Abstract:This study tried to use electroflocculating precipitated waste to prepare a Si@Al adsorbent by simply mixing sodium silicate at a mass ratio of 4:1 and calcining at 200 °C for 2 h. The adsorbent was low cost, high efficiency, and could remove a variety of contaminants (organic pollutants, antibiotics, and metal ions) from water. In this study, adsorbent characterization and pollutant adsorption experiments were carried out. The results showed that: Si@Al adsorbent had uniform particles, distinct layers, a loose porous appearance, and the internal structure was scattered without a crystal structure. The optimal adsorption conditions for tetracycline were as follows: dosage of adsorbent 2.0 g/L, reaction time 10 min, pH = 4.5, and tetracycline removal rate of 97.13%. The optimal adsorption conditions for MB (MB stands for methylene blue) were an adsorption dosage of 4.0 g/L, a reaction time of 15 min, pH = 4.5–8.5, and a removal rate of 96.39%. The optimal adsorption conditions for Cu were a 2.0 g/L dosage of adsorbent, a reaction time of 30 min, a pH of 8.5, and a highest removal rate of 97.47%. It was worth noting that the effect of temperature on TC, MB and Cu was not significant. At the same time, the kinetic fitting results showed that the adsorption of MB was more consistent with the quasi-second-order kinetic model, with R2 ranging from 0.9788 to 1.0000. The adsorption of TC and Cu was more consistent with the quasi-first-order kinetic model, with R2 ranging from 0.9598 to 0.9999 and 0.9844 to 0.9988, respectively. According to the results of thermodynamics, kinetics and zero potential point, the adsorption of tetracycline and methylene blue was mainly a physical adsorption, multilayer heterogeneous or single-layer homogeneous adsorption process. The adsorption of Cu was categorized as multi-layer heterogeneous chemical adsorption. The co-existing substances had little effect on the properties of the adsorbent, and the adsorbent could be recycled 5 times. Compared with other adsorbents, the results showed that the adsorbents had obvious advantages in terms of the raw material source, preparation method, time cost and removal effect. This study provided a “waste into treasure, green and efficient” multi-pollutant adsorption method.

Cooperative adsorbent based on mesoporous SiO2 for organic pollutants in water

Rapid, Complete Removal Of Organic Pollutants From Water By A Sns2-Modified Porous -Cyclodextrin-Containing Polymer

The cooperative adsorption properties of cetyl/amino-SBA-15 for 4-nonylphenol.

Adsorption Properties of Mesoporous Silicas for Organic Pollutants in Water

Synthesis of Cyclodextrin-based Adsorbents and Its Application for Organic Pollutant Removal from Water

Intelligent Mesoporous Materials for Selective Adsorption and Mechanical Release of Organic Pollutants from Water

Cooperative Pollutant Adsorption and Persulfate-Driven Oxidation on Hierarchically-Ordered Porous Carbon.

Organosilica copolymers for the adsorption and separation of multiple pollutants.

Mesoporous Silicas Functionalized with A High Density of Carboxylate Groups As Efficient Absorbents for the Removal of Basic Dyestuffs

Biomass-derived N/S dual-doped hierarchically porous carbon material as effective adsorbent for the removal of bisphenol F and bisphenol S

High performance adsorbents based on hierarchically porous silica for purifying multicomponent wastewater

Fabrication of SiO2 modified biobased hydrolyzed hollow polymer particles and their applications as a removal of methyl orange dye and bisphenol-A

Synthesis of Mesoporous Silica-Carbon Microspheres Via Self-Assembly and In-Situ Carbonization for Efficient Adsorption of Di-n-butyl Phthalate

A Review of the Adsorption of Organic Pollutants on Mesoporous Carbons and Carbon/silica Hybrids

Surface Functionalized Mesoporous Silicas As Adsorbents For Aromatic Contaminants In Aqueous Solution

Pore Surface Engineering of Covalent Organic Frameworks by Simultaneously Appending Amine Group and Tailoring Pore Size for Efficient Adsorption of Diclofenac Sodium

Biomimetic surface functionalization of SiO2 microspheres with catecholamine-containing poly(itaconic acid) for removal of cationic dye

Preparation And Characterization Of Organic-Functionalized Mesoporous Silica As Heavy Metal Adsorbents

Preparation and Application of Si@Al Adsorbents for Different Pollutants Removal from Aqueous Solution

Post-crosslinking of conjugated microporous polymers using vinyl polyhedral oligomeric silsesquioxane for enhancing surface areas and organic micropollutants removal performance from water

Synthesis of Mixed-Mode Based Functionalized Mesoporous Silica Through RAFT Polymerization and Its Application for Dye Adsorption