Abstract:Electrochromic devices (ECDs) exhibiting tunable optical and thermal modulation in the infrared (IR) region have attracted extensive attention in recent years due to their attractive application prospects in both military and civilian settings. However, considering the continuous energy supply needed for driving the device operation, it is desired to develop advanced IR-ECDs with low energy consumption. Herein, a flexible self-driven IR-ECD is constructed for achieving variable optical and thermal management in a low-energy mode. In this device, a built-in potential difference of 1.36 V exists between the EC polyaniline cathode and the aluminum foil anode. Consequently, there is a rapid and obvious increase in the IR reflectance of the device after connecting the two electrodes. Such a self-driven reflectance contrast is over 20% at the wavelength of 1500 nm, and the coloration efficiency of the device reaches up to 93.6 cm2 C–1. Meanwhile, the maximum apparent temperature modulation on the surface of the device reaches up to 5.6 °C. Then, the self-driven IR-ECD could recover to its original state driven by a solar cell, indicating good reversibility and stability. We anticipate that this work may provide a new insight into developing advanced self-driven IR-ECDs for applications in dynamic military camouflage and commercial thermal control.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14123.FTIR spectra of the PANI electrode; CV behaviors of the PANI electrode with different scan rates; cross-sectional SEM images of the PANI electrode with different polymerization charges; CV behaviors of the PANI electrode with different polymerization charges in 2.5–25 μm; IR reflectance of the PANI electrodes with different polymerization charges; the ΔR between colored and bleached states of the PANI electrodes; the reflectance spectra of Au electrodes and PANI electrodes measured at different Au thicknesses; thermal control of the PANI films with different polymerization charges; open-circuit voltage of the self-driven IR-ECD; electrochemical performance of the self-driven IR-ECD; the changes in the structure of the device before and after 100 cycles; optical memory performance of the self-driven IR-ECD; the schematic setup for the measurement of thermal regulation performance of the IR-ECDs; digital photo of the solar panel with a stable voltage output; the comparison of the performance of other NIR-EC films and devices; EC performance of Al-based devices in previous reports; and the ΔR values of the self-driven IR-ECD after different bending cycles (PDF)This article has not yet been cited by other publications.

Preparation and Technology Study of Flexible Reflective Electrochromic Devices Based on Polyaniline

Preparation of Polyaniline Doped with Acid and Polymer Using Electrochemical Deposition

Electrochromic Polymers: From Electrodeposition to Hybrid Solid Devices

Ultrathin flexible electrochromic devices enabled by highly transparent ion conducting films

Enhancing infrared electrochromic properties of the poly(styrene sulfonate) doped polyaniline composite film by morphology regulation

Highly-flexible monolithic integrated infrared electrochromic device based on polyaniline conducting polymer

Self-Driven Infrared Electrochromic Device with Tunable Optical and Thermal Management

Achieving variable infrared emissivity modulation regions of poly(aniline) films:the effect of film surface morphology on the optical tunability

Studies on Preparation and Electrochemical Properties of Electrochromic Conductive Polyaniline Solid Supercapacitor

Inkjet printing of 2D polyaniline for fabricating flexible and patterned electrochromic devices

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Poly(neutral red), poly(crystal violet), and poly(congo red) films as color filters for producing new color states in polyaniline electrochromic system

Preparation and infrared shielding of polyaniline@MWCNTs flexible electrochromic device based on cotton fabric

Preparation of electrospun polyacrylonıtrile (PAN) nanofıber membrane gel electrolyte and its application in TiO2-based electrochromic devices

A Flexible Electrochromic Device Based on PEDOT: PSS Working in Visible and Infrared Band

Employing polyaniline/viologen complementarity to enhance coloration and charge dissipation in multicolor electrochromic display with wide modulation range

Approach to Significantly Enhancing the Electrochromic Performance of PANi by In Situ Electrodeposition of the PANi@MXene Composite Film

Robust and swiftly multicolor Zn2+-electrochromic devices based on polyaniline cathode

Electrochromic Nanochannels for Visual Nanofluidic Manipulation in Integrated Ionic Circuits

Capacitive Properties of the Flexible and Semi-transparent Electrodes based on the Polyaniline Electrochemically Deposited on Ti Mesh

Pnai Films Fabricated by Pre‐Nucleation Electrodeposition Method with High Electrochemical Activity: Parameter Optimization and Analysis