Abstract:Abstract Bulk samples of the BixSe1-x system with (x = 0, 5, and 10) were prepared using conventional melt quenching technique. Thin films were then deposited by thermal evaporation technique under high vacuum conditions from the prepared bulk samples. Effect of Bi substitution on surface morphology, electrical and optical properties of BixSe1-x thin films was studied. X-ray diffraction studies showed the formation of nanocrystalline clusters at Bi concentration x = 10. Formation of these clusters resulted in a rough surface which was confirmed by AFM measurements. The film surface was smooth, with RMS roughness of 0.0124 nm for Bi5Se95. For Bi10Se90, the RMS roughness increased to 3.93 nm indicating the formation of Bi2Se3 clusters. A simple hot probe technique showed a transition from p-type to n-type due to Bi incorporation. Charge transport mechanisms were investigated by temperature dependent DC electrical conductivity measurements in the temperature range of 209 K to 313 K. Electrical activation energy (ΔE) of the films with different Bi concentrations was found to exhibit a notable change at the p to n transition. At low temperature, the conduction was in reasonable agreement with Mott’s condition of variable range hopping. Mott parameters and the density of localized states near Fermi level were evaluated and correlated with the structural changes resulting from Bi addition. In addition, a red shift of the optical absorption edge of the films under study caused by Bi-Se substitution was observed. Slight changes in the optical parameters were observed with the γ-irradiation. Addition of Bi atoms could be used to tailor the structural, electrical and optical properties of chalcogenide materials such as junctionless photovoltaic devices.

Preparation and Characterization of Bi-doped Antimony Selenide Thin Films by Electrodeposition

Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment

Structural and Optical Properties of Electrodeposited Bi2-Xsbxse3 Thin Films

Electrodeposition and Characterization of Copper Bismuth Selenide Semiconductor Thin Films

Electrodeposition of antimony selenide thin films from aqueous acid solutions

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb2Se3 Crystals

Homogroup Bi/Sb Lattice Substitution to Enhance the Photoelectric Properties of Sb<sub>2</sub>Se<sub>3</sub> Crystals

Optical and electrical characterization of BixSe1−x thin films

Growth and characterization of CuSbSe2 thin films prepared by electrodeposition

Synthesis and Thermoelectric Properties of Bi-doped SnSe Thin Films

Samarium Addition-Mediated Simultaneous Achievement of Excellent Resistance Drift and Superior Thermal Stability in Phase-Change Compound Antimony-Selenium Thin Film

Preparation and characterization of Sb2Se3 thin films prepared by electrodeposition for photovoltaic applications

Preparation and properties of compositionally tunable Cu3Sb(Sx,Se1-x)4 thin films

Synthesis and characterization of nanostructured bismuth selenide thin films

Effects of Bismuth-Doping on the Properties of Cu(In, Al)Se-2 Thin Films Prepared by Selenization of Sputtered Stacked Precursors

Preparation and investigation of structure, optical, nonlinear optical and thermoelectric properties of Bi2Se3 thin film

Antimony-induced grain growth and properties modification of Cu(In, Al)Se2 thin films fabricated by selenization of sputtered stacked precursors

Effect of selenisation on the properties of antimony selenide thin films