase that would hasten cycling-induced structural degradation. The formation of the protective bilayer effectively prevented the phase transition from the bulk layered LCO structure into spinel and then rock salt, thereby reducing decay of its cycling capacity. Remarkably, the graphite||LCO pouch cell with optimized electrolyte retained 78.9% of its capacity even after 1000 cycles under the operation voltage window of 3.0-4.55 V (vs. Li/Li + ). This study provides guidance for the development of effective surface treatment strategies for stable layered cathodes with high capacity and cyclability.

First-Principles Study of H+ Intercalation in Layer-Structured LiCoO2

Off-Stoichiometry Induced Few-Nanometer Surface Layer for High-Performance Layered Cathode in Nonaqueous and Aqueous Electrolytes

Atomic‐Scale Observation of LiFePO4 and LiCoO2 Dissolution Behavior in Aqueous Solutions

Stabilizing Layered Structure in Aqueous Electrolyte via Dynamic Water Intercalation/Deintercalation

Stabilizing Layered Structure in Aqueous Electrolyte via O2‐Type Oxygen Stacking

In-Situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO 2 Cathode at High-Voltage

First-Principles Study of Lithium Cobalt Spinel Oxides: Correlating Structure and Electrochemistry

In-situ Constructed Protective Bilayer Enabling Stable Cycling of LiCoO2 Cathode at High-Voltage

<i>In</i><i>-situ</i> constructed protective bilayer enabling stable cycling of LiCoO<sub>2</sub> cathode at high-voltage

Effect of microstructure change on resistance of spherical LiCoO<sub>2</sub> to electrode degradation for proton intercalation

Investigation on the Overlithiation Mechanism of LiCoO 2 Cathode for Lithium Ion Batteries

Hybrid aqueous energy storage cells using activated carbon and lithium-ion intercalated compounds: III. Capacity fading mechanism of LiCo 1/3Ni1/3Mn1/3O2 at different pH electrolyte solutions

Mechanochemically Robust LiCoO<sub>2</sub> with Ultrahigh Capacity and Prolonged Cyclability

Mechanochemically Robust LiCoO2 with Ultrahigh Capacity and Prolonged Cyclability

Structure/Interface Coupling Effect for High‐Voltage LiCoO<sub>2</sub> Cathodes

The Study of the First Lithium Intercalation /deintercalation Ion in Bedded Li (Ni1-Xcox) O2 Structure

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathodes

Electrochemically Driven Phase Transition in LiCoO2 Cathode

Structure/Interface Coupling Effect for High‐Voltage LiCoO2 Cathode

Stable Heteroepitaxial Interface of Li-rich Layered Oxide Cathodes with Enhanced Lithium Storage

Study of the Lithium/nickel Ions Exchange in the Layered LiNi0.42Mn0.42Co0.16O2 Cathode Material for Lithium Ion Batteries: Experimental and First-Principles Calculations