Abstract:Nanocomposites based on polyolefin elastomer (POE), cyclic olefin copolymer (COC) and multi‐walled carbon nanotubes (MWCNTs) synthesized. By increasing the percentage of (MWCNT) in the POE/COC blend physical properties and electrical the conductivity increased. MWCNT has a greater tendency to be in the POE phase than COC. The subject of this research is a relatively detailed investigation of the rheological, morphological and electrical properties of nanocomposites based on polyolefin elastomer (POE), cyclic olefin copolymer (COC) and multi‐walled carbon nanotubes (MWCNTs). To formulate a mixture of two polymers (COC and POE), the melt mixing method was used and their morphology was studied by SEM technique and it was found that the morphology is of co‐continuous type. When the weight percentage ratio of COC was between 40 and 60, the desired morphology (co‐continuous) appeared. Interfacial tension calculations and TEM images proved that the nanotube particles were stabilized both within the phase of POE as well as at the interface of the two polymer phases. The rheological behavior was analyzed for composite samples containing 0–3 wt % MWCNT. The electrical and rheological percolation thresholds appeared at 1 and a 0.5 percent by weight of nanotube particles, respectively, which may be better to consider as related to the phenomenon of dual percolation. The highest conductivity was obtained for the nanocomposite containing 3% MWCNT. The results of mechanical tests also showed a strong upward trend of properties due to the addition of nanotube. Highlights The effect of COC content on the morphology of POE/COC blend was investigated. The Morphology for the POE/COC blend at low COC content was droplet‐matrix type. MWCNT has a greater tendency to be in the POE phase than COC. Rheological behavior strongly depended on the amount of nanotube particles. The highest conductivity was obtained for the sample containing 3% MWCNT.

Fabrication and Characterization of Elastomeric Polyester/carbon Nanotubes Nanocomposites for Biomedical Application.

Elastomeric nanocomposite scaffolds made from poly (glycerol sebacate) chemically crosslinked with carbon nanotubes.

Carbon Nanotube-Hybridized Supramolecular Hydrogel Based On Peo-B-Ppo-B-Peo/Alpha-Cyclodextrin As A Potential Biomaterial

Preparation, Properties and Cytotoxicity Evaluation of A Biodegradable Polyester Elastomer Composite

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Fabrication of carbon nanotube nanocomposites via layer-by-layer assembly and evaluation in biomedical application

Fabrication of Shish-Kebab-structured Carbon Nanotube/poly（ε-Caprolactone） Composite Nanofibers for Potential Tissue Engineering Applications

Biomimetic PEGylation of Carbon Nanotubes Through Surface-Initiated RAFT Polymerization.

Poly(amino Acid)/carbon Nanotube Nanocomposites with Enhanced Thermal, Electrical, and Mechanical Properties

Fabrication and characterization of toughness-enhanced scaffolds comprising β-TCP/POC using the freeform fabrication system with micro-droplet jetting

Comparative Study of Poly(butylene Terephthalate)/carbon Nanotube Nanocomposites with Non-reactive and Reactive Elastomers: Morphology and Properties

Synthesis and Characterization of Poly(1,2-propanediol-co-1,8-octanediol-co-citrate) Biodegradable Elastomers for Tissue Engineering

Effect of Carbon Nanotubes on the Mechanical Properties and Crystallization Behavior of Poly(ether Ether Ketone)

Processing, Structure, and Properties of Multiwalled Carbon Nanotube/poly(hydroxybutyrate‐co‐valerate) Biopolymer Nanocomposites

Soap-free Styrene-Acrylic/carbon Nanotubes Composite Latex by in Situ Emulsion Polymerization: Preparation, Properties and Characterizations

A Molecular Basis For Enhanced Biocompatibility Of Osteoblasts On Poly(Lactic-Co-Glycolic Acid)-Multi-Wall Carbon Nanotubes Nanocomposite

Polyolefin elastomer/cyclic olefin copolymer/multi‐walled carbon nanotubes nanocomposites: Rheological, morphological, electrical and mechanical study

Mechanical and Rheological Properties of Biodegradable Polycaprolactone/Carbon Nanotube Composites

Electrochemical and bioactive evaluation of polycaprolactone/multi-walled carbon nanotubes coatings on titanium alloy

Polyoxymethylene/carbon Nanotubes Composites Prepared by Solid State Mechanochemical Approach

Polycaprolactone-Based Composite Electrospun Nanofibers as Hybrid Biomaterial Systems Containing Hydroxyl- or Carboxylic Acid-Functionalized Multiwall Carbon Nanotubes