Abstract:Sustainable and renewable energy resources are in increasing demand due to the depletion of fossil fuels and climate change. Therefore, to develop efficient energy storage systems which are capable of collecting unsteady state energy from sustainable energy resources, i.e., solar, wind, and hydro energy and outputting stable energy supply is of critical importance [1, 2]. Bridging the batteries and the conventional capacitors that deliver high energy density but suffer from relative low power density, high manufacturing cost, and limited life cycles for the former and even though high power density yet too low energy density for the latter, electrochemical capacitors (ECs) offer great advantages of high power capability and exceptional cycle life and reliability [3, 4], ECs possess promising potentials for future applications ranging from portable electronics to hybrid electric vehicles, and to large industrial scale power and energy managements [5]. ECs can be classified into two general categories, electric double layer capacitors (EDLCs) and pseudocapacitors, based on different energy storage principles [6]. In the case of EDLCs, energy storage is achieved via electrostatic accumulation of charges at the electrode material and the electrolyte interfaces. Carbonaceous materials of large specific area, i.e., activated carbons (ACs) [7], carbon nanotubes (CNTs) [8], ordered mesoporous carbons (OMCs) and graphene nanosheets (GNS) [9, 10] are usually utilized as the main component of EDLCs. EDLCs are well known for high power density (>10 KW Kg -1 ) and long cycle life (>10 6 cycles) [11], but low energy density (<5 Kh/kg) [12, 13] remains the challenge. In contrast to EDLCs, pseudocapacitances arise from electron transfer that follows reductionoxidation (redox) reactions in the pseudocapacitors [14]. Transition metal oxides including MnO2 [15], RuO2 [16], MoO3 [17], Co3O4 [18] and VOx [19], and electrically conducting polymers (CPs), i.e., poly(aniline) (PANI) [20-22], poly(pyrrole) (PPy) [23-25], and polythiophenes (PThs) [26, 27], have been studied as pseudocapacitive materials. However, the relatively high electrical resistance giving rise to lower power density with respect to transitional metal oxides imposes a limitation for their supercapacitor applications. Conjugated polymers (CPs) have been considered as ideal candidates for electrochemical energy storage owning to high electrical conductivity and coulombic efficiency besides their mechanical versatility, synthetic tailorability, low cost and easy processability [28]. The existing problem regarding CPs is their poor cycling stability from the swelling and shrinking during the cycling redox reactions, which imposes limitations on their applications as electrochemical capacitors [4]. Meanwhile, electrochromic materials that undergo reversible optical changes in the material via the reduction (gain of electrons) or oxidation (loss of electrons) on the passage of an electrical current upon the application of an appropriate potential have gained wide popularity from smart windows for use in cars and buildings, display devices for optical information and storage, and so forth [29, 30]. The electrochromic properties of the conducting CONDUCTIVE POLYANILINE NANOCOMPOSITES: ELECTROCHROMIC BEHAVIOR, ELECTROCHEMICAL ENERGY STORAGE AND GIANT MAGNETORESISTANCE SENSOR

Electrochromic Nanochannels for Visual Nanofluidic Manipulation in Integrated Ionic Circuits

Integrated Electrochromic Supercapacitors with Visual Energy Levels Boosted by Coating Onto Carbon Nanotube Conductive Networks

In Situ Preparation and Determination of Electrochemical and Electrochromic Properties of Copper Phthalocyanine-Polyaniline Nanocomposite Films

Near-Infrared and Multicolor Electrochromic Device Based on Polyaniline Derivative

Electrochromic Polymers: From Electrodeposition to Hybrid Solid Devices

Ion diffusion and optical switching performance of 3D orderednanostructured polyaniline films for advanced electrochemical/electrochromic devices

An Electrochromic Film Device to Teach Polymer Electrochemical Physics

Ultrathin flexible electrochromic devices enabled by highly transparent ion conducting films

Preparation of Nanocellulose-Based Polyaniline Composite Film and Its Application in Electrochromic Device

Self-Assembled Polyaniline/Ti<sub>3</sub>C<sub>2</sub>T<sub>x</sub> Nanocomposites for High-Performance Electrochromic Films

Enhancing the Electrochromic Performances of Polyaniline Film Through Incorporating Polyaniline Nanofibers Synthesized by Interfacial Polymerization Approach

Poly(neutral red), poly(crystal violet), and poly(congo red) films as color filters for producing new color states in polyaniline electrochromic system

Electrochromic Properties of the Multicolored Polyaniline Nanofilms

Employing polyaniline/viologen complementarity to enhance coloration and charge dissipation in multicolor electrochromic display with wide modulation range

Bioinspired Dynamically Switchable PANI/PS‐b‐P2VP Thin Films for Multicolored Electrochromic Displays with Long‐Term Durability

Conductive polyaniline nanocomposites : electrochromic behavior , electrochemical energy storage and giant magnetoresistance sensor

Electrochromic Electrode Based on Polyaniline and Silver Nanowires Based Localized Surface Plasmon Resonance

Elaboration and study of a PANI/PAMPS/WO3 all solid-state electrochromic device

Tungsten Oxide Nanowires and Polyaniline Hybrid Film-Based Electrochromic Device with Multicolor Display and Enhanced Capacitance

Layer-by-Layer-Assembled Polyaniline/MXene Thin Film and Device for Improved Electrochromic and Energy Storage Capabilities

Robust and swiftly multicolor Zn2+-electrochromic devices based on polyaniline cathode