Abstract:In recent years, conductive polymer composites have found applications as gas sensors because of their sudden change in electric resistance of several orders of magnitude when the materials are exposed to certain solvent vapors. However, the composites having this function reported so far are mostly based on crystalline polymeric matrices, which factually sets a limit to materials selection. The present work prepares polystyrene/carbon black composites through polymerization filling and proves that the amorphous polymer composites can also serve as gas sensing materials. The composites' percolation threshold is much lower than that of the composites produced by dispersive mixing. In addition, high responsivity to some organic vapors coupled with sufficient reproducibility is acquired. The experimental data show that molecular weight and molecular weight distribution of the matrix polymer and conducting filler content exert great influence on the electrical response behavior of the composites. As a result, composites performance can be purposely tailored accordingly. Compared with the approaches of melt‐blending and solution‐blending, the current technique is characterized by many advantages, such as simplicity, low cost, and easy to be controlled. Effect of different organic solvent vapors on the electric resistance of PS/CB composites (CB content = 10.35 vol.‐%). magnified image Effect of different organic solvent vapors on the electric resistance of PS/CB composites (CB content = 10.35 vol.‐%).

Surface Modification and Vapor-Induced Response of Poly(Vinylidene Fluoride)/Carbon Black Composite Conductive Thin Films

Optoelectronic Properties of Polyvinylidene Fluoride Films Embedded with FAPbBr3 Nanocrystals Affected by Carrier Kinetics

A Novel Sensor for Organic Solvent Vapors Based on Conductive Amorphous Polymer Composites: Carbon Black/poly(butyl Methacrylate)

Conducting and Gas-Sensing Properties of CB/VGCF/PBMA Conductive Composites

Electrical Response to Organic Vapor of Conductive Composites from Amorphous Polymer/Carbon Black Prepared by Polymerization Filling

Effects of Processing on Electric Response of Carbon Black Filled Poly(methyl Methacrylate) Composites Against Organic Solvent Vapors

Percolation and Gas Sensing Behaviours of Ternary Conductive Composites: Vapour-Grown Carbon Fibres/Carbon Black/Poly(Methyl Methacrylate)

Composites of Carbon Black Functionalized with Polymers As Candidates for the Detection of Methanol Vapor

Poly(4-vinylpyridine)/carbon Black Composite As a Humidity Sensor

Analysis of Gas Sensing Behaviors of Carbon Black/waterborne Polyurethane Composites in Low Concentration Organic Vapors

A Novel Humidity Sensor Based on Carbon Black/poly(4-vinylpyridine) Nanocomposite

Exploration of Unusual Electrical Properties in Carbon Black/binary-Polymer Nanocomposites

Organic Vapour Sensor from Carbon Black Filled Amorphous Polymer Composite: Effects of Processing, Carbon Fibres and Irradiation

Effects of Temperature and Vapor Pressure on the Gas Sensing Behavior of Carbon Black Filled Polyurethane Composites

Sensing Characteristics of Carbon Black/Waterborne Polyurethane Composites in Organic Solvent Vapors

Gas Sensing Materials from Carbon Black/Poly(Methyl Methacrylate) Composites

Electrical resistance response of carbon black filled amorphous polymer composite sensors to organic vapors at low vapor concentrations

Electrical Responses and Adsorption of Conductive CB/PBMA Composites Against Organic Solvent Vapors

SWELLING AND ELECTRICAL RESPONSE OF CB/PMMA COMPOSITES IN ORGANIC SOLVENT VAPORS

Anomalous Attenuation of the Positive Temperature Coefficient of Resistivity in a Carbon-Black-filled Polymer Composite with Electrically Conductivein Situmicrofibrils

Structure evolution of conductive polymer composites revealed by solvent vapor induced time-dependent percolation