Abstract:Over the past several decades, trace heavy metal ion pollution, such as Cd(II), Cu(II), Pd(IV), etc., have attracted much attention because of their virulent and hard degradation properties. Recently, great efforts have been devoted to establish new methods and technologies to removal toxic metals. Among them, activated carbon adsorption, especially the modified activated carbon technology has been extensively studied due to its feasibility, such as, the low-cost of activated carbon, the recovery of the activated carbon. In this study, Cd(II) was chosen as the target heavy metal ion to evaluate the activity of modified powdered activated carbon(PAC) and commercial available tannic acid(TA), a kind of Chinese gallotannin with molecular weight 1701, was employed in the modification of the surface properties of PAC. Optimum experimental parameters such as pH, contact time, initial concentration of TA and adsorption capacity for tannic acid immobilisation onto PAC and Cd(II) adsorption on tannic acid-powdered activated carbon combination were determined , respectively. Adsorption of Cd(II) on PAC alone was also determined to compare the experimental results. The adsorption capacity for tannic acid immobilisation onto PAC was analysed by the solution absorbance variation of maximal ultraviolet absorption peak at 276 nm, and the concentration of Cd(II) in the solution was measured through AAS and ICP-AES. Specific surface area, pHpzc and surface functional groups of PAC and TA-PAC combination were determined by BET, powder addition method and Boehm titration method, respectively, to study on the adsorption mechanism of Cd(II) on modified surface. Results showed that TA was effective to enhance the metal adsorption capacity of PAC surfaces and the modified PAC got the maximal Cd(II) adsorption capacity with 25 gram tannic acid immobilised per gram PAC at the optimum immobilization pH value 3.5, at room temperature 18°C . The polyphenol structure of TA immobilised o- - n PAC surfaces may contribute to the changes of adsorption capacity. Neither of the Langmuir isotherm equation and Freundlich isotherm equation was found to provide reasonable well fit for the TA-PAC and Cd(II)-TA-PAC combinations.

Adsorption of Pb 2+ and Cd 2+ onto a Novel Activated Carbon-Chitosan Complex

Preparation of Cotton-Based Fibrous Adsorbents for the Removal of Heavy Metal Ions.

Pectin/Activated Carbon-Based Porous Microsphere for Pb2+ Adsorption: Characterization and Adsorption Behaviour

Effective Adsorption Ag(I) Onto Triethylenetetramine-Modified Chitosan Beads: Adsorption Equilibrium, Kinetic, and Thermodynamic Studies

Adsorption of Cd~(2+) and Pb~(2+) by Chitosan

Study on Sewage Sludge-based Activated Carbons with Natural Mineral Modification for Enhanced Removal of Heavy Metal Ions from Aqueous Solution

Fast and Effective Removal of Cadmium Ion from Water Using Chitosan Encapsulated Magnetic Fe 3 O 4 Nanoparticles

Comparative Study on the Adsorption Characteristics of Heavy Metal Ions by Activated Carbon and Selected Natural Adsorbents

Removal of Copper and Lead from Aqueous Solution by Adsorption Onto Cross-Linked Chitosan/Montmorillonite Nanocomposites in the Presence of Hydroxyl–Aluminum Oligomeric Cations: Equilibrium, Kinetic, and Thermodynamic Studies

Heavy metal ions removal from aqueous solution by xanthate-modified cross-linked magnetic chitosan/poly(vinyl alcohol) particles

Adsorption of Pb(II) and Cd(II) by magnetic activated carbon and its mechanism

Chitosan cross-linked and grafted with epichlorohydrin and 2,4-dichlorobenzaldehyde as an efficient adsorbent for removal of Pb(II) ions from aqueous solution

Adsorption of Pb(II) in water by modified chitosan-based microspheres and the study of mechanism

Adsorptive Removal of Pb(II) by Magnetic Activated Carbon Incorporated with Amino Groups from Aqueous Solutions

Study on the Adsorption Mechanism of Activated Carbon Removing Low Concentrations of Heavy Metals

Low-temperature aerobic carbonization and activation of cellulosic materials for Pb2+ removal in water source

Highly efficient and selective capture of heavy metals by poly(acrylic acid) grafted chitosan and biochar composite for wastewater treatment

Optimization of preparation parameters for environmentally friendly attapulgite functionalized by chitosan and its adsorption properties for Cd2+

Single and Binary Adsorption Behaviour and Mechanisms of Cd2+, Cu2+ and Ni2+ onto Modified Biochar in Aqueous Solutions

Novel chitosan-modified biochar prepared from a Chinese herb residue for multiple heavy metals removal: Characterization, performance and mechanism

The Enhancement of Cd(II) Adsorption by Immobilsation of Tannic Acid onto Powdered Activated Carbon