Abstract:Hydrogen permeation through vanadium/palladium (V/Pd) metal composite membranes is an effective and practical method for separating hydrogen from gas mixtures. In order to gain insight into the correlation between the interfacial structure and hydrogen adsorption/diffusion properties of the catalytic Pd layer bonded to the metal membrane, and then improve the ability of the alloy membrane to purify hydrogen, the first principle based on the density functional theory was used to study the hydrogen adsorption/diffusion behavior at the V/Pd metal composite membrane interface. The results show that because the charge density at the V/Pd interface increases with the V/Pd bonding, the hydrogen atom (H) dissolution energy increases with the approach to the interface, and has the highest dissolution energy near the V/Pd interface (0.567 eV). Hydrogen migration energy barrier calculations show that compared with the maximum energy barrier for horizontal diffusion of H along the V/Pd interface (0.64 eV), the H vertical V/Pd interface energy barrier (0.56 eV) is smaller, thus H tends to migrate vertically V/Pd interface and diffuse from the Pd layer to the V substrate side. As the hydrogen solvation energy of the Pd layer at the V/Pd interface (0.238 eV) is higher than that of the V membrane side (-0.165eV), H will accumulate at the V film side of the interface, which is easy to cause hydrogen embrittlement. Calculations of Pd/Fe doping of the V matrix show that compared with the undoped energy barrier (0.56 eV), Pd/Fe doping can significantly reduce the maximum energy barrier (0.45/0.54 eV) in the diffusion path of the interface, which is favorable for hydrogen permeation and diffusion. And the doped interface can inhibit the interdiffusion of V and catalytic Pd layers, which improves the structural stability of the composite film.

Effect of intermetallic diffusion between Pd and Ti-Al alloy on the performance of Pd/Ti-Al alloy composite membranes

Enhancement of Hydrogen Permeation Stability at High Temperatures for Pd/Nb30Ti35Co35/Pd Composite Membranes by HfN Intermediate Layer

Microstructural Investigation and On-Site Repair of Thin Pd-Ag Alloy Membranes

INVESTIGATION OF GAS TRANSMISSION CHARACTERISTICS OF THIN-FILM MEMBRANE MATERIALS BASED ON PALLADIUM ALLOYS

Changes in hydrogen permeability and surface state of Pd?Ag/ceramic composite membranes after thermal treatment

Palladium membranes supported on porous ceramics prepared by chemical vapor deposition

Study of N Value and Α/β Palladium Hydride Phase Transition Within the Ultra-Thin Palladium Composite Membrane

Tailoring the Hydrogen Transport Properties of Highly Permeable Nb51W5Ti23Ni21 Alloy Membrane by Pd Substitution

Hydrogen Permeance and Surface States of Pd‐Ag/ceramic Composite Membranes

Studies on the Preparation of Pd/Alumina/Porous Stainless Steel Membranes for Hydrogen Separation

Degradation of Pd/Nb30Ti35Co35/Pd hydrogen permeable membrane: A numerical description

Preparation and Characterization of Pd and Pd-Ni Alloy Membranes on Porous Substrates by MOCVD with Mixed Metal Β-Diketone Precursors

Enhancement for hydrogen transport properties by tailoring lattice matching in V-Pd-Fe ternary alloy membrane

Preparation Of Pd-Y Alloy Membranes On Porous Alumina By Mocvd Using Mixed Metal Beta-Diketone As Precursors

Microstructures of Directionally Solidified Nb15Ti55Fe30 Alloy and Its Hydrogen Permeation Properties in the Presence of H2S

Design of hydrogen separatinwg Nb-Ti-Fe membranes with high permeability and low cost

First principles study of vanadium/palladium interface interactions and their hydrogen absorption properties

Effects of hydrogen on diffusion bonding of TiAl-based intermetallics using hydrogenated Ti6Al4V interlayer

Recent Advances in Pd-Based Membranes for Membrane Reactors

A Two-Step Electroless Plating Method for Pd Composite Membranes with Enhanced Hydrogen Selectivity and Superior High-Temperature Stability

Effects of Pd Addition on the Interfacial Reactions Between Cu and Al During Ultrasonic Welding