Abstract:The morphology-controlled synthesis of SnO2 hollow/nanoporous nanostructures (nanotubes, urchin-like morphologies and nanospheres) was achieved via a template-engaged replacement reaction at a mild temperature (lower than 80 degrees C). The formation mechanism of hollow interior and nanoporous walls for the obtained SnO2 nanostructures (SnO2 nanotubes were used as an example) was investigated based on TEM and HRTEM observations during different reaction stages. It is found that bridge voids firstly form at the MnO2/SnO2 interface, followed by the inward development of voids before the MnO2 core is completely consumed. Two types of short-circuited galvanic cells, MnO2/Mn2+ rSnO(2)/Sn2+ and concentration cell-SnO2/Sn2+ (interior) rSnO(2)/Sn2+ (exterior), are probably responsible for the formation of SnO2 nanotubes and outward growth of SnO2 along MnO2. Moreover, the calculation result of the outer diameter of SnO2 nanotubes is in good agreement with the observation results by SEM and TEM. When evaluated as anodes for lithium ion batteries (LIBs), the three SnO2 nanostructures exhibit superior rate capability and cycling performance. Especially, SnO2 nanotubes present the best rate capability: specific capacities of above 800 mA h g(-1) at 200 mA g(-1) and about 500 mA h g(-1) at 4000 mA g(-1) were achieved, respectively. Importantly, the 1D morphology of SnO2 nanotubes can be well preserved after prolonged cycling at a relatively high current density, indicating good structural stability of the resulting nanotubes during the Li+ insertion/extraction process. These results indicate that the obtained SnO2 hollow/nanoporous nanostructures would be promising anode materials for next-generation LIBs.

Large-Scale Synthesis of SnO2 Nanotube Arrays As High-Performance Anode Materials of Li-Ion Batteries

Crystalline SnO2 @ Amorphous TiO2 Core-Shell Nanostructures for High-Performance Lithium Ion Batteries

Porous Znco2o4 Nanowires Synthesis Via Sacrificial Templates: High-Performance Anode Materials Of Li-Ion Batteries

Large-scale Synthesis of Silicon Arrays of Nanowire on Titanium Substrate As High-Performance Anode of Li-ion Batteries

Synthesis of polycrystalline SnO2 nanotubes on carbon nanotube template for anode material of lithium-ion battery

Honeycomb-inspired Design of Ultrafine SnO2@C Nanospheres Embedded in Carbon Film As Anode Materials for High Performance Lithium- and Sodium-Ion Battery

TiO 2 nanotube @ SnO 2 nanoflake core–branch arrays for lithium-ion battery anode

Solvothermal synthesis of carbon-coated tin nanorods for superior reversible lithium ion storage

Large-scale synthesis and application of SnS2–graphene nanocomposites as anode materials for lithium-ion batteries with enhanced cyclic performance and reversible capacity

Design and synthesis of Cu6Sn5-coated TiO2 nanotube arrays as anode material for lithium ion batteries

Carbon-coated SnO2 nanotubes: template-engaged synthesis and their application in lithium-ion batteries.

Highly Ordered ZnMnO3 Nanotube Arrays from a “Self-Sacrificial” ZnO Template As High-Performance Electrodes for Lithium Ion Batteries

Facile Synthesis of Sn/Tio2 Nanowire Array Composites As Superior Lithium-Ion Battery Anodes

Hierarchical SnO2 hollow nanotubes as anodes for high performance lithium-ion battery

Fabrication Of Zno@Tio2 Core-Shell Nanotube Arrays As Three-Dimensional Anode Material For Lithium Ion Batteries

Layer-by-layer assembly synthesis of ZnO/SnO2 composite nanowire arrays as high-performance anode for lithium-ion batteries

Large-scale low temperature fabrication of SnO2 hollow/nanoporous nanostructures: the template-engaged replacement reaction mechanism and high-rate lithium storage.

Self-assemble SnO2 porous nanotubes as high-performance anodes for lithium-ion batteries

Hierarchical Tubular Structures Constructed by Carbon‐Coated SnO2 Nanoplates for Highly Reversible Lithium Storage

Preparation of Nanowire Arrays of Amorphous Carbon Nanotube-Coated Single Crystal SnO<sub>2</sub>

Hydrothermal Synthesis of Sno2 and Sno2@C Nanorods and Their Application As Anode Materials in Lithium-Ion Batteries