Selective CO2 Capture by a 3d–4d Coordination Polymer Material with 1D Channel

Sheng-Li Huang,Guo-Xin Jin

DOI: https://doi.org/10.1039/c1ce05474k

IF: 3.756

2011-01-01

CrystEngComm

Abstract:A porous TMCP material [Ni(cyclam)Pd(2,4-pydca)(2)center dot 4H(2)O](n) (2) was constructed from the metallotecton [Pd(2,4-Hpydca)(2))] and [Ni (cyclam)](ClO4)(2), and it showed highly selective capture of CO2 over N-2.

What problem does this paper attempt to address?

Combined CO2-philicity and Ordered Mesoporosity for Highly Selective CO2 Capture at High Temperatures

Ji Hoon Lee,Hyeon Jeong Lee,Soo Yeon Lim,Byung Gon Kim,Jang Wook Choi

DOI: https://doi.org/10.1021/jacs.5b03579

IF: 15

2015-01-01

Journal of the American Chemical Society

Abstract:Various dry sorbents have been lately introduced as promising media to capture carbon dioxide (CO2). However, it is still desirable to further improve their performance in diverse aspects, and high temperature selectivity of CO2 over other gases is clearly one of them. Here, we report a co-assembly approach to turn nonporous melamine resin to a highly ordered mesoporous polymeric network (space group: Im3̅m) containing high nitrogen content (∼18 at%). This mesoporous network shows anomalously increasing CO2/N2 selectivity with temperature rise, with the selectivity at 323 K reaching 117 (Henry method). This selectivity behavior is attributed to a combined effect of the high nitrogen content allowing for high binding affinity with CO2 and well-defined mesopores (2.5-2.9 nm) accelerating release of N2 with temperature rise. The given orthogonal approach suggests a new direction in designing dry sorbents with excellent selectivities at high temperatures.
Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Junjie Zhu,Linbo Wu,Zhiyang Bu,Suyun Jie,Bo-Geng Li

DOI: https://doi.org/10.1021/acs.iecr.7b01961

2017-01-01

Industrial & Engineering Chemistry Research

Abstract:Porous cross-linked polymers containing pendant triazole groups were synthesized from glycidyl methacrylate (GMA) in the presence of divinylbenzene via high internal phase emulsion (HIPE) templating method followed by functionalization with sodium 3-amino-1,2,4-triazole (ATANa). They were characterized with FTIR, SEM, BET, and mercury intrusion and assessed as CO2 adsorbents. With interconnected hierarchical porous structure and abundant triazole groups which absorbed CO2 chemically in 1:1 stoichiometry, the adsorbents exhibited high CO2 adsorption capacity (3.6 mmol g(1), at 25 degrees C and 1 atm) and rate, and good CO2/N-2 selectivity (similar to 30). The adsorbents also displayed easy CO2 desorption with medium desorption heat (58 kJ/mol CO2), acceptable moisture endurance, and excellent recyclability. The results suggest that these functionalized porous polymers are potential adsorbents for CO2 capture
Interplay of Tri- and Bidentate Linkers to Evolve Micropore Environment in a Family of Quasi-3D and 3D Porous Coordination Polymers for Highly Selective CO2 Capture.

Shuang Liu,Qiubing Dong,Daqi Wang,Yang Wang,Huijie Wang,Yuhang Huang,Suna Wang,Lantao Liu,Jingui Duan

