Abstract:This paper examines polymer film morphology and several important properties of polyethylene-graft-sulfonated polyarylene ether sulfone (PE-g-s-PAES) proton exchange membranes (PEMs) for direct methanol fuel cell applications. Due to the extreme surface energy differences between a semi-crystalline and hydrophobic PE backbone and several amorphous and hydrophilic s-PAES side chains, the PE-g-s-PAES membrane self-assembles into a unique morphology, with many proton conductive s-PAES channels embedded in the stable and tough PE matrix and a thin hydrophobic PE layer spontaneously formed on the membrane surfaces. In the bulk, these membranes show good mechanical properties (tensile strength >30 MPa, Young's modulus >1400 MPa) and low water swelling ( < 15) even with high IEC >3 mmol/g in the s-PAES domains. On the surface, the thin hydrophobic and semi-crystalline PE layer shows some unusual barrier (protective) properties. In addition to exhibiting higher through-plane conductivity (up to 160 mS/cm) than in-plane conductivity, the PE surface layer minimizes methanol cross-over from anode to cathode with reduced fuel loss, and stops the HO center dot and HO2 center dot radicals, originally formed at the anode, entering into PEM matrix. Evidently, the thin PE surface layer provides a highly desirable protecting layer for PEMs to reduce fuel loss and increase chemical stability. Overall, the newly developed PE-g-s-PAES membranes offer a desirable set of PEM properties, including conductivity, selectivity, mechanical strength, stability, and cost-effectiveness for direct methanol fuel cell applications.

Graft-crosslinked copolymers based on poly(arylene ether ketone)-gc-sulfonated poly(arylene ether sulfone) for PEMFC applications.

PEMs with High Proton Conductivity and Excellent Methanol Resistance Based on Sulfonated Poly (aryl Ether Ketone Sulfone) Containing Comb-Shaped Structures for DMFCs Applications

Sulfonated poly(arylene ether sulfone)s membranes with distinct microphase-separated morphology for PEMFCs

Polymer Electrolyte Fuel Cell Performance of Poly(Arylene Ether Ketone)-Graft-Crosslinked-Poly(Sulfonated Arylene Ether Sulfone)

Cross-linked sulfonated poly(phathalazinone ether ketone)s for PEM fuel cell application as proton-exchange membrane

Preparation of Graft Poly(Arylene Ether Sulfone)s-Based Copolymer with Enhanced Phase-Separated Morphology As Proton Exchange Membranes Via Atom Transfer Radical Polymerization

Design of Polyphosphazene-Based Graft Copolystyrenes with Alkylsulfonate Branch Chains for Proton Exchange Membranes

Preparation and properties of crosslinked multiblock sulfonated poly(arylene ether sulfone) membranes for fuel cell applications

Quinoxaline-Based Crosslinked Membranes of Sulfonated Poly(Arylene Ether Sulfone)S for Fuel Cell Applications

Preparation and Properties of Crosslinked Hybrid Proton Exchange Membrane Based on Sulfonated Poly (arylene Ether Nitrile) with Improved Selectivity for Fuel Cell Application

Preparation and Properties of Novel Sulfonated Poly(P-Phenylene-Co-Aryl Ether Ketone)S for Polymer Electrolyte Fuel Cell Applications

Novel postsulfonated poly(ether ether ketone)-block-poly(ether sulfone)s as proton exchange membranes for fuel cells: Design, preparation and properties

Characterization of Polyethylene-Graft-Sulfonated Polyarylsulfone Proton Exchange Membranes for Direct Methanol Fuel Cell Applications

High conductive and dimensional stability proton exchange membranes with an all-carbon main chain and densely sulfonated structure

Poly(Arylene Ether)s with Sulfonic Acid Groups on the Backbone and Pendant for Proton Exchange Membranes Used in PEMFC Applications

Preparation of sulfonated poly(ether ether ketone)s containing amino groups/epoxy resin composite membranes and their in situ crosslinking for application in fuel cells

Comb-shaped sulfonated poly(aryl ether sulfone) proton exchange membrane for fuel cell applications

Novel hybrid polymer electrolyte membranes prepared by a silane-cross-linking technique for direct methanol fuel cells

Synthesis And Properties Of Sulfonated Poly(Phosphazene)-Graft-Poly(Styrene-Co-N-Benzylmaleimide) Copolymers Via Atom Transfer Radical Polymerization For Proton Exchange Membrane

Fluorene-Based Poly(arylene Ether Sulfone)s Containing Clustered Flexible Pendant Sulfonic Acids As Proton Exchange Membranes

Cross-linked Hydroxide Conductive Membranes with Side Chains for Direct Methanol Fuel Cell Applications