Abstract:Complex multi-azeotrope and multi-boundary lead to immense challenges of solvent selection for the separation of the ternary multi-azeotrope system. In principle, integrating reactive distillation (RD) with extractive distillation (ED) is fundamental to achieve higher energy efficiencies and to reduce process expenses and environmental impacts. However, these hybrid distillation processes that can overcome the challenges have not been fully investigated. To this end, this article developed and compared the energy-saving reactive-extractive hybrid distillation processes for purification and recovery of the high-value ethyl acetate and EtOH from the wastewater containing multi-azeotrope. The proposed hybrid distillation processes include triple-column reactive-ED (TCRED), double-column reactive-ED (DCRED). In the hybrid processes, ethylene glycol (EG) and dimethyl sulfoxide (DMSO) are adopted as solvents in the ED, while ethylene oxide is introduced as reactant to perform the hydration reaction in the RD process. These separation schemes are optimized with the objective of the minimum total annual costs (TAC) via genetic algorithm procedure to obtain the optimal design parameters. Subsequently, environmental assessment indicator (CO2 emissions) is also calculated to perform the comprehensive analysis for the presented separation processes. The results demonstrate that the hybrid distillation processes coupled with RD can significantly reduce process costs as well as CO2 emissions compared to the conventional TCED process, especially for the DCRED process. The DCRED scheme with EG as solvent has the lowest TAC and CO2 emissions, with a reduction of 43.29%/35.10% TAC and 38.06%/24.73% CO2 emissions compared with the TCRED configurations with EG or DMSO as solvents, respectively. The major contributions of this work are to facilitate the future development for conceptual design of the hybrid distillation processes containing RD.

Process Optimization of C4 Extractive Distillation

Simulation and Optimization of Linear Alkylbenzenes Distillation Process

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Thermodynamic Analysis, Simulation and Optimization on Energy Savings of Ideal Internal Thermally Coupled Distillation Columns

Optimization of Internal Thermally Coupled Distillation Columns of Nonideal Mixture

Process Improvement on Separating C4 by Extractive Distillation

Optimization of post-treatment in butadiene production with ACN process

Process Optimization of Separating C4 by Extractive Distillation

Process Design and Multi-Objective Optimization of Efficient Heat Utilization Distillation Based on the Influence of Pressure and Entrainer Flow on Separation Performance

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis

Design and comprehensive analysis of a novel pressure-swing batch distillation process for the separation of a binary azeotrope with various boiling behaviors

Thermal-coupling-oriented integrated control and optimization of distillation process

Control of extractive distillation process for separating heterogenerous ternary azeotropic mixture via adjusting the solvent content

Operation Condition Optimization of Butadiene Extraction Distillation Column

Economic, Environmental, Energy, Exergy (4E) and Inherent Safety Analysis of Hybrid Extractive-Heteroazeotropic Distillation for Sustainable Treatment of Crude N-Butanol Waste Liquor

Liquid-holdup Regions Research of Novel Reactive Distillation Column for C5 Fraction Separation

Retrofit of an Industrial Solvent Recovery System: Distillation Sequence Intensification and Simulation-based Optimization

Dual-objective optimization and energy efficiency enhancement of natural decantation assisted extractive distillation process for n -butanol/isobutanol/water separation

Novel Reactive Distillation Process for Cyclohexyl Acetate Production: Design, Optimization, and Control

Molecular Property Targeting for Optimal Solvent Design in Extractive Distillation Processes

Design and comparison of energy-saving double column and triple column reactive-extractive hybrid distillation processes for ternary multi-azeotrope dehydration