Abstract:Introduction Capacitive deionization (CDI), which is ion electrosorption onto the surface of porous materials to remove ions from aqueous solutions, may serve as an energy-efficient alternative for the desalination of brackish water comparing with conventional desalination methods such as membrane separation and thermal distillation [1]. The CDI process operates at low direct voltages. Ions adsorbed are hold in the electrical double layers (EDL) near charged surface of an electrode and could be released back into bulk solution by canceling the potential difference between the electrodes [1]. No additional chemicals are required for regeneration. The part of discharging energy is able to be restored for the energy recycling. A prerequisite for the high deionization efficiency of CDI method is the demand for the high electrosorptive capacity endowed by the electrode materials. To obtain the objective, it is important that a large surface area is created and thus typical materials such as high specific surface area (SSA) materials are used. High SSA, a key factor of electrosorptive capacity, is determined mainly by the contribution of the surface area of mesopores and micropores present in carbon materials. SSA is explicitly related to pore size, thus it is especially important to understand its effect on electrosorptive capacity. The latest research in the related field of electric double layer capacitors (EDLC) has shown an anomalous increase in carbon capacitance at pore sizes less than 1 nm [2]. In CDI, the pore openings of activated carbons were controllably tuned to exhibit excellent electrochemical selectivity for ions [3]. Electrosorptive performance with modified activated carbon cloth as CDI electrodes was also investigated [4]. Up to now, more emphasis is focused on high SSA of porous carbon materials with the order of 10 m/g. Activated carbon fibers (ACFs) are typical microporous materials with large surface areas and good conductivity along fiber axis. Thus they can serve as candidate for active component of CDI electrodes. The aim in present work is to identify effect of SSA on capacitive electrosorptive capacity using activated carbon materials electrodes.

Comparative Electroadsorption Study of Mesoporous Carbon Electrodes with Various Pore Structures

Electrosorption Capacitance of Nanostructured Carbon-Based Materials

Studies Of Activated Carbon Electrodes For Capacitive Seawater Desalination

Improving the Pore-Ion Size Compatibility Between Poly(ionic Liquid)-Derived Carbons and High-Voltage Electrolytes for High Energy-Power Supercapacitors

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Electrocapacitive desalination with nitrogen-doped hierarchically structured carbon prepared using a sustainable salt-template method

Highly porous activated carbon with multi-channeled structure derived from loofa sponge as a capacitive electrode material for the deionization of brackish water

Mesoporous Carbon Nanofibers for Supercapacitor Application

Preparation of nitrogen-doped hierarchical porous carbon electrodes for high performance capacitive deionization

Pseudocapacitive desalination via valence engineering with spindle-like manganese oxide/carbon composites

Electrochemical capacitive desalination behavior of activated carbon fibers

Flexible nitrogen-doped carbon nanofiber-reinforced hierarchical hollow iron oxide nanorods as a binder-free electrode for efficient capacitive deionization

Developing efficient, binder-free 3D porous Ti3C2Tx-MXene electrodes for enhanced capacitive deionization towards desalination

Selective adsorption of divalent and trivalent cations in porous electrodes

Importance of Anode/Cathode Mass Loadings on Capacitive Deionization Performance

Understanding Sorption of Aqueous Electrolytes in Porous Carbon by NMR spectroscopy

Mesopore dominated capacitive deionization of N-doped hierarchically porous carbon for water purification

Selectivity toward heavier monovalent cations of carbon ultramicropores used for capacitive deionization

Ion-doped polypyrrole coupled core-shell hierarchical porous carbon electrode material with high desalination capacity for capacitive deionization

Wrinkled hierarchical porous carbon spheres with interconnected multi-cavity for ultrahigh capacitive deionization

Fe-N and Fe-P dual active centers in MOF-derived carbon electrode for efficient capacitive deionization: Abundant defects and superior electrochemical properties