DOI: https://doi.org/10.1021/acs.inorgchem.9b02774

IF: 4.6

2019-01-01

Inorganic Chemistry

Abstract:In the design and construction of porous materials, these with exceptional structure and composition are often highly expected, as they may offer unique nanopore space for desired applications. Here, a new family of quasi-3D and a 3D porous coordination polymers (PCPs) (termed NTU-43 to NTU-50) were constructed via an evolution strategy from a layered structure (termed NTU-42). Single gas adsorption isotherms of CO2, N2, and CH4 display the dependency of gas capacity on optimized effects of pore size, functionality, and charged framework of these quasi-3D PCPs, where NTU-45 and NTU-46, the two with NH2-BDC and OH-BDC bidentate linkers (NH2-BDC = 2-aminoterephthalic acid and OH-BDC = 2-hydroxyterephthalic acid) have demonstrated outstanding ability for selective CO2 uptake. To the best of our knowledge, this is the first time to well explore the synergistic effects toward gas adsorption on a platform of quasi-3D frameworks. More importantly, the efficient CO2 capture from CO2/CH4 and CO2/N2 mixtures has been also validated by breakthrough experiments under continuous and dynamic conditions at 298 K.
Selective Capturing of the CO2 Emissions Utilizing Ecological (3-Mercaptopropyl)trimethoxysilane-Coated Porous Organic Polymers in Composite Materials

Mohammed G. Kotp,Shiao-Wei Kuo

DOI: https://doi.org/10.3390/polym16131759

IF: 5

2024-06-21

Polymers

Abstract:Capturing carbon dioxide (CO2) is still a major obstacle in the fight against climate change and the reduction of greenhouse gas emissions. To address this problem, we employed a simple Friedel–Crafts alkylation to investigate the effectiveness of porous organic polymers (POPs) based on triphenylamine (TPA) and trihydroxy aryl terms derived from chloranil (CH), designated as TPA-CH POP. We then treated the TPA-CH POP with (3-mercaptopropyl)trimethoxysilane (3-MPTS), forming a TPA-CH POP-SH nanocomposite to enhance CO2 capture. Utilizing FTIR, solid-state NMR, SEM, TEM, along with XPS techniques, the molecular makeup, morphological characteristics, as well as physical features of TPA-CH POP and the TPA-CH POP-SH nanocomposite were thoroughly explored. Upon scorching to 800 °C, the TPA-CH POP-SH nanocomposite demonstrated more thermal durability over TPA-CH POP, achieving a char yield of up to 71.5 wt.%. The TPA-CH POP-SH nanocomposite displayed a 2.5-times better CO2 capture, as well as a comparable adsorption capacity of 48.07 cm3 g−1 at 273 K. Additionally, we found that the TPA-CH POP-SH nanocomposite exhibited an improved CO2/nitrogen (N2) selectivity versus the original TPA-CH POP. Typical enthalpy changes for CO2 capture were somewhat increased by the 3-MPTS coating, indicating greater binding energies between CO2 molecules and the adsorbent surface. Our outcomes demonstrate that a TPA-CH POP composite coated with MPTS is a viable candidate for effective CO2 capture uses. Our findings encourage the investigation of different functional groups and optimization strategies.

polymer science
Coordination Polymers Based on Di-9,10-(pyridine-4-yl)-anthracene: Selective Adsorption of CO2 and Fluorescent Properties

Ji-Ming Xi,Rui Zhu,Yu-Kang Teng,Qian Wu,Meng-Yuan Xu,Rui Zhang,Zhen-Zhong Lu,Ling Huang

DOI: https://doi.org/10.1039/d2ce01570f

IF: 3.756

2023-01-01

CrystEngComm

Abstract:In this study, we report four coordination polymers based on di-9,10-(pyridine-4-yl)-anthracene (dpa). 1 and 2 are similar 2-fold interpenetrating pcu networks built by Co2+, dpa and dicarboxylate ligands of different lengths, and the porosities and pore sizes of the interpenetrated frameworks were adjusted. 1 contains 1D channels of a cross-section of 3.7 x 3.7 angstrom and exhibits very high selectivity in adsorbing CO2 over N-2. The channels in 2 are larger (5.1 x 5.1 angstrom) but unstable upon removing solvent guests. 3, [Cd(dpa)(2)(Cl)(2)](n)center dot 2nDMF, contains layer structures constructed by dpa, Cd2+ and Cl- atoms. 4, [Cd(dpa)(Cl)(2)(H2O)(2)](n), contains polymeric chains with Cd2+ atoms linked by dpa ligands. 3 and 4 showed strong fluorescent emissions, and mixed matrix membranes prepared based on 3 or 4 showed very high sensitivity and selectivity for detecting Cr2O72- in water.
Engineering Porous Organic Polymers for Carbon Dioxide Capture

Ning Huang,Gregory Day,Xinyu Yang,Hannah Drake,Hong-Cai Zhou

DOI: https://doi.org/10.1007/s11426-017-9084-7

2017-01-01

Science China Chemistry

Abstract:As atmospheric CO 2 levels rise, the development of physical or chemical adsorbents for CO 2 capture and separation is of great importance on the way towards a sustainable low-carbon future. Porous organic polymers are promising candidates for CO 2 capture materials owing to their structural flexibility, high surface area, and high stability. In this review, we highlight high-performance porous organic polymers for CO 2 capture and summarize the strategies to enhance CO 2 uptake and selectivity, such as increasing surface area, increasing interaction between porous organic polymers and CO 2 , and pore surface functionalization.
Synthetic Control of the Polar Units in Poly(thiophene Carbazole) Porous Networks for Effective CO2 Capture

Chan Yao,Di Cui,Yiang Zhu,Wei Xie,Shuran Zhang,Guangjuan Xu,Yanhong Xu

DOI: https://doi.org/10.1039/c9nj00688e

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:Herein we present a rational strategy for the design of a porous organic structure based on conjugated microporous polymers (CMPs), aiming for the super absorption of CO2.
MOF-derived bimetallic coordination polymer@cobalt-aluminum layered double hydroxide for highly selective CO2 adsorption: Experiments, mechanisms

Zhen Huang,Liangri Ying,Fengchun Gong,Shule Liu,Weilong Wang,Jing Ding

DOI: https://doi.org/10.1016/j.jcis.2023.05.039

Abstract:Selective capture of CO2 is one of the most effective strategies for combating the greenhouse effect. In this study, we report the synthesis of a novel adsorbent-an amine-based cobalt-aluminum layered hydroxide with a hafnium/titanium metal coordination polymer (denoted as Co-Al-LDH@Hf/Ti-MCP-AS)-through the derivatization of metal-organic frameworks (MOFs) for selective CO2 adsorption and separation. Co-Al-LDH@Hf/Ti-MCP-AS achieved the maximum CO2 adsorption capacity of 2.57 mmol g-1 at 25 °C and 0.1 MPa. The adsorption behavior followed the pseudo-second-order kinetics and Freundlich isotherm models, indicating that chemisorption occurs on a non-homogeneous surface. Co-Al-LDH@Hf/Ti-MCP-AS also exhibited selective CO2 adsorption in CO2/N2 and excellent stability over six adsorption-desorption cycles. An in-depth analysis of the adsorption mechanism through X-ray photoelectron spectroscopy and density-functional theory and frontier molecular orbital calculations revealed that adsorption occurs through acid-base interactions between amine functional groups and CO2 and that the tertiary amines (N3) have the highest affinity toward CO2. Our study provides a novel strategy for designing high-performance adsorbents for CO2 adsorption and separation.
Synthetic control of the polar units in poly(thiophene carbazole) porous networks for effective CO<sub>2</sub> capture

Chan Yao,Di Cui,Yiang Zhu,Wei Xie,Shuran Zhang,Guangjuan Xu,Yanhong Xu

DOI: https://doi.org/10.1039/c9nj00688e

IF: 3.3

2019-01-01

New Journal of Chemistry

Abstract:Herein we present a rational strategy for the design of a porous organic structure based on conjugated microporous polymers (CMPs), aiming for the super absorption of CO2.
Tunable Gas Adsorption Properties of Porous Coordination Polymers by Modification of Macrocyclic Metallic Tectons

Xiang Jiang,Kong-Qiu Hu,Hui-Zhong Kou

DOI: https://doi.org/10.1039/c5ce01577d

IF: 3.756

2015-01-01

CrystEngComm

Abstract:By using the semi-rigid ligand tetrakis[4-(carboxyphenyl)oxamethyl]methane acid (H4TCM) and various macrocyclic metallic tectons, eight new Ni(II) coordination polymers, namely, [(NiL1)2(TCM)]·17H2O (1), [(NiL2)2(TCM)]·17H2O (2), [(NiL3)2(TCM)]·18H2O (3), [(NiL4)2(TCM)]·4DMF·10H2O (4), [(NiL5)2(TCM)]·4DMF·9H2O (5), [(NiL6)2(TCM)]·20H2O (6), [(NiL7)2(TCM)]·18H2O (7), [(NiL8)2(TCM)]·4H2O (8) (L1 = 1,8-dimethyl-1,3,6,8,10,13-hexaaza-cyclotetradecane, L2 = 1,3,6,9,11,14-hexaaza-tricyclooctadecane, L3 = 1,3,6,10,12,15-hexaaza-tricycloeicosane, L4 = 1,3,6,8,11,14-hexaaza-tricyclooctadecane, L5 = 4-methyl-1,3,6,8,11,14-hexaaza-tricyclooctadecane, L6 = 1,3,6,8,12,15-hexaaza-tricycloeicosane, L7 = 11-methyl-1,4,8,10,13,15-hexaaza-tricycloicosane and L8 = 3,10-diisobutyl-1,3,5,8,10,12-hexaaza-cyclotetradecane), were synthesized and structurally characterized. Single crystal X-ray analyses reveal that compounds 1–8 exhibit a similar diamondoid (dia) topology network. Regulated by macrocyclic metallic tectons, compounds 1–3 feature a three-dimensional (3D) framework with 7-fold interpenetration, giving rise to a 1D porous channel with size of ca. 1 nm. Compounds 4–7 possess a 3D network with 2D porous channels (porous size ca. 0.5 nm) and 4-fold interpenetration. Compound 8 shows a 3D dense packing arrangement with 2-fold interpenetration. The porosity of compounds 1–7 was confirmed by N2 gas adsorption measurements at 77 K. Furthermore, due to functional groups exposed on the porous surface, activated compound 3 exhibits selective adsorption of CO2 over N2. The results show the crystal structure, stability and gas adsorption can be tuned by the modification of macrocyclic metallic tectons.
Hierarchical N-Doped Carbon As CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor.

John W. F. To,Jiajun He,Jianguo Mei,Reza Haghpanah,Zheng Chen,Tadanori Kurosawa,Shucheng Chen,Won-Gyu Bae,Lijia Pan,Jeffrey B. -H. Tok,Jennifer Wilcox,Zhenan Bao

DOI: https://doi.org/10.1021/jacs.5b11955

IF: 15

2016-01-01

Journal of the American Chemical Society

Abstract:Carbon capture and sequestration from point sources is an important component in the CO2 emission mitigation portfolio. In particular, sorbents with both high capacity and selectivity are required for reducing the cost of carbon capture. Although physisorbents have the advantage of low energy consumption for regeneration, it remains a challenge to obtain both high capacity and sufficient CO2/N2 selectivity at the same time. Here, we report the controlled synthesis of a novel N-doped hierarchical carbon that exhibits record-high Henry's law CO2/N2 selectivity among physisorptive carbons while having a high CO2 adsorption capacity. Specifically, our synthesis involves the rational design of a modified pyrrole molecule that can co-assemble with the soft Pluronic template via hydrogen bonding and electrostatic interactions to give rise to mesopores followed by carbonization. The low-temperature carbonization and activation processes allow for the development of ultrasmall pores (d < 0.5 nm) and preservation of nitrogen moieties, essential for enhanced CO2 affinity. Furthermore, our described work provides a strategy to initiate developments of rationally designed porous conjugated polymer structures and carbon-based materials for various potential applications.
Porous Frameworks Based on Carborane–Ln2(CO2)6: Architecture Influenced by Lanthanide Contraction and Selective CO2 Capture

Sheng-Li Huang,Yue-Jian Lin,Wei-Bin Yu,Guo-Xin Jin

DOI: https://doi.org/10.1002/cplu.201100083

2012-01-01

ChemPlusChem

Abstract:A series of microporous lanthanide coordination polymers containing p-dicarboxylate carborane ligand (1-8) have been synthesized from the reactions of 1,12-dihydroxycarbonyl-1,12-di-carba-closo-dodecaborane (p-CDCH2) with rare earth metals. Based on the well-known effect of lanthanide contraction, three distinct structure types were isolated: Structure type I crystallizes in the triclinic space group P1(-) with formula {[Ln(2)(p-CDC)(3)S-6]center dot chi S}(n) (S = solvent molecules, such as H2O, MeOH, and DMF), Ln = Yb3+ (1), Y3+ (2), Tb3+ (3), Gd3+ (4), Sm3+ (6) and structure type II also crystallizes in the triclinic space group P1(-) with formula {[Eu-2(p-CDC)(3)(MeOH)(2)(H2O)(4)]center dot[Eu-2(p-CDC)(3)(H2O)(4)(DMF)(2)]center dot 2DMF}(n) (5). Nevertheless, structure type III crystallizes in the monoclinic space group P21/n with formula {[Ln(2)(p-CDC)(3)(MeOH)(4)(DMF)(2)]center dot 2 MeOH}(n), Ln = Ce3+ (7) and La3+ (8). The structures of type I polymers consist of four-connected 2D lamellar networks, but type II and type III polymers are composed of six-connected 3D structures. Gas sorption property of compound 1' was studied, which showed selective CO2 capture over CH4 and N-2.
Achieving selective CO 2 capture and separation in crosslinked porous porphyrin-based polyimide skeletons

Kaixiang Shi,Ying Song,Tianjiao Wang,Yanfeng Wei,Shuai Zhang,Hongyan Yao,Shaowei Guan

DOI: https://doi.org/10.1016/j.micromeso.2023.112939

IF: 5.876

2023-12-11

Microporous and Mesoporous Materials

Abstract:The precise control of porous structure has always been a key factor for porous materials. We tuned the porous structures by enhancing alkynyl-groups contents and introducing metal into porphyrin ring. We used simple polymerization and alkynyl crosslinking reactions to construct crosslinked porous porphyrin-based polyimides (CR-PPBPIs) from 2,5-bis(3,4-dicarboxyphenoxy)-4 ' -phenylethynyl-biphenyl dianhydride (PEPHQDA) and 5,10,15,20-tetra[4-[(3-aminophenyl)ethynyl]phenyl] porphyrin (TAPEPP). CR-PPBPIs revealed BET surface areas (212, 578 and 593 m 2 g −1 ), dominated pore width (1 and 1.9 nm) and abundant CO 2 -philic substances. Thus, considerable CO 2 uptakes (1.92, 2.43 and 2.52 mmol g −1 ), CO 2 -adsorption isosteric enthalpies (31.9, 26.0 and 27.9 kJ mol −1 ) and superior CO 2 /N 2 selectivities (45.77, 38.72 and 46.26) were achieved. This work sheds some light on the precise regulation of porosity parameters in the crosslinked metalloporphyrin-based polyimides for carbon dioxide adsorption and separation.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology, applied
Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

Matthew J. Hurlock,Lu Lu,Akriti Sarswat,Chao-Wen Chang,Jessica M. Rimsza,David S. Sholl,Ryan P. Lively,Tina M. Nenoff

DOI: https://doi.org/10.1021/acsami.4c09811

IF: 9.5

2024-09-16

ACS Applied Materials & Interfaces

Abstract:CO(2) capture requires materials with high adsorption selectivity and an industrial ease of implementation. To address these needs, a new class of porous materials was recently developed that combines the fluidity of solvents with the porosity of solids. Type 3 porous liquids (PLs) composed of solvents and metal-organic frameworks (MOFs) offer a promising alternative to current liquid carbon capture methods due to the inherent tunability of the nanoporous MOFs. However, the effects of MOF...

materials science, multidisciplinary,nanoscience & nanotechnology
Efficient and Simple Strategy to Obtain Ordered Mesoporous Carbons with Abundant Structural Base N Sites Toward CO2 Selective Capture and Catalytic Conversion

Jianjun Chen,Qin Wu,Jinxing Mi,Chi Fan,Zhen Wang,Xiaoping Chen,Guimin Wang,Zhoulan Huang,Junhua Li

DOI: https://doi.org/10.1021/acssuschemeng.1c08589

IF: 8.4

2022-01-01

ACS Sustainable Chemistry & Engineering

Abstract:To selectively capture and transform CO2based on efficient nitrogen-doped carbon materials is important for theaccomplishment of carbon neutrality in multiplefields. We develop here an advisable strategy to fast synthesize nitrogen-dopedordered mesoporous carbons (N-OMCs) using phenolic resin and dicyandiamide precursors. The obtained N-OMCs exhibit a largeBET surface area (483-661 m2/g) and ordered mesoporosity with abundant nitrogen sites and structural defects. As expected, thesynthesized N-OMCs show impressive capacity for the capture of CO2(up to 5.46 mmol/g at 0 degrees C and 1.0 bar) and displaysatisfactory CO2/N2(0.15/0.85) selectivity (54.3-69.6 at 0 degrees C and 61.5-91.3 at 25 degrees C). More importantly, they are also muchactive in catalytic cycloaddition of CO2to propylene oxide when functionalized with metal (Co or Zn) species. This work gives anew protocol to design N-OMCs through a fast and environmentally friendly route toward the capture and conversion of CO2,which contributes well to the development of sustainable chemistry and engineering.
Triptycene based microporous hypercrosslinked polymer with amino functionality for selective CO2 capture

Mosim Ansari,Aasif Helal,Mahmoud Mohamed Abdelnaby,Abbas Saeed Hakeem,Mohd Yusuf Khan

DOI: https://doi.org/10.1002/app.56383

IF: 3

2024-10-11

Journal of Applied Polymer Science

Abstract:An‐amino functionalized microporous polymer, with abundant micropores (Vmic = 0.359 cm3 g−1) and higher BET‐specific surface area of 866 m2/g, shows a promising CO2 uptake of 1.86 mmol/g at 273 K and 1.23 at 298 K and 1 bar. The polymer with CO2‐philic NH2 groups can selectively capture CO2 over N2 and CH4. The increasing CO2 concentration in the atmosphere contributes significantly to global warming, necessitating effective capture techniques. Though amine‐based solvents are commonly used, they have drawbacks like high energy consumption and corrosion. Physical adsorption using microporous sorbents with polar groups emerges as a promising alternative, offering high efficiency and selectivity for CO2 capture. This work presents the design of a new microporous hypercrosslinked polymer with amino groups derived from the 3D molecular building block triptycene (TBMP‐NH2), for CO2 capture applications. The triptycene unit in the polymer backbone provides high surface area, thermal stability, and microporosity. TBMP‐NH2 demonstrates excellent thermal stability (Td > 350°C), considerable microporosity, and a high BET‐specific surface area of 866 m2/g, making it a promising microporous adsorbent. It exhibits a high CO2 adsorption capacity of 1.86 mmol/g at 273 K and 1.23 mmol/g at 298 K, with a Qst value of 33.95 kJ/mol, indicating a physisorption mechanism where the micropore volume (Vmic = 0.359 cm3/g) plays a crucial role. TBMP‐NH2 displays good CO2/N2 and CO2/CH4 selectivity, outperforming several reported porous polymers. Owing to its high physiochemical and thermal properties, and efficient and selective CO2 capture ability, TBMP‐NH2 can be considered a promising material for CO2 capture and environmental remediation application.

polymer science
High And Selective Co2 Capture By Two Mesoporous Acylamide-Functionalized Rht-Type Metal-Organic Frameworks

Baishu Zheng,Zhen Yang,Junfeng Bai,Yizhi Li,Shuhua Li

DOI: https://doi.org/10.1039/c2cc17593b

IF: 4.9

2012-01-01

Chemical Communications

Abstract:Two mesoporous and flexible acylamide-functionalized rht-type MOFs exhibit not only high excess unsaturation CO2 uptake (157 wt%) at 20 bar and 273 K, but also good selectivity of CO2/CH4 (8.6) and CO2/N-2 (34.3). The advantages of acylamide groups for CO2 capture have been further confirmed by GCMC and first-principles calculations.
N-doped carbon nanospheres synthesized from a newly designed eco-friendly sustainable polymer for highly selective CO2 capture

Atakan Toprak,Baki Hazer

DOI: https://doi.org/10.1007/s11356-024-35152-2

IF: 5.8

2024-09-27

Environmental Science and Pollution Research

Abstract:N-doped carbon nanospheres and porous carbon were produced by a hydrothermal template and the activation of hexamethylenetetramine (HMTA as a nitrogen source and activator) and ZnCl 2 (only as an activator) from a poly(Ri-S-ε-CL-PDMS) multiblock/graft copolymer produced using a renewable resource and eco-friendly autoxidation. N-doped carbon nanospheres (PPiSiHMTA) exhibited excellent CO 2 adsorption (2.73 mmol/g at 0 °C and 0.15 atm, 1.72 mmol/g at 25 °C and 0.15 atm) and CO 2 /N 2 selectivity (344–512). Despite the higher BET surface area and pore volume, porous carbon (PPiSi) showed low CO 2 adsorption (1.21 and 0.71 mmol/g, 0.15 atm) and CO 2 /N 2 selectivity (57 and 112). PPiSiHMTA and PPiSi have low isosteric heats of adsorption (Qst, 18–33 kJ/mol) and stability in humid environments. In addition, PPiSiHMTA exhibited an excellent CO 2 recycling performance. The experimental data on CO2 adsorption was evaluated using various isotherm models, including Freundlich, Langmuir, Sips, and Temkin. The results demonstrated a nearly perfect fit between the Freundlich isotherm and the experimental data, indicating the heterogeneous nature of the adsorbent surfaces. Our study is promising for industrial applications, offering excellent CO 2 adsorption, CO 2 /N 2 selectivity, moisture stability, and porous material fabrication strategies.

environmental sciences
Covalent Organic Frameworks for Simultaneous CO2 Capture and Selective Catalytic Transformation

Yaling Li,Jianqiang Zhang,Kaiming Zuo,Zhongping Li,Yu Wang,Hui Hu,Chaoyuan Zeng,Huanjun Xu,Baoshan Wang,Yanan Gao

DOI: https://doi.org/10.3390/catal11091133

IF: 3.9

2021-09-21

Catalysts

Abstract:Combination of capture and simultaneous conversion of CO2 into valuable chemicals is a fascinating strategy for reducing CO2 emissions. Therefore, searching for heterogeneous catalysts for efficient catalytic conversion of CO2 is of great importance for carbon capture and utilization. Herein, we report a metalloporphyrin-based covalent organic framework (Co(II)@TA-TF COF) that can capture CO2 and simultaneously convert it into cyclic carbonates under mild conditions. The COF was designed to possess micropores for the adsorption of CO2 and integrated with cobalt(II) porphyrin (Co(II)@TAPP) units as catalytic sites into the vertices of the layered tetragonal networks. The structure of the Co(II)@TA-TF COF is unique where Co(II)@TAPP units are alternately stacked along the z direction with a slipped distance of 1.7 Å, which gives an accessible space to accommodate small molecules, making it possible to expose catalytic sites to substrates within the adjacent stacked layers. As a result, this COF is found to be highly effective for the addition of CO2 and epoxides. Importantly, the Co(II)@TA-TF COF exhibited a dramatic size selectivity for substrates. In conjunction with its reusability, our results highlight the development of a new function of COFs for targeting simultaneous CO2 absorption and utilization upon complementary exploration of the structural features of skeletons and pores. Such promising catalytic performance of the COF makes it possible for its potential practical application.

chemistry, physical
Discrepant Gas Adsorption in Isostructural Heterometallic Coordination Polymers: Strong Dependence of Metal Identity

Sheng-Li Huang,Long Zhang,Yue-Jian Lin,Guo-Xin Jin

DOI: https://doi.org/10.1039/c2ce26072g

IF: 3.756

2013-01-01

CrystEngComm

Abstract:Two isostructural porous 3d-4d materials [M(cyclam)Pd(2,4-pydc)(2)center dot 4H(2)O](n) (2,4-H(2)pydc = pyridine-2,4-dicarboxylate acid) (1, M = Ni and 2, M = Zn) and five other isostructural complexes {[M'(cyclam)](2)[M(2,5-pydc)(3)]center dot xH(2)O}(n) (2,5-H(2)pydc = pyridine-2,5-dicarboxylate acid) (3, M = Co, M' = Ni; 4, M = M' = Ni; 5, M = Zn, M' = Ni; 6, M = Ni, M' = Zn and 7, M = M' = Zn) were synthesized. Both complexes 1' and 2' show high selective CO2 capture over CH4 and N-2. The comparisons of different gas sorption properties between 1' and 2' strongly suggest that metal identity has a great influence on the polarity of frameworks, but just the polar molecules respond to the polarity changes of different frameworks. The comparisons of CO2 sorption properties between five other isostructural complexes 3'-7' also strongly suggest that metal identity has great influence on polarity of frameworks and further the CO2 uptake.

Selective CO2 Capture by a 3d–4d Coordination Polymer Material with 1D Channel

Combined CO2-philicity and Ordered Mesoporosity for Highly Selective CO2 Capture at High Temperatures

Synthesis and CO2 Capture Behavior of Porous Cross-Linked Polymers Containing Pendant Triazole Groups

Interplay of Tri- and Bidentate Linkers to Evolve Micropore Environment in a Family of Quasi-3D and 3D Porous Coordination Polymers for Highly Selective CO2 Capture.

Selective Capturing of the CO2 Emissions Utilizing Ecological (3-Mercaptopropyl)trimethoxysilane-Coated Porous Organic Polymers in Composite Materials

Coordination Polymers Based on Di-9,10-(pyridine-4-yl)-anthracene: Selective Adsorption of CO2 and Fluorescent Properties

Engineering Porous Organic Polymers for Carbon Dioxide Capture

Synthetic Control of the Polar Units in Poly(thiophene Carbazole) Porous Networks for Effective CO2 Capture

MOF-derived bimetallic coordination polymer@cobalt-aluminum layered double hydroxide for highly selective CO2 adsorption: Experiments, mechanisms

Synthetic control of the polar units in poly(thiophene carbazole) porous networks for effective CO<sub>2</sub> capture

Tunable Gas Adsorption Properties of Porous Coordination Polymers by Modification of Macrocyclic Metallic Tectons

Hierarchical N-Doped Carbon As CO2 Adsorbent with High CO2 Selectivity from Rationally Designed Polypyrrole Precursor.

Porous Frameworks Based on Carborane–Ln2(CO2)6: Architecture Influenced by Lanthanide Contraction and Selective CO2 Capture

Achieving selective CO 2 capture and separation in crosslinked porous porphyrin-based polyimide skeletons

Exploitation of Pore Structure for Increased CO 2 Selectivity in Type 3 Porous Liquids

Efficient and Simple Strategy to Obtain Ordered Mesoporous Carbons with Abundant Structural Base N Sites Toward CO2 Selective Capture and Catalytic Conversion

Triptycene based microporous hypercrosslinked polymer with amino functionality for selective CO2 capture

High And Selective Co2 Capture By Two Mesoporous Acylamide-Functionalized Rht-Type Metal-Organic Frameworks

N-doped carbon nanospheres synthesized from a newly designed eco-friendly sustainable polymer for highly selective CO2 capture

Covalent Organic Frameworks for Simultaneous CO2 Capture and Selective Catalytic Transformation

Discrepant Gas Adsorption in Isostructural Heterometallic Coordination Polymers: Strong Dependence of Metal Identity