Abstract:In the current study, a mixture of three distinct oil is taken as feedstock to produce hybrid biodiesel. The simplex lattice mixture design has been applied to obtain an optimum volume proportion of each oil in the mixture with improved oil mixture characteristics. In the mixture design, waste cooking oil, Ricinus communis oil, and Melia azedarach oil are taken as the input component and viscosity, cloud point, calorific value, and FFA as responses. The mixture design contains 17 test runs. The ANOVA analysis of model shows that the regression coefficient found better (close to 1) for all variables. The desirability of the mixture design reached its maximum value of 0.619 at the optimum mixture ratio (v%) of 0.6:0.2:0.2 for Waste cooking oil, Ricinus communis oil, and Melia azedarach oil, respectively. Based on the prediction model, optimized ternary oil has viscosity 132.848 mm 2 /s, cloud point −5.73°C, calorific value 38.898 MJ/kg, and FFA of 3.225%. Calcined river shell heterogeneous catalyst is used in transesterification reaction. The highest peaks 2θ° of 32.2°, 37.3°, 64.1°, and 67.3° in X-ray diffraction patter shows the formation of heterogeneous biocatalyst from river shell. A biodiesel yield of 83.20% is found using the reaction conditions: methanol oil molar ratio (9:1), catalyst dosage (5 wt %), reaction temperature (60°C), reaction time (130 min), and stirring speed (800rpm). The GC-MS test has been conducted a confirmatory test of hybrid biodiesel. Element analysis shows that the produced hybrid biodiesel satisfies ASTM D675 standard, with a carbon content of 76.018 wt% and hydrogen content of 11.435 wt%. The optimized ternary oil mixture used to produce the hybrid biodiesel is of better quality and conforms to ASTM D675/IS 15,607 standards.

The Distillation Yield and Properties of Ternary Crude Oils Blending

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Research and performance evaluation of CO2 solubilization synergist for heavy oil

ADVANCEMENTS IN QUANTIFYING MIXED OILS

Influence of temperature, residence time, and solvent/feedstock mass ratio on overall product distribution and oil products quality in ethanol liquefaction of 230 polypropylene impact copolymer

A novel scheduling strategy for crude oil blending

Full Temperature Range Study of Rice Husk Bio-Oil Distillation: Distillation Characteristics and Product Distribution

High Vacuum Distillation for Low-Sulfur Biodiesel Production: from Laboratory to Large Scale

Crude Oil Blending Schedule Problem Without Primary Oil

Techno-Economic Study of the Effect of Different Distillates and Crude Oil Diluents on the Transportation by Pipeline of Heavy Crude Oil

Synthesis and Application of a Spirocompound as Clean Viscosity-Reducer for Crude Oil

Synergistic emulsification of polyetheramine/nanofluid system as a novel viscosity reducer of acidic crude oil

Determination of Wax Deposition Rate Model of Blended Oils with Different Blending Ratios

Condition optimization of simulated bio-oil molecular distillation via response surface method

Advancing green technology: demulsifier preparation and evaluation for crude oil emulsion treatment using corn oil

Hybrid biodiesel production from optimised novel ternary oil mixture (simplex lattice mixture design) using heterogeneous river shell catalyst

Crude oil hierarchical catalytic cracking for maximizing chemicals production: Pilot-scale test, process optimization strategy, techno-economic-society-environment assessment

Process Optimization of C4 Extractive Distillation

The effect of process variables on the transesterification of refined cottonseed oil

Renewable biocrude blends boost tribological properties and maintain fuel performance of diesel

SOME IMPROVEMENTS IN THE APPLICATION OF A CRUDE DISTILLATION MODEL