Abstract:Molybdenum disulfide (MoS2) is a promising anode material for lithium-ion batteries (LIBs) due to its distinctive graphene-like structure and high specific capacity. However, its commercial application is hindered by the severe volume expansion during lithiation/delithiation and poor conductivity. In this paper, we report a facile one-pot enhanced hydrothermal synthesis strategy to prepare high-performance MoS2/C composite materials. The results indicate that the as-prepared MoS2/C composite is a subspheroidal core–shell structure material, with uniform coating, good particle dispersion, and an average grain size of approximately 80 nm. The morphology of the composite remained unchanged even after annealing at 500 °C for 2 h. The addition of glucose can accelerate the nucleation and growth of MoS2, and higher hydrothermal temperatures can improve the product yield. The addition of PVP has little effect on the yield, but significantly reduces the particle size. The XPS analysis reveals that the MoO3 may be generated as an intermediate product during the hydrothermal process. The electrochemical test results show that the unannealed MoS2/C samples exhibit discharge-specific capacities of 705.2 mAh·g−1 and 625.7 mAh·g−1 after the first cycle and the 100th cycle, respectively, at a current density of 500 mA·g−1, with a capacity retention rate of 88.7%. In contrast, the specific capacity of the MoS2/C specimens after annealing at 500 °C for 2 h shows a tendency to decrease and then slowly increase during the cycles, and the discharge specific capacity is 582.3 mAh·g−1 after the 100th cycle, which is lower than that of the unheated sample. The impedance analysis reveals that the lithium-ion diffusion coefficient of the MoS2/C material without calcination is 2.11 × 10−18 cm·s−2, which is superior to that of the annealed MoS2/C and pristine MoS2 samples. This characteristic is favorable for lithiation/delithiation during the charge/discharge process.

Single-Layer Mos2/Graphene Dispersed in Amorphous Carbon: Towards High Electrochemical Performances in Rechargeable Lithium Ion Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

Graphene-like MoS2/amorphous carbon composites with high capacity and excellent stability as anode materials for lithium ion batteries

L-Cysteine-assisted Synthesis of Layered MoS2/Graphene Composites with Excellent Electrochemical Performances for Lithium Ion Batteries

CTAB-assisted Synthesis of Single-Layer MoS2–graphene Composites As Anode Materials of Li-ion Batteries

Mo-Doped SnO2 Nanoparticles Embedded in Ultrathin Graphite Nanosheets as a High-Reversible-Capacity, Superior-Rate, and Long-Cycle-Life Anode Material for Lithium-Ion Batteries

MoS2/graphene Nanocomposite with Enlarged Interlayer Distance As a High Performance Anode Material for Lithium-Ion Battery

Interlayer-expanded MoS2/graphene Composites As Anode Materials for High-Performance Lithium-Ion Batteries

3d Composites Of Layered Mos2 And Graphene Nanoribbons For High Performance Lithium-Ion Battery Anodes

Facile Synthesis of A Mos2 and Functionalized Graphene Heterostructure for Enhanced Lithium-Storage Performance

A novel MoS2/C nanocomposite as an anode material for lithium-ion batteries

Facile Synthesis of Molybdenum Disulfide Nanosheets/Nitrogen-Doped Porous Carbon Composites for High-Performance Anode Material in Lithium-Ion Batteries

One-Pot Hydrothermal Synthesis and Electrochemical Performance of Subspheroidal Core–Shell Structure MoS2/C Composite as Anode Material for Lithium-Ion Batteries

Synthesis of Few-Layer Mos2-Graphene Composites with Superior Electrochemical Lithium-Storage Performance by an Ionic-Liquid-Mediated Hydrothermal Route

Monodisperse MoS2/Graphite Composite Anode Materials for Advanced Lithium Ion Batteries

In situ synthesis of MoS2/graphene nanosheet composites with extraordinarily high electrochemical performance for lithium ion batteries.

Thermal Decomposition-Reduced Layer-by-layer Nitrogen-Doped Graphene/mos2/nitrogen-Doped Graphene Heterostructure for Promising Lithium-Ion Batteries

Constructing MoS 2 /CoMo 2 S 4 /Co 3 S 4 nanostructures supported by graphene layers as the anode for lithium-ion batteries.

Cationic Surfactant-Assisted Hydrothermal Synthesis of Few-Layer Molybdenum Disulfide/Graphene Composites: Microstructure and Electrochemical Lithium Storage

Integrated 3d Porous C-Mos2/Nitrogen-Doped Graphene Electrode for High Capacity and Prolonged Stability Lithium Storage

N-Doped Graphene/Porous G-C3n4 Nanosheets Supported Layered-Mos2 Hybrid As Robust Anode Materials for Lithium-Ion Batteries