Abstract:The raw materials for the industrial production of moto- and air-alkylates are isobutane and butane-butylene fractions containing in their composition a component, n-butane, which is inert for the reaction of sulfuric acid alkylation of isobutane with olefins. In accordance with the Specifications TU 0272-024-00151638-99, the content of n-butane in the isobutane fraction, depending on the grade of the fraction, is 0.7÷20% wt. Its presence reduces the useful reaction volume of the alkylation reactor, and when separating the components of the alkylation reaction mass, it is necessary to use a distillation column (debutanizer). The possibility of including an additional column in the technological scheme for removing n-butane from the composition of the fraction (respectively, isobutane concentration) before it is fed into the alkylation reactor is being considered. This is of particular importance for factions with a brand below "High Brand". The study is conducted using the Honeywell UniSim Design software system. The Peng-Robinson method was used to calculate the properties of process stream components. The theoretically optimal design of the apparatus was calculated: when using a distillation column with a pressure in the apparatus of about 400 kPa to reduce the content of n-propane in the distillate (obtained isobutane fraction) to 0.001 mol. the share will require 48 theoretical plates, the accepted reflux ratio R = 8.9, the temperatures in the condenser and reboiler are 26.88 and 47.27 °C, respectively. A computational experiment has shown that in order to achieve the practical absence of n-butane in the obtained isobutane fraction (concentration of about 0.1% wt.), it is possible to use a distillation column with the following technological modes: the number of plates is 60, the feed plate is 15, the efficiency of contact devices is 0.8; the pressure in the column is about 400 kPa, the temperature in the condenser and reboiler is Тk=28.91÷29.05 °C and Тр=46.72÷47.25 °C, respectively, reflux ratio R=20.41. This fraction also does not contain pentanes.

Optimization of post-treatment in butadiene production with ACN process

A Study on Increasing Separation Efficiency of an Industrial, Compound Distillation Column

Process Optimization of C4 Extractive Distillation

Design Optimization and Operating Pressure Effects in the Separation of Acetonitrile/methanol/water Mixture by Ternary Extractive Distillation

Activated Carbons for the Hydrothermal Upgrading of Crude Duckweed Bio-Oil

Process design and optimization of the efficient production of butyl acrylate by reactive azeotropic distillation/pervaporation using different feed ratios

Process optimization of an industrial acetic acid dehydration progress via heterogeneous azeotropic distillation

New Process for Separating Propylene and Propane by Extractive Distillation with Aqueous Acetonitrile

Process Improvement on Separating C4 by Extractive Distillation

Treatment of wastewater from acrylonitrile industries with combined processes of adsorption oxidation, nanofiltration and adsorption

Process Optimization of Separating C4 by Extractive Distillation

Progress of Acetone-Butanol Fermentation Coupled with Separation

Production of 1- butene with catalytic distillation and super precise distillation and its improvement

Optimization of the content of isobutane in the feed stream of the plant for sulfuric acid alkylation of isobutane with olefins

Process Intensification and Dynamic Control of a Vapor-Recompression-Assisted Heterogeneous Azeotropic Distillation for Separating N- butanol/Water

Efficient purification of n-butanol by thermally coupled extractive distillation with mixed entrainer

Reduction wastewater discharge in second-generation acetone-butanol-ethanol (ABE) fermentation process by adsorptive removal of organic acids toward the broth recycling system

Process design and multi-objective optimization for separation of different feed composition of acetonitrile / ethanol / water with extractive distillation by varying pressure / pervaporation

Dual-objective optimization and energy efficiency enhancement of natural decantation assisted extractive distillation process for n -butanol/isobutanol/water separation

Solvent Improvement for Separating C4 with ACN

Multi-objective optimization and control strategy for extractive distillation with dividing-wall column/pervaporation for separation of ternary azeotropes based on mechanism analysis