Abstract:Thermo-sensitive polyurethane (TSPU) solution containing varying concentration of in situ-generated TiO2 nanoparticles was successfully prepared via an organic–inorganic hybrid technique, and the final nanocomposite membranes were formed via solution casting. Depending on the membrane formation temperature (Tmf) during casting, completely-opposite gas transport behaviors of the TSPU nanocomposite membranes were observed. When Tmf was lower than the melting point (Tm) of soft segment (PCL10000) in the TSPU, gas permeability coefficients of the nanocomposite membranes were found to increase significantly with increasing nano-TiO2 concentration. Conventional composite theory failed to explain such observation because filler particles are generally considered to create more tortuous diffusion path in the polymer for penetrants, and should thereby lead to a systematic reduction in gas permeability. This counter-intuitive phenomenon was then rationalized by postulating that rigid TSPU chain could not pack efficiently around the TiO2 nanoparticles during solvent evaporation, which resulted in polymer layer with higher free volume at the interface than the bulk polymer regions. Evidences supporting such presumption were provided by (1) density measurement that found negative deviation of actual densities of TSPU nanocomposite membranes from theoretical prediction; (2) positron annihilation lifetime spectroscopy that demonstrated increased free-volume size and concentration within TSPU upon the in situ generation of TiO2 nanoparticles. However, when Tmf was elevated above the Tm of the soft segment, flexible TSPU chain seemed able to pack around the TiO2 nanoparticles as efficiently as in the bulk polymer. In this case, gas transport behavior of the TSPU nanocomposite membranes followed the prediction of conventional composite theory.

Preparation, characterization and formation mechanism of thermoplastic polyurethane nanostructures using solution wetting template.

Fabrication Of Metal-Organic Framework/Polymer Composites Via A One-Pot Solvent Crystal Template Strategy

Miniemulsion Template Polymerization to Prepare a Sub-Micrometer Porous Polymeric Monolith with an Inter-Connected Structure and Very High Mechanical Strength

Membrane Formation Temperature-Dependent Gas Transport Through Thermo-Sensitive Polyurethane Containing in Situ-Generated TiO2 Nanoparticles

Preparation of Low Density Microcellular Thermoplastic Polyurethane with High Compression Properties Based on Micro-Phase Separation Structure

Nanotemplate Fabrication of PEG-Containing Thermosetting Polyurethane Nanoarray toward Enhanced Thermal Storage

A Solvent System Involved Fabricating Electrospun Polyurethane Nanofibers for Biomedical Applications

Synthesis of PNIPAM-co-MBAA copolymer nanotubes with composite control.

Preparation of hollowTiO2 nanospheres with highly porous surface for effective nucleating agents in supercritical carbon dioxide foaming of thermoplastic polyurethanes

Nanostructures and Surface Hydrophobicity of Self-Assembled Thermosets Involving Epoxy Resin and Poly(2,2,2-Trifluoroethyl Acrylate)-Block-poly(ethylene Oxide) Amphiphilic Diblock Copolymer.

Temperature-induced Evolution of Micro-structure and Chain Dynamics in Thermoplastic Polyurethane with Low Hard Segment Content as Studied by In Situ Synchrotron SAXS and Time-Domain NMR Experiments

Synthesis of Thermosensitive Pnipam-Co-Mbaa Nanotubes by Atom Transfer Radical Polymerization Within A Porous Membrane

Thermal stability, surface wettability and mechanical behavior of highly ordered ZnO ‐doped thermoplastic polyurethane films with hierarchically porous structures

Interfacial Interaction In Anodic Aluminum Oxide Templates Modifies Morphology, Surface Area, And Crystallization Of Polyamide-6 Nanofibers

The Study on the Microstructures and High Performances of Melt Blending Polyurethane/Multiwalled Carbon Nanotubes Composites

FACTORS CONTROLLING THE PREPARATION OF POROUS POLYURETHANE MEMBRANES VIA THERMALLY INDUCED PHASE SEPARATION

One-Shot Synthesis of Thermoplastic Polyurethane Based on Bio-Polyol (Polytrimethylene Ether Glycol) and Characterization of Micro-Phase Separation

Study on thermoplastic polyurethane/montmorillonite nanocomposites

Preparation and Characterization of Polyurethane/Multi-Walled Carbon Nanotubes Composites with Multi Functional Performance

Preparation and Characterization of Nano-Tio2/Poly (methyl Methacrylate) Hybrid Latex by Reverse Microemulsion Method and In-Situ Polymerization

Study on Properties and Preparation of Thermoplastic Polyurethane Hot-Melt Adhesive