Abstract:A series of nanofibrous alumina materials with diameters of 4-6 nm and with different aspect ratios ranging from 3 to 16 were prepared. Cobalt impregnated catalysts were prepared by means of incipient wetness impregnation on alumina nanofibers while the 'rearranged' catalysts were prepared by using ultrasonication assistance to mix the fibers with the Co3O4 nanoparticles. The effects of the alumina nanofiber aspect ratios on the Co catalyst structure and performance for Fischer-Tropsch synthesis were studied. The pore size of the two series of catalysts increased as the aspect ratio of the alumina nanofiber increased. For impregnated catalysts, large Co3O4 particles were formed on the external surface of the alumina support when the aspect ratio was 3 and 5, while the crystallite sizes of Co3O4 increased from 13.3 nm to 15.6 nm with the increase of the aspect ratio from 7 to 16. The four 'rearranged' catalysts possessed similar and homogeneously dispersed Co3O4 crystallites of 9.5 nm. As expected the reduction behavior of the two series of catalysts was primarily influenced by the Co3O4 crystallite size and structure. The FT data of the two series of catalysts indicate that dispersed Co catalysts on alumina nanofibers with large aspect ratios having large inter-crystallite pores significantly improve the catalyst activity and C5+ selectivity. The FT data of the 'rearranged' catalysts strongly demonstrated that the internal mass transfer of reactants and products increased with a decrease in inter-crystallite pore size, resulting in a decrease of C5+ selectivity and C3 olefin/paraffin ratio, and an increase of CH4 selectively, while the CO consumption rate was little altered. Furthermore, catalytic stability tests showed that the alumina nanofibers with larger aspect ratios inhibited Co migration and coalescence in the matrices of the nanofibrous alumina, and this significantly enhanced the stability of the catalyst. The Cop/Al2O3-16 catalyst possessing uniformly distributed cobalt, improved reducibility and large pores is the preferred choice to generate high catalytic activity, stability and C5+ selectivity.

Iron Oxide and Alumina Nanocomposites Applied to Fischer-Tropsch Synthesis.

Novel iron-based composites as catalysts for the fischer-tropsch synthesis of lower olefins

Size-controlled Synthesis of Hematite -Fe2o3 Nanodisks Closed with (0001) Basal Facets and {11-20} Side Facets and Their Catalytic Performance for CO2 Hydrogenation

Mesoporous Iron Oxide Nanoparticle-Decorated Graphene Oxide Catalysts for Fischer–Tropsch Synthesis

Catalytic Performance of Iron Oxide Loaded on Electron-Rich Surfaces of Carbon Nitride

Revealing the activity of different iron carbides for Fischer-Tropsch synthesis

Synthesis of Iron-Carbide Nanoparticles: Identification of the Active Phase and Mechanism of Fe-Based Fischer–Tropsch Synthesis

Effective Iron Catalysts Supported on Mixed MgO-Al<sub>2</sub>O<sub>3</sub> for Fischer-Tropsch Synthesis to Olefins

One-Pot Solvothermally Synthesized MFe2O4 (M=Fe, Mn, Co, Ni) Microspheres as Catalysts for Fischer-Tropsch to Olefins

Study of the Fischer-Tropsch synthesis on nano-precipitated iron-based catalysts with different particle sizes

Nanostructured Catalyst for Fischer-Tropsch Synthesis: Nanostructured Catalyst for Fischer-Tropsch Synthesis

Iron oxide nanoparticles supported on pyrolytic graphene oxide as model catalysts for Fischer Tropsch synthesis

Nanowire Accumulated Fe2o3/Sio2 Spherical Catalyst for Fischer-Tropsch Synthesis

Fabrication of K-promoted Iron/carbon Nanotubes Composite Catalysts for the Fischer–Tropsch Synthesis of Lower Olefins

Fe5c2 Nanoparticles: A Facile Bromide-Induced Synthesis and As an Active Phase for Fischer-Tropsch Synthesis

The Effect of the Nanofibrous Al2O3 Aspect Ratio on Fischer-Tropsch Synthesis over Cobalt Catalysts.

Co3o4-Al2o3 Mesoporous Hollow Spheres As Efficient Catalyst for Fischer-Tropsch Synthesis

Novel Cobalt Catalysts Supported On Metal-Organic Frameworks Mil-53(Al) For The Fischer-Tropsch Synthesis

Synthesis of Porous Fe3 C-Based Composite Beads as Heterogeneous Oxidation Catalysts

Highly Active and Stable Carbon Nanosheets Supported Iron Oxide for Fischer‐Tropsch to Olefins Synthesis

Γ-Fe2o3 As the Precursor of Iron Based Catalyst Prepared by Solid-State Reaction at Room Temperature for Fischer-Tropsch to Olefins