Abstract:Poly(styrene-co-maleic anhydride)s (SMAs) with different compositions and molecular weight were synthesized through the reversible addition–fragmentation chain transfer polymerization technique. SMAs were converted to poly(styrene-co-octadecyl maleimide)s (SNODMIs) by amidation with octadecyl amine and subsequent imidization. SNODMIs with octadecyl branches were evaluated as flow improvers in the model crude oil with a high content of asphaltenes. The effects of molecular structures, including molecular weight, branch content, and imidization degree, on the effectiveness of SNODMI in reducing the viscosity and yield stress and improving the morphologies of asphaltene particles were thoroughly investigated using a rotational rheometer with parallel plate geometry and a polarizing microscope with a hot stage, respectively. It has been found that efficacy of SNODMI in reducing the viscosity and yield stress of the model crude oil increases with an increasing branch content of SNODMI. (alt)SNODMI with the highest branch content, approximately 45 mol %, achieved the best performance. Too high or too low molecular weight is not beneficial for SNODMI to improve the flow ability of the model crude oil. The appropriate molecular weight (Mn = 3500 Da) is required to achieve the optimal effectiveness. The optimal imidization degree of SNODMI is 100% and is independent of the branch content. The addition of SNODMI in a real crude oil has reduced the viscosity and yield stress by more than 90%.This article has not yet been cited by other publications.

Synthesis Of Poly(Maleic Acid Alkylamide-Co-Alpha-Olefin-Co-Styrene) And Their Effect On Flow Ability Of Oils

Synthesis of Poly(maleic Acid Alkylamide-Co-α-olefin-co-styrene) and Their Effect on Flow Ability of Oils

Effect of Comb-type Copolymers on the Flow Ability of Oils

Synthesis of Poly(maleic Acid Alkylamide-Co-α-olefin-co-styrene) Co-polymers and Their Effect on the Yield Stress and Morphology of Waxy Gels with Asphaltenes

Synthesis of Comb‐type Copolymers with Various Pendants and Their Effect on the Complex Rheological Behaviors of Waxy Oils

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

How Comb-Type Poly(Maleic Acid Alkylamide-Co-Alpha-Olefin) Assemble In Waxy Oils And Improve Flowing Ability

Synthesis of Poly(Styrene-co-Maleic Anhydride) Fatty Acylamide and Its Effect on Crystallization and Rheological Property of High Waxy Crude Oil

Peg-Modified Maleic Anhydride And Alpha-Olefin Copolymers And Their Effect On Flowability Of Crude Oils

How comb-type poly(maleic acid alkylamide-co-α-olefin) assemble in waxy oils and improve flowing ability

Double Alkyl Chain Copolymers As Flow Improvers for Heavy Oil

Influences of the Molecular Weight and Its Distribution of Poly(Styrene-Alt-Octadecyl Maleimide) As A Flow Improver for Crude Oils

Effect of Comb-Type Copolymers with Various Pendants on Flow Ability of Heavy Crude Oil

Effect of Heteroaromatic Pendants in Comb Copolymers on Paraffin Crystallization and Cold Flow Ability of Crude Oil

Effects of Molecular Structures of Poly(styrene- co -octadecyl maleimide) as a Flow Improver for the Model Crude Oil with a Relatively High Content of Asphaltenes

Improvement of oil flowability by assembly of comb-type copolymers with paraffin and asphaltene

Study on the Influence of the Imidization Degree of Poly(styrene-co-octadecyl Maleimide) As a Flow Improver in Waxy Crude Oils with Asphaltenes

Flow Improvement of Liaohe Extraheavy Oil with Comb‐type Copolymers

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Effect of polar/nonpolar groups in comb-type copolymers on cold flowability and paraffin crystallization of waxy oils

Effect of Spacer Length Between Phenyl Pendant and Backbone in Comb Copolymers on Flow Ability of Waxy Oil with Asphaltenes