Abstract:Antimony sulfide (Sb2S3) and antimony selenide (Sb2Se3) with optical bandgaps (Eg) of 1.88 eV and 1.1 eV, respectively; both crystallize in the orthorhombic structure and can produce Sb2SxSe3‐x of intermediate Eg for solar cells. We used powder sources of Sb2S3 and Sb2Se3 in different mass ratios in vacuum thermal evaporation to produce Sb2SxSe3‐x thin films of thickness, 455 nm. These films showed a systematic variation in their characteristics with x: A, Sb2S2.05Se0.95 (Eg, 1.51 eV); B, Sb2S1.71Se1.29 (1.44 eV); C, Sb2S1.24Se1.76 (1.40 eV); D, Sb2S0.64Se2.36 (1.32 eV); and E, Sb2S0.44Se2.56 (1.29 eV); in the light generated current density; and in their photoconductivity. Solar cells of SnO2:F/CdS(100nm)/Sb2SxSe3‐x(455 nm)/C‐Ag with Sb2SxSe3‐x films of compositions A – E show open circuit voltages (Voc) of 0.566 – 0.418 V; short circuit current densities of 9.65 – 31.5 mA/cm2; fill factors of 0.38 – 0.52 and conversion efficiencies (η) of 2.1 – 6.8 %. Seven series‐connected solar cells of E of 7 cm2in area produces 34.2 mW with Voc of 2.83 V and η, 4.88 %. In view of their operational stability, we discuss the material perspectives of Sb2SxSe3‐x and considerations to improve these solar cells.This article is protected by copyright. All rights reserved.

Preparation and characterization of Sb2Se3 thin films prepared by electrodeposition for photovoltaic applications

Preparation and characterization of Sb2Se3 thin films by electrodeposition and annealing treatment

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub>Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb<sub>2</sub>Se<sub>3</sub> Thin Film Prepared via Magnetron Sputtering

Structure, Morphology, and Photoelectric Performances of Te-Sb 2 Se 3 Thin Film Prepared via Magnetron Sputtering.

Growth and Characterization of p-Type and n-Type Sb2Se3 for Use in Thin-Film Photovoltaic Solar Cell Devices

Preparation and characterization of spray deposited photoactive Sb2S3 and Sb2Se3 thin films using aqueous and non-aqueous media

Antimony sulfide thin films in chemically deposited thin film photovoltaic cells

Hydrazine solution processed Sb2S3, Sb2Se3 and Sb2(S(1-x)Se(x))3 film: molecular precursor identification, film fabrication and band gap tuning

Structure, Morphology, and Photoelectric Performances of Te-Sb2Se3 Thin Film Prepared via Magnetron Sputtering

Systematic Variation of Material Characteristics with Chemical Composition in Antimony Sulfide Selenide Thin Films and Its Relevance to Solar Cell Performance

Microstructural and Optical Properties of Sb2S3 Film Thermally Evaporated from Antimony Pentasulfide and Efficient Planar Solar Cells

Magnetron Sputtered Sb2Se3-based Thin Films Towards High Performance Quasi-Homojunction Thin Film Solar Cells

Electronic and optical properties of Sb 2 Se 3 and Sb 2 S 3 : theoretical investigations

Optical and morphological properties of Ge-incorporated polycrystalline Sb2Se3 thin-film for photovoltaic applications

Preparation and investigation of structure, optical, nonlinear optical and thermoelectric properties of Bi2Se3 thin film

THE STRUCTURE AND CHEMICAL COMPOSITION OF SEMICONDUCTOR MATERIAL Sn(Se0,2S0.8) THIN FILM PREPARED USING EVAPORATION METHOD FOR SOLAR CELL APPLICATION

The Effect of Deposition Time Optimization on the Photovoltaic Performance of Sb2Se3 Thin-Film Solar Cells

Antimony Selenide Solar Cells Fabricated by Hybrid Reactive Magnetron Sputtering

Growth and characterization of Sb2Se3 thin films for solar cells

Effect of Substrate Temperature on Structure, Morphology and Optical Properties of Sb 2 Se 3 Thin Films Fabricated by Chemical-molecular Beam Deposition Method from Sb and Se precursors for solar cells