Abstract:Device reliability is of great significance to resistive switching applications, and reset failure dominates the deterioration of cycling endurance. Although it has been found that the excessive aggregation of movable ions could lead to the reset failure, the quantitative studies on the defect movement have seldom been conducted. Hence, the Ni/Al2O3/p(+)Si sandwiched structure is fabricated by magnetron sputtering, and the reset failure phenomenon is analyzed. The measurements on the resistive switching behaviors demonstrate that the space-charge-limited current mechanism is responsible for the electroforming process, while the current conduction in subsequent switching cycles obeys the hopping mechanism. Temperature-dependent I-V measurements reveal that the resistance states are closely related with both the hopping distance (R) and hopping energy barrier (W) between adjacent localized states. Short hopping distance of 0.66 +/- 0.02nm and low hopping activation energy of 1.72 +/- 0.06meV will lead to the unrecoverable breakdown of Al2O3 dielectric layer, large leakage current, and deteriorative memory window. 1.9at.% ZnO doped into Al2O3 dielectric layer can lower the switching voltages and the compliance current of the devices, which will alleviate the aggregation of the localized states during the cycling process. As a result, the R and W values in high resistance state are stabilized at 2.24 +/- 0.04nm and 5.76 +/- 0.11meV during 100 direct current switching cycles, and the memory window is significantly improved. A physical model is proposed to understand the reset failure mechanism of Ni/Al2O3/p(+)Si devices.

Competition of Resistive-Switching Mechanisms in Nickel-Rich Nickel Oxide Thin Films

Effect of Heat Diffusion During State Transitions in Resistive Switching Memory Device Based on Nickel-Rich Nickel Oxide Film

Microscopic Mechanism for Unipolar Resistive Switching Behaviour of Nickel Oxides

Evolution of Ni Nanofilaments and Electromagnetic Coupling in the Resistive Switching of Nio

Electrode-Dependent Resistive Switching Characteristics of Sr(Ti,Sn)O-3 Thin Films

Magnetron Sputtered Ni-Rich Nickel Oxide Nano-Films For Resistive Switching Memory Applications

Magnetoresistance Behavior of Conducting Filaments in Resistive-Switching NiO with Different Resistance States.

Abnormal Resistance Switching Behaviours of NiO Thin Films: Possible Occurrence of Both Formation and Rupturing of Conducting Channels

Switching Failure Behaviors and Doping Enhanced Performances of Ni/Al2O3/p(+)Si Resistive Switching Devices

Realization of Transient Memory-Loss with NiO-based Resistive Switching Device

Intrinsic Nanofilamentation in Resistive Switching

In Situ Observation of Nickel As an Oxidizable Electrode Material for the Solid-Electrolyte-Based Resistive Random Access Memory

Characteristics and Mechanism of Conduction/set Process in TiN∕ZnO∕Pt Resistance Switching Random-Access Memories

Bipolar Resistive Switching in BiFe 0.95 Zn 0.05 O 3 Films

Unipolar Resistive Switching Effect and Mechanism of Solution-Processed Spinel Co3o4 Thin Films

Mechanism For Resistive Switching In An Oxide-Based Electrochemical Metallization Memory

Flexible Nanoscale Memory Device Based on Resistive Switching in Nickel Oxide Thin Film

Electrode Dependence Of Resistive Switching In Mn-Doped Zno: Filamentary Versus Interfacial Mechanisms

Controllable Filament With Electric Field Engineering for Resistive Switching Uniformity

Intrinsic and Interfacial Effect of Electrode Metals on the Resistive Switching Behaviors of Zinc Oxide Films

Improved Resistive Switching Performance and Realized Electric Control of Exchange Bias in a NiO/HfO2 Bilayer Structure